Modern life is so dynamic and energetic that many people repeatedly make a lot of phone calls in one day. In order not to miss the most significant of them - from an employee or a loved one, it is better to first take care of connecting the 2nd line to phone .
Instructions
1. More often than everyone as a 2nd line on mobile phone“Standby” mode is applied. Before you connect it to your phone, add this service to your tariff plan. To do this, call the operator mobile communications By short number technical support and ask to activate Call Waiting mode. As soon as the operator makes changes to the tariff plan - as usual, the service is connected for free - you can start changing the settings actually phone .
2. To activate the connected “Call Waiting” service, go to the mobile phone menu and click on the “Options” or “Settings” item, depending on the unit model. After this, find the “Call”, “Phone” function or another function by analogy and check the opposite of the “Call Waiting” mode. This will put the service into energetic mode.
3. When during further conversation you hear beep, look at the screen. If the display shows a message about a second call, press the “result” button and start talking without interrupting the line of the first call. At this time, the previous subscriber will listen to the standard waiting melody.
4. If you want to connect a second line to a landline telephone, first check whether the unit supports a similar mode. Some old telephone units are not capable of switching conversation modes from one line to another. If you have just such an outdated model, purchase a new model in the showroom cellular communication or a store selling household appliances. Then contact the telephone company that provides your non-movable phone service. Bring a certain package of documents, write an application according to the example and wait until the second landline line is connected according to the processed application.
Occasionally, when working with a computer, it is required that it be sufficiently for a long time was in the on state, but the computer may be in a passive state mode. In order not to waste extra electricity and reduce the computer's power consumption by reducing the processor power, you can start the mode expectations or computer sleep mode. In Windows Me or Windows XP you can do this at any time.
Instructions
1. First, open the screen settings and check whether the computer supports standby mode, configure the power consumption settings at primitive. Both in an ordinary desktop and laptop computer, you can put it into sleep mode by clicking on the “Start” menu, and then clicking on the “Close” button. A window will open in which, of all the buttons that appear, you need to prefer the “Sleep Mode” button. Click OK so that the computer enters mode expectations .
2. If necessary, make additional settings if you want the computer to go into standby mode when you press the power button. To do this, open the Start menu and go to Control Panel.
3. Open the “Power Options” section and in the properties in the window that opens, select the “Advanced” tab. Configure the properties so that when you press the power button once, the computer goes into sleep mode. Click “Apply” and then OK. Press the power button to make sure that the metamorphosis has taken effect.
4. If you use a laptop, switching to sleep mode will become even easier for you - on most laptops, this mode starts when you lower the lid of the computer while it is on. If your computer does not have these settings, open the Start menu, go to Control Panel and go back to the Power Options section.
5. Open properties, select the “Advanced” tab and set the necessary parameters in the window - when you close the lid, the laptop should go into sleep mode. Click OK.
Video on the topic
Powerful mode is usually called a direct connection or the use of a firewall with manual port forwarding. The operation of enabling the energetic mode is performed standard means operating system Windows and does not require additional software.
Instructions
1. Run installed browser and log into the web interface of the modem you are using. To do this, enter the value 192.168.1.1 in the field address bar browser (for D-Link modem).
2. Check the Enable UPnP field and click the Apply button to initiate the procedure for enabling the power mode.
3. Use the Save and Reboot option to apply the selected changes and click the Start button to open the main menu of the Microsoft Windows operating system.
4. Go to “Control Panel” and expand the “Network Neighborhood” node.
5. Select the “Display icons for network UPnP devices” command in the “Network tasks” section and identify the modem you are using in the “Local network” group.
6. Go to the “Settings” menu of the StrongDC++ program and select the “Connection Settings” item.
7. Check the Firewall with UPnP checkbox and restart the application to use the selected changes.
8. Return to the main Start menu and go to Control Panel to perform the required UPnP service settings procedure.
9. Expand the Administration node double click mouse select the “Services” group.
10. Enable the "Multifunctional PnP Device Host" and "SSDP Discovery Service" services and select the "Auto" option in the "Startup Type" section.
11. Return to Control Panel and expand Windows Firewall.
12. Go to the General tab and check the Enable box.
13. Uncheck the "Don't allow exceptions" box and go to the "Exceptions" tab.
14. Check the UPnP Infrastructure checkbox and click OK to confirm the command.
Video on the topic
Useful advice
Troubleshooting power mode enable can be done through the settings settings Windows Firewall using direct connection resolution with manual port forwarding.
