How to reset ZTE to factory settings (Hard reset). Full reset or how to perform a Hard Reset on ZTE Skate Full reset zte blade a5

ZTE Blade A5- it's branded chinese smartphone, which received a score of 0 for performance. Here you can download firmware (for all operators, firmware ROM), find out how to reset settings or get root. There are also instructions on ZTE. This smartphone needs further evaluation. On board it has - ARM Cortex-A7, 1200 MHz

Characteristics

Type: smartphone
Operating system: Android 4.4
Case type: classic
nCase material: plastic control: touch buttons
SIM card type: micro SIM+nano SIM
Quantity SIM cards: 2
Multi-SIM operating mode: alternating
Weight: 127 g
Dimensions (WxHxD): 63.8x125x11.5 mm
Screen type: color TFT, 16.78 million colors, touch
Type touch screen: multi-touch, capacitive
Diagonal: 4 inches.
Image size: 800x480
Pixels per inch (PPI): 233
Camera: 3.20 million pixels, LED flash
nVideo recording: yes
Front camera: yes, 2 million pixels.
Audio: MP3, FM radio
Headphone Jack: n3.5mm
Standard: GSM 900/1800/1900, 3G
Interfaces: Wi-Fi 802.11n, Bluetooth 2.1, USB
Satellite navigation: nGPS
Processor: ARM Cortex-A7, 1200 MHz
Number of processor cores: 4
Built-in memory: 4 GB
Volume RAM: 512 MB
Memory card slot: yes, up to 32 GB
Battery capacity: 1400 mAh
Charging connector type: micro-USB control: voice dialing, voice control
Airplane mode: yes
Sensors: light, proximity
Flashlight: yes

ZTE Blade A5 review

Hello! My problem is this. When you turn on the smartphone, a message appears that an error has occurred in the application. I click OK, the same warning pops up, but only about another application. I click OK again and again the error is in another application. And so on ad infinitum. I tried to reset the settings to factory settings, using the key combination (volume and on) did not help. After restarting, 5-10 seconds are normal. then again this info.

Firmware for ZTE Blade A5

ϒ Official firmware Blade_AF5_B03 on Android based 4.4 KitKat -
ϒ Stock firmware 1.0.1 (with SIM lock) for A5 -
ϒ Stock firmware 1.0.1 (without SIM lock) for A5 -
ϒ Custom Android firmware 7.0 Nougat -

If a custom or official firmware on ZTE, then create a topic on the forum, in the section, our specialists will quickly and free of charge help, incl. with backup and manuals. Just don’t forget to write a review about your smartphone - this is extremely important. Firmware for ZTE Blade A5 will also appear on this page. Please note that this ZTE model requires an individual ROM file, so you should not try firmware files from other devices.

What custom firmware are there?

CM - CyanogenMod
LineageOS
Paranoid Android
OmniROM
Temasek's

AICP (Android Ice Cold Project)
RR (Resurrection Remix)
MK(MoKee)
FlymeOS
Bliss
crDroid
Illusion ROMS
Pacman ROM

Problems and shortcomings of a ZTE smartphone and how to fix them?

If the Blade A5 does not turn on, for example, you see white screen, hangs on the screensaver or the notification indicator only blinks (possibly after charging).
If stuck during update / stuck when turned on (needs flashing, 100%)
Doesn't charge (usually hardware problems)
Does not see the SIM card (SIM card)
The camera does not work (mostly hardware problems)
The sensor does not work (depends on the situation)

For all these problems, contact (you just need to create a topic), specialists will help for free.

Hard Reset for ZTE Blade A5

Instructions on how to do it Hard Reset on ZTE Blade A5 (factory reset). We recommend that you familiarize yourself with the visual guide called on Android. .

Reset codes (open the dialer and enter them).

*2767*3855#
*#*#7780#*#*
*#*#7378423#*#*

Hard Reset via Recovery

Turn off your device -> go to Recovery
"wipe data/factory reset"
“yes - delete all user data” -> “Reboot System”

How to log into Recovery?

hold down Vol(-) [volume down], or Vol(+) [volume up] and the Power button
A menu with the Android logo will appear. That's it, you are in Recovery!

Reset settings on ZTE Blade A5 You can do it in a very simple way:

Settings->Backup and reset
Reset settings (at the very bottom)

How to reset a pattern key

How to reset your pattern key if you forgot it and now you can’t unlock your ZTE smartphone. On the Blade A5 model, you can remove the key or PIN in several ways. You can also remove the lock by resetting the settings; the lock code will be deleted and disabled.

Reset graph. blocking -
Password reset -

How to update the software?

We provide you different ways software updates, namely: updating using a memory card or updating over the air.

To update over the air, you need to connect to a Wi-Fi wireless network or GSM Internet connection and check for updates in the settings.

