Fair, not overpriced and not underestimated. There should be prices on the Service website. Necessarily! without asterisks, clear and detailed, where technically possible - as accurate and concise as possible.
If spare parts are available, up to 85% of complex repairs can be completed in 1-2 days. Modular repairs require much less time. The website shows the approximate duration of any repair.
Warranty and responsibility
A guarantee must be given for any repairs. Everything is described on the website and in the documents. The guarantee is self-confidence and respect for you. A 3-6 month warranty is good and sufficient. It is needed to check quality and hidden defects that cannot be detected immediately. You see honest and realistic terms (not 3 years), you can be sure that they will help you.
Half the battle is Apple repair- this is the quality and reliability of spare parts, so a good service works with suppliers directly, there are always several reliable channels and your own warehouse with proven spare parts for current models, so that you do not have to waste extra time.
Free diagnostics
This is very important and has already become a rule of good manners for the service center. Diagnostics is the most difficult and important part of the repair, but you don't have to pay a penny for it, even if you don't repair the device based on its results.
Service repairs and delivery
Good service values your time, so he offers free shipping. And for the same reason, repairs are carried out only in the workshop of a service center: they can be done correctly and according to technology only in a prepared place.
Convenient schedule
If the Service works for you, and not for itself, then it is always open! absolutely. The schedule should be convenient to fit in before and after work. Good service works on weekends and holidays. We are waiting for you and working on your devices every day: 9:00 - 21:00
The reputation of professionals consists of several points
Company age and experience
Reliable and experienced service has been known for a long time.
If a company has been on the market for many years and has managed to establish itself as an expert, people turn to it, write about it, and recommend it. We know what we are talking about, since 98% of incoming devices in the service center are restored.
They trust us and convey complex cases other service centers.
How many masters in areas
If there are always several engineers waiting for you for each type of equipment, you can be sure:
1. there will be no queue (or it will be minimal) - your device will be taken care of right away.
2. you give your Macbook for repair to an expert in the field of Mac repairs. He knows all the secrets of these devices
Technical literacy
If you ask a question, a specialist should answer it as accurately as possible.
So that you can imagine what exactly you need.
They will try to solve the problem. In most cases, from the description you can understand what happened and how to fix the problem.
Are you planning to try to restore correct functionality yourself? Do you think that you have a sufficient level of knowledge and experience, or are you relying on instructions downloaded from the Internet? We do not recommend engaging in this type of work. They often lead to disastrous results and here's why:
- Lack of practice, and with it the required base. It is enough to pry the case in the wrong place to remove it and everything will go awry. Replacing the battery on an iPad 3 is a complex, non-trivial task, entrust it to experts who are used to doing this kind of thing every day;
- Need for expensive equipment. It will be much cheaper to get to our nearest service center and pay for a full repair than to purchase everything you need;
- Good quality components are not easy to find. There is a high probability of stumbling upon a low-quality fake, spending cash in vain and still cannot return the tablet to “life”.
Don't waste your time on pampering of this nature.
What do we offer?
Concerned about the quality of the parts used in your workshop? Did you have a sad experience when, after a few days or weeks, you had to turn to another service for the same work? Of course, this happens everywhere. There are plenty of service centers that provide terrible repairs, promising a different result. In many places the staff is literally “green”, having just arrived and with no experience behind them.
We order consumables, AAA-class components directly from manufacturers. They have exactly the same technical characteristics, like those that are installed when making your pets. You will save on this because you do not have to overpay for distribution activities. This way, not only will the cost of replacing your iPad 3 battery be reduced, but the subsequent performance will be top-notch.
Call the phone number listed on the website to call an employee to the desired location or come in person. We will do everything in the best possible way!
It happens that iPad owners 2 are facing a problem fast discharge batteries. There can be many reasons, as well as solutions, but we will consider the most radical solution to this problem - its replacement.
A new battery can be purchased on similar sites. You can also try ordering it from service centers that carry out repairs. Apple technology, but in this case the delivery time can be very long.
Attention: All actions that you carry out according to this manual may, if used carelessly, damage your iPad 2. If you are not confident in your abilities, please contact a service.
In order to disassemble iPad tablet you will need:
— Hair dryer, to soften the plastic and weaken the effect of the glue.
— A plastic tool for separating the front panel (available at phone parts stores).
— Plastic mediators, for the convenience of separating the panel (you can use everything that is at hand and has similar qualities).
— Special small-sized screwdrivers (can be ordered on the Internet, or use sets for mobile phones).
Let's get started:
At the initial stage, you will need to separate the front panel of the device; to do this, use a hairdryer to heat the area to the right (the home button at the bottom) of the home button for convenient separation. Be careful when directing the hot air stream, the button may be damaged if it gets too hot.
Step 1 
Step 2 
Step 3 
Step 4 
Step 5 
Step 6 
Step 7 
Step 8
After separating the front panel, you need to unscrew the 4 screws securing the device screen. For this you will need a small Phillips screwdriver, preferably with a magnetic tip. Also, it is better to think in advance where you will put the screws so as not to lose them.
Step 9 
Step 10 
Step 11 
Step 12 
Step 13 
Step 14 
Step 15 
Step 16 
Step 17 
Step 18 
Step 19 
Step 20
Then we need to unscrew a few more fasteners, we do everything as in the photo. 
Step 21 
Step 22 
Step 23 
Step 24 
Step 25
To remove the battery, it is better to heat the back of the iPad with a hairdryer, and you can proceed to disconnect.