The second line on the phone is often connected when the first line is often busy, when many calls come in, and one or more of them may turn out to be the main one.
You will need
- – telephone using 2nd line.
Instructions
1. To connect a 2nd line to your phone, call the technical support number of your cellular operator and activate call waiting service. In this case, during your conversation with one subscriber, the speaker from the other will be in standby mode, or you will be able to make a call on the 2nd line yourself, without interrupting the 1st speaker.
2. Please note that during a conversation it is possible to switch between subscribers. Also, in some cases it is important to connect the conference call service. Also, when using the 2nd line, you reduce the number of chances of missing a significant volume, especially if you have a mechanical caller ID connected. This service can also be activated from the operator or at the local GTS office.
3. To connect a 2nd line in your landline phone Contact the service office of the telephony service contractor with a package of documents that meets the requirements. Fill out the application form, an example of which you can find at the reception, and wait until your application is processed, after which a second line will be connected to your phone.
4. Make sure your telephone unit supports a similar talk mode, if it doesn't, get the latest non-movable phone with dual line talk. These can be purchased at mobile phone stores and points of sale of household appliances.
5. In order to enable the mode of 2 active SIM cards, purchase a special telephone unit. Please note that some of them easily have an adapter for a 2nd SIM card in their design, and you have to switch between them. More new models support the operation of both operator cards at the same time. Configure call parameters for them in the corresponding unit menu.
Useful advice
Connect a second line on your mobile when registering a SIM card.
A mobile phone from any manufacturer, including Nokia, if it is turned on, can be in mode conversation or mode expectations. In order to put it into standby mode, you need to simply turn it on or end all current conversations. For most Nokia models, the key when switching to standby mode is the end call key.
Instructions
1. Press and hold the key (second from the top on the right side of the keyboard, the one with the red handset) hang up until the display lights up if your phone is switched off. If the unit is discharged or faulty, there will be no reaction on its part to this action. If the battery is discharged, you will need to connect the phone to an outlet and wait a little until it accumulates a little electricity, then repeat the operation. If your phone is faulty, have it repaired.
2. If the reason for disconnecting your Nokia phone When the battery is completely discharged and the unit is being recharged, only an indicator may appear on the screen indicating that the phone is charging. Press the end call key again and hold it for a few seconds until the indicator disappears. Then press and hold again until the display lights up.
3. Enter the PIN code as requested by the unit and press the selection confirmation key - top left. If the PIN code is correct, a message will appear on the screen that the code has been accepted, after which the Nokia screensaver will appear, after which the phone will turn on and work in standby mode. If you refused PIN code protection or it was not initially set, the phone will turn on immediately.
4. End all current calls to switch from talk mode to standby mode. To do this, press the end call key, indicated by a red tube and located in the upper right part of the keyboard. If you have several calls in progress, end not only the current one, but also all the calls you are holding with the help of the end key. After this, the phone will go into standby mode, and you will be able to accept a call if someone dials your number, call the desired subscriber, or use additional options: send or receive SMS (their phone will also receive in talk mode), use the built-in radio, do photograph or video, use an organizer, phone book, various applications, games, etc.
Not all MTS subscribers know about the ability to communicate with two people at the same time. For the most part, many of them are sure that they can make a second call (or receive one) only after the first one ends. However, this is not entirely true. Thanks to the “Second Line” service, you can simultaneously communicate with two people on different lines and not miss important calls. What are the conditions of the “Second Line” service on MTS, how to connect it and how to deactivate it, if necessary, will be discussed in the current article.
Who can use the service?
All subscribers of the cellular operator we are considering can use the second line. Moreover, for those clients who entered into an agreement and purchased a SIM card after 2009, it is activated by default, that is, it is included in the initial package of services. It’s not easy to find it in your list of options, because the official name of the service is “Call Waiting and Holding.” Customers who purchased a number before 2009 can also take advantage of the opportunity to install a second line. However, in this case you will have to work a little to make it available. How to connect a second line to MTS will be described below.
Financial conditions for using the service
The Call Waiting and Holding service is provided completely free of charge. Its connection is also free of charge. Absent subscription fee. However, there are some changes in call tariffs. In particular, this applies when making two calls simultaneously. For example, you first called your work colleague, then while talking to him you remembered that you urgently need to call a friend. If ending the first call is not entirely convenient, you can call a friend directly during the conversation.