What should I do if the operating time of the device does not coincide with the operating time declared by the manufacturer?

A smartphone is a complex electronic device that includes the functions of a pocket computer and cell phone and consumes a large amount of energy to operate these functions. The main amount of energy is spent on the operation of the display module and the GSM transmitting and receiving path. The display brightness is automatically set to maximum in very bright environments (sunny day) or set by the user to manual mode. Maximum brightness consumes maximum energy. When GSM is operating and with stable and stable reception “at maximum”, the device consumes a minimum amount of energy to maintain communication. In case of unstable and weak signal network, the device requires more power to maintain communication. In the case of “Network Search” in an area where there is no network, the device consumes the maximum amount of energy, which is spent on searching for nearby base stations. To reduce your phone's energy consumption you need to:

1. Disable GPS if not required.

2. Disable mobile internet if it's not needed.

3. Disable or delete unnecessary unused applications, because they are in an active state and consume the internal resources of the device.

What should you do if your phone freezes, won’t turn on, or reboots?

The cause of rebooting or freezing in most cases is third-party software or programs.

1. Initially, we recommend that you restore the default factory settings (after saving the information you need). If the phone turns on, select the "factory reset" option from the device menu. If the device does not turn on, turn on the device in " Recovery mode" and select "wipe data/factory reset". The method of entering "Recovery mode" is described below in the paragraph "How to enter Recovery mode?".

2. If resetting to factory settings does not help, update the software. Methods for updating the software are described in the paragraph "How to update the software?".

3. If the software update does not help, contact your nearest Authorized Service Center ZTE.

How to backup data, notebook or "Back up"?

There are 3 ways to do a “Back Up”:

1. In the phone settings, in the "Backup and reset" submenu, check the box for recovery.

2. You can transfer necessary information to the computer using USB cable.

3. You can make a “Back Up” using a third-party program.

What should I do if I don’t remember the password or pattern to unlock the screen?

If you have forgotten the pattern or digital password to unlock the screen, you need to perform a reset to factory settings: 1. Turn on the device in “Recovery mode” and select “wipe data/factory reset”. 2. If the procedure is not completed, you must contact the ZTE Authorized Service Center.

How to use wireless networks (Wi-Fi, BT)?

1. In the device settings, turn on Wi-Fi. Click on the Wi-Fi icon and you will be taken to the Wi-Fi network management screen.

2. The device will automatically start searching for active Wi-Fi networks in the access zone from 5 to 50 meters to the access point (depending on the power of the access point).

3. Select the network you need and click on it. If wireless network is protected by a password, please enter it.

4. After connecting to the desired network The Wi-Fi icon will appear on the main screen of the device.

How to enable Internet distribution on your phone (USB modem or WiFi router)?

There are two ways to enable Internet sharing on your phone. The first way is to enable distribution as a USB modem, the other is to enable distribution as a WiFi router. Make sure that your device has access to the Internet in order to distribute it:

1. USB modem - this method is used to distribute the Internet to a computer. Connect your phone to your computer using a USB cable and allow data access. "Settings->Wireless networks->More" Modem mode - check the USB modem box." Then the phone will start distributing the Internet to the computer. To stop the distribution, uncheck the USB modem or simply disconnect the cable connection.

2. WiFi router - make sure you have a stable Internet connection via mobile network or USB. "Settings->Wireless networks->More" Modem mode - check the "WiFI access point" box. To secure your wireless connection, tap the access point icon, then tap WiFi access". IN this menu you can set a name and password for your wireless WiFi connection. Your phone will start working as a WiFi router. To stop distribution, uncheck "WiFi router"

How can I quickly see the charging status?

During charging, press the power button. The battery charge status will be shown on the main screen of the phone.

Why is the amount of free memory on the device less than stated by the manufacturer?

Unlike the processor, which has its own built-in memory, other devices such as the video processor, audio processor and other devices included in element base The central board of the device consumes user memory resources. A certain amount of memory is reserved in advance for internal needs, but in case of overflow, user memory is used.

What types of device locking can be used?

There are 3 types of screen lock. Select one of the lock types in Settings -> Security -> Screen lock.

1. Blocking graphic key

2.PIN code lock 3.Password lock

What is the operating temperature of ZTE phones?

Operating temperature is in the range from (-10C) to (+50C).

What does ROOT mean?

ROOT is "administrator rights". ROOT makes it possible to change system files, change the system, install test programs and perform other actions. ROOT rights are hidden from users, but can be activated if necessary.
Be careful, careless handling ROOT rights may harm your operating system.

How to enter Recovery mode?

In the off state, simultaneously hold down the volume button (increase +) and the power button.

What should I do if the battery is not charging 100%?