Step 26 
Step 27 
Step 28 
Step 29
Step 30
After installing a new battery, reassemble the tablet in the reverse order. To tighten the screws more conveniently, we recommend slightly twisting them against the thread to get into it.
If you have any difficulties or additional questions, please comment, let's try to figure it out together.
At the Mac Pro service center you can use the battery replacement service iPad Mini 2 Retina. Our specialists will help you install a new power source instead of a worn-out battery, and will also determine the reasons that caused its premature wear.
When to change the iPad Mini 2 battery
As soon as the device begins to discharge quickly and loses charge almost every minute, you need to urgently contact qualified technicians. If this procedure is not performed in a timely manner, other manifestations of problems with the battery may occur:
- Spots on the screen. The defect is noticeable when the display is turned off. It occurs due to the fact that a worn-out battery swells and begins to put pressure on the screen from the inside.
- The tablet does not charge to 100%. Even when connected for a long time charger, the indicator never fills completely - it only reaches a certain point, which varies periodically. But in this case, the solution to the problem can be not only replacing the battery, but also buying a new charger.
- The device turns off unexpectedly. Despite the fact that the charge has not dropped below 30-40%, the tablet turns off. When you try to turn it on, a message appears stating that the battery is completely discharged.
- Operating time is less than 10 hours. Even with active using an iPad Mini 2 Retina, it must work for at least 8-9 hours - otherwise, this is a clear signal about the need to replace the outdated battery.
If such “symptoms” appear, you should never try to restore the tablet yourself. This can only significantly worsen the situation by damaging one of the cables or connectors - such savings are impractical, and therefore it is important to initially turn to professionals.
iPad Mini 2 battery replacement cost
Standard prices for all groups of services are presented on the website - you can familiarize yourself with them in the appropriate section. But the final cost will be announced only after a comprehensive diagnosis. In some cases, you can do without replacing the battery if fast discharge device is caused by other reasons. Diagnostics will take only 10-15 minutes, after which you will receive accurate information about the price and timing of repairs.
You can come to service center Mac Pro on any convenient day - we also work on weekends so that every client can receive professional technical assistance in a timely manner.
Apple devices are quite reliable in operation and rarely fail before the established deadlines, with the exception of manufacturing defects or mechanical damage as a result of careless handling. Regarding battery, then a certain period of production is set for it, after which it reduces its productivity and does not hold a charge for the time specified in the instructions. In this case, you should replace the battery with a new one of the same model.
In this article we will look at how to carry out self-replacement iPad battery 2. After reading this information, you can decide whether it’s worth starting to disassemble the tablet and whether you can afford a replacement iPad batteries 2. Recently, cases of self-repair of equipment by non-professionals have become more frequent, resulting in damage to motherboards and parts are lost, mini devices fail. Therefore, soberly assess your capabilities, since the iPad will have to be disassembled to the ground, in detail, unscrewing all the screws and removing the rather fragile mini cables, antennas due to the fact that the battery is located on back cover device
It happens that the battery goes out of working condition before the established warranty period. What is the reason. Basically, the reason is not a defective battery, but the following.
It is possible that the tablet was often subject to frequent power surges when charging.
Very often there are cases when the iPad 2 is used at different temperature changes: first it is used in a warm car, and then immediately in the cold outside, and therefore the battery cannot withstand such changes and goes out ahead of time.
Perhaps, due to careless handling, the tablet often fell, and the battery cable was poorly connected, as a result of which the charge was weak and the battery was not used to its full capacity.
Preparing to replace the battery on iPad 2
To begin disassembling the tablet and replacing the battery, you need to prepare tools and mini devices. You will need a plastic pick, tweezers, a metal or plastic spatula, a hair dryer, special glue, a set of special mini-screwdrivers, containers for different types bolts, rubber gloves, and the battery itself.
Disassembling the case on iPad 2
First, you need to detach the front panel on the iPad, so at the bottom near the “Home” button, warm up the surface of the display with a hairdryer, without heating it too much, so that the glue connecting both panels melts a little.
Using a plastic pick, slide it between the right edge of the display and rear panel, bending it back. Using a metal spatula, insert the second pick into the slot and, gradually moving it along the slot of the case, step by step separate the front panel of the iPad towards the “Home” button, first at the bottom right, and then at the left.
When separating the panel from above, do it carefully and without haste, since the cables are located near the edge of the back cover. Carefully separate the display from below, without lifting sharply, in order to carefully remove the emerging wire, and behind it, disconnect the three cables in turn. Then separate the display itself and remove the remaining wire.
Lifting the next cable, unscrew the bolt underneath it with a mini screwdriver to unfasten the lower communication board. Gradually bending the screen, free the antenna socket from the GPS connection in order to unscrew the connecting cable with a special screwdriver and remove the next cable.
Now you can remove the SIM board and unfasten the cable again by unscrewing the screws. Remove the fee. Next, unscrew one by one the three bolts on top and two on the bottom from the antenna protection cover for Bluetooth and WI-FI. Remove the two cables attached to them.
How to replace the battery
Since the iPad 2 battery is glued to the back cover of the tablet, you need to disconnect it gradually. First, use a spatula to slowly pry one edge from the bottom, and use the other spatula to pry the other edges around the perimeter, step by step, separating the sides. When large gaps form, continue to separate the battery with your hands.