Thus, you will make two outgoing calls at the same time. In this case, charging will be carried out according to the tariff plan: the cost of two calls will be summed up and debited from the account after their completion. In the case of incoming calls, charges will not be made, since they are free. The exception is cases when we're talking about about roaming (within the network, abroad).
“Second Line” service on MTS: how to connect on a mobile device?
Activation of the service is possible in two ways:
- via USSD functionality (to connect, you must enter the following request on the device *43#);
- through the call settings in the settings menu of your gadget (you need to find the second line or “Waiting and holding” in the list).
So, you are interested in the “Second Line” service on MTS. How to connect it if you relatively recently purchased a SIM card from MTS. Rest assured that the service we are considering is already activated on it. Of course, if you forcibly deactivated it, then you will no longer be able to use it. Through the phone menu or through a similar command *43#, the “Second Line” service (on MTS) is also disabled. How to reconnect it and is it possible? You can activate the service an unlimited number of times.
How to use?
After the list of options on your number has been supplemented with the “Second Line” service, when calling your number, the subscriber will hear the usual beeps, even at the moment when you are already communicating with someone. In this case, you will be given sound notification about a new call. You can:
- accept the second one, putting the first one on hold;
- end the first call and start communicating with the person who reached you on the second line;
- do not interrupt the current call and reject the incoming one.
In this article, we looked at how to connect the “Second Line” to MTS (Russia) and what opportunities this option provides. We remind you that she does not have a subscription. fees and is activated on the number for free.
When talking with friends or family on abstract topics, you need to take care not to miss an important call, for example, from your boss or work colleagues. To do this, Beeline provides the ability to connect a second line provided as part of the Call Waiting service. She allows you to accept a second call by placing the current call on hold.
In order to connect a second line on Beeline, you need to dial the USSD command *43#. After connecting we will be able accept two calls at once. The service provides the following features:
- Accepting a call during an ongoing conversation - press number 2 and the call button;
- Making a call during an ongoing conversation - press number 2, then the call key, dial the phone number and press the call key again.
In both cases, the first conversation will not be interrupted, but will remain hanging in anticipation. You can return to the first conversation by pressing two and the call key. When the second call is received, the called party hears short beeps and the caller's number appears on the screen - after which you can take appropriate actions.
You can manage calls not only using the number keys, but also using the phone itself. All modern and even outdated phones support second line control by pressing control keys– when accepting the second call, appropriate prompts will be displayed on the screen. As already mentioned, the second line on Beeline is provided completely free of charge.
As for the cost of calls, the prices do not change - incoming calls remain free, and outgoing calls are charged in accordance with the direction used (if you are in home network). If for some reason the second line begins to fail, responding to callers with busy signals, you should reconnect the “Call Waiting” service. To do this, you need to use the USSD command *110*041# or call the special service number 067409041.
After reconnecting the service, it should show correct operation. If you encounter any difficulties, contact the support service at 0611.
How to set up a second line via phone
You can activate the “Call Waiting” service and get a second line at your disposal using your mobile phone. Looking at the call settings menu, we will find the “Call Waiting” item there (or “Second Line”, which depends on the phone model). By selecting this item, we can get information about the service status. Its connection is also made here.
You can receive information about all missed calls when your phone is turned off or is out of network coverage using the Beeline “They called you” service, which we talked about earlier.
Users of the “Personal Account” can activate the “Call Waiting” service directly on the Beeline website by logging into the service using their username and password.
How to disable the second Beeline line
Does having a second line cause any inconvenience? Well, then it's better to turn it off. For this we can use " Personal account"or the call settings menu in your mobile phone. The second line will be disconnected almost immediately. If you want to return this opportunity, you can use the USSD command *43#.
The “Call Waiting/Hold” service consists of two modes: Call Waiting and Call Hold.
Call waiting
Call Waiting mode - allows you to telephone conversation receive a sound notification and information on the mobile phone display about the receipt of another phone call. In this case, the sound signal about an incoming call will be heard only by the subscriber to whose address this call is received.
To use the “Call Waiting” mode after adding the “Call Waiting/Hold” service, you must activate it through the mobile phone keypad.
At the same time, on the display of the device you can see a message about the result of the actions performed.