The device's battery is designed in such a way that it dissipates part of the received charge and can subsequently be recharged. This feature designed to protect the battery and increase its performance. If the battery does not charge more than 80%, contact a ZTE Authorized Service Center.

How can I add Google account into the device?

1. When you turn on the smartphone for the first time, you will be prompted to register new Google account or use an existing one. But this is not a mandatory procedure.
2. To add an account at any time, you can register a new one or use an existing account: Settings->Accounts and “add account”.

How to enable USB debugging? How to get access to the "For Developers" menu?

Enter "Settings->About phone->Tap on "Build number" several times. Then you will have access to the "For Developers" submenu. In this submenu, "USB debugging" and other functions for developers are available

How to connect your phone to PC?

To install the driver (automatically), do the following:
1. Connect your phone to your computer.
2. When connected, select " Virtual disk" or "Virtual CD" depending on the model.
3. The computer must determine additional disk, run "Autorun.exe" on it and install the driver
4. If the drivers are not installed, go to "Settings->For Developers" and enable the "Disk driver". (click on "Build version" 10 times
5. When turned on ( USB Debugging) the driver will also be installed automatically.

What do the letters E, G, H mean?

When the phone's data transmission is active, the following symbols appear on the status panel (indicating signal reception, battery capacity, etc.):
- E means EDGE protocol is active
- G means active operation of the GPRS protocol
- H means active operation of the HSDPA protocol, which is part of WCDMA

Are you looking for a way to make your ZTE faster? Do you want to clear all data on ZTE before selling it to someone else? What you need is a ZTE factory reset. What is this? A factory reset (hard reset) is an operation that erases all data (including settings, apps, calendars, pictures, etc.) on your ZTE Blade and returns to default settings that make your device look like it came straight from manufacturer. When do you need to perform such an operation? When you need your ZTE to work faster when there are some difficulties in operation operating system. Here's how to reset ZTE.

Soft factory reset and hard factory reset are two methods you can use to factory reset your ZTE and get your phone back to normal so it will be like new. Perhaps you want to reset your phone's security because you forgot your screen lock password. Or you want to restore factory settings by hard reset your phone. Before rebooting your Zmax 2, I suggest you try a ZTE soft reset first. Wallpaper for Android.

Easy way to soft reset ZTE Zmax 2. Follow these steps:

1. Click ZTE main menu.

2. Tap Settings > Privacy.

3. Tap Factory Data Reset.

4. Tap Reset phone. Check, remove the SD card if you want to remove the memory card.

5. Click Erase Everything.

Wait for a few seconds, your phone will automatically restart and ZTE reset will be completed. If you see that your problem is still not fixed, you can try performing a hard reset ZTE phone A.

We do a hard reset of ZTE settings to factory settings

1. Please turn off ZTE.

2. Remove the battery from the phone and wait a few seconds. Then return it.

3. Press the Volume Up and Power button at the same time until it vibrates, then release the Power button, the ZTE recovery screen will appear there.

4. A couple of options will appear on the screen, select “Wipe data/Factory reset” using the Volume key and confirm the selection with the Power button.

5. Then on the next screen select – delete all user data using the Volume button, press the Power button to confirm.

6. All ZTE data and cache will be erased automatically and a system reboot, factory reset screen will appear.

8. Your phone will turn off and restart.

ZTE hard reset completed. So wait a few minutes. And then you will see that your smartphone works better than before.

All music, videos, files and folders will be deleted automatically.
Your entire contact list and history of calls or SMS-MMS chats will be automatically formatted from your smartphone.
This means that all information will be deleted from your phones that you have saved in your phone before.
So I suggest you, before you reset your ZTE phone Zmax 2, please create backups your phones like music, videos, files and folders, contact list and other important things.

If you have any questions about hard reset ZTE or any tips or tricks to improve Smartphone mainly ZTE smartphones, please feel free to share with us; We will publish an article about you. If you have any questions about these hard reset tips, please feel free to comment below. Of course you are important to us.

Are you looking for a way to make your ZTE faster? Do you want to clear all data on ZTE before selling it to someone else? What you need is a ZTE factory reset. What is this? A factory reset (hard reset) is an operation that erases all data (including settings, apps, calendars, pictures, etc.) on your ZTE Blade and returns to default settings that make your device look like it came straight from manufacturer. When do you need to perform such an operation? When you need your ZTE to run faster when there are some difficulties in the operating system. Here's how to reset ZTE.

Soft factory reset and hard factory reset are two methods you can use to factory reset your ZTE and get your phone back to normal so it will be like new. Perhaps you want to reset your phone's security because you forgot your screen lock password. Or you want to factory reset your ZTE by hard reset your phone. Before rebooting your Zmax 2, I suggest you try a ZTE soft reset first. Wallpapers for ZTE phone free download for Android.