If the “Mobile Office” and “Call Waiting/Hold” services are activated, the “Mobile Office” service will have priority. When receiving/transmitting a fax or data, the Call Waiting/Hold mode does not work and the subscriber will hear busy tones.
Call hold
“Call Hold” mode - allows you to make outgoing call or accept incoming call from the second subscriber, while the first subscriber will be in hold mode.
Also, the mode allows you to switch between calls without losing them, i.e. alternately talk with two subscribers.
When working with the “Call Waiting/Hold” service, it is better to use standard GSM control codes:
It is also possible to use the mode through the menu telephone set(see instructions for the phone).
Attention!
If a subscriber calls numbers 0870 (Mobile Assistant), 0890 ( Contact Center MTS), 0876 (financial control), “Call Hold” mode doesn't work.
How to add a service?
Service " Call waiting/hold" can be added either when concluding a contract or to a previously concluded contract:
- through ;
- through ;
- by calling the MTS Contact Center (0890).
The “Call Waiting/Hold” service is included in the basic network settings package of JLLC “Abundant TeleSystems” and from 06/01/2016. is provided to all MTS subscribers in “active mode”.
What is the price?
The service is added free of charge and has no subscription fee.
What if I add both services?
When the “Call Waiting/Hold” and “Call Forwarding” services are activated simultaneously using a conditional forwarding code (code 61 “no answer” or code 67 “busy”), the “Call Waiting” mode is activated first, and then the “Call Forwarding” mode.
During a conversation, the subscriber sees the expected (second) call on the telephone display and hears a characteristic sound signal. The subscriber can answer the call, i.e. he will use the Call Waiting mode.
If, within the time specified for forwarding, the subscriber does not answer the expected (second) call, then the “Call Forwarding” mode will work for the second call. And the second call will be forwarded to the number specified for forwarding.
Tariffication
The subscriber pays only for outgoing calls, depending on tariff plan. All incoming calls to a mobile phone are free, except calls while in roaming.
“Call waiting/holding” or “Second line” is a service from Tele2, thanks to which the subscriber has the ability to accept or reject incoming calls from other subscribers during a conversation. Some mobile operators this function activated with the default SIM card. Tele2 allows its customers to decide for themselves: do they want to be available during a conversation or not? Let's look at how to connect a second line on Tele2 and how to use it in more detail.
The essence of the service
The benefits of the call waiting service are obvious. For example, you are waiting for an important business call, and at the same time your best friend calls, deciding to tell you something interesting in the next half hour. Or you make dozens of work calls every day and at the same time do not want to miss equally important incoming calls. With the “Second Line” service on Tele2 you can safely talk on mobile phone as much as needed.
The service works as follows. During a conversation, the phone will signal a second incoming call in the form of short tone beeps. The number from which the call is being made will appear on the screen, as well as the name if this number entered into the phone book. In this case, the subscriber can perform the following actions:
- answer a new call, causing the first conversation to go on hold;
- reject a new call and continue the current conversation;
- don't react to new challenge At all, after a while the second call will be dropped automatically.
If the second call is answered, you can repeatedly switch between the two subscribers, alternately placing them in hold mode. If you ignore the next incoming call, the beeps will continue until the second subscriber hangs up. In addition, it is always possible to make new outgoing calls without interrupting the current conversation, but only leaving it on hold.
With the “Call Hold/Waiting” service, the subscriber himself determines which call has higher priority for him. Therefore, it is recommended to connect this option to every Tele2 subscriber, especially those who talk on the phone for a long time.
Connecting and disconnecting the service
Now briefly about how to connect and disconnect the second line. To manage work of this service mobile operator Tele2 has reserved two USSD commands:
- * 43 # – connection;
- # 43 # – shutdown.
Each time after sending a request, a message is sent to your phone about a change in the status of the service.
There is another way to activate the second line on Tele2. To use it, you need to go to the phone menu “Settings-Calls”, select a SIM card and check the box next to the “Parallel call” item. The exact names of menu items depend on the phone/smartphone model.
If the second line is disconnected at mobile device, then during a conversation the next caller will receive a “Busy” signal in the form of short beeps. If the option is enabled, then instead of short beeps the phrase will be repeated: “Please wait, the subscriber is busy”
Price
Activation (deactivation) of the “Second Line” service on Tele2 is free of charge, regardless of the chosen method and the number of repetitions. There is no charge for the service. All voice calls while using the service are charged according to the current tariff plan.
