Restoration windows systems 10 From the recovery point (TV) is convenient when the user installs many programs downloaded from the Internet. Often comes across poor-quality software, outdated or with a virus. Also the procedure may be needed if there was an attempt to connect additional device And there was a conflict with the system.
TV is a service that keeps the backup version of system files and registry in the state at the time of creation of such milestones. It is recommended to create them before each change that is entered in operating system.
Also, failure can occur at the freelancer:
- disconnection of electricity;
- sharp voltage drop in the network;
- infection with viruses, etc.
In this case, you need to have a mechanism that will help return to the working operating system without reinstalling it. How to enable is described here.
The basis of this method is the mechanism of shadow copying built into the "top ten". It allows you to restore the initial state of any important files.
How to run rollback
Tell in detail how to roll back Windows 10 to the recovery point. This can be done in different ways:
- Press the Win + R buttons and type the string. "SystemPropertiesProtection".
The properties window opens. Pressing the "Restore" button will start the process.
Through the search, locate the control panel and run it.
In minor icons mode, press the corresponding link.
You can get into this window and through the search.
Click "Run" to start the process.
Here you can configure the parameters.
To start rollback to the recovery point in Windows 10, click the Restore button.
Want to know what is and how to enable it, go to the specified link.
How the rollback is performed
In the first step you will be asked to confirm the beginning of the operation. This is done in order not to start the procedure by random pressing. Although it is possible to cancel the changes in the future, but the process itself will not be interrupted.
To see what actions will be canceled, tap "Search for affected programs".
The OS will be scanned to find all affected steps.
You will see which programs have been restored or removed before creating milestones. After rollback, they will return to its original state. Please note that there are no programs that have been installed from the Tens of Store.
If everything suits, close this window and click "Next". You will need to confirm the beginning, as you will run the Windows 10 recovery point by randomly the system does not give.
Agree with action.
Confirm again.
The preparation process will begin.
Then the computer will reboot, and you will only wait. With minimal changes, the process took half an hour.
Return to point recovery WINDOVS 10 completed.
Restart the computer. As a result, we get a new name.
After that, again, roll back the Windows 10 system to the recovery checkpoint.
Check if the WindowsApps folder has been created and delete WindowsApps.old. As a rule, if the Windows 10 restore point does not work, this method helps.
You can run the restoration of Windows 10 system from the recovery point when loading. In this case, you should get into the menu of specific download parameters. If the operating system is not loaded at all, then this is done with boot disk. If you do not have it, you need to create such a computer with a "dozen" on another computer. If OS booted, the TV does not work, go to "Parameters".
Then select "Update and Security".
And reboot.
A menu appears in which you select "Diagnostics" and then the first item (using TV).
This will help roll back and. Once again we remind you about important information:
- TV disappear when removing protection from the system.
- It is necessary to create a milestone before installing the dubious software or at the time when the OS is in the working condition that suits you.
The final click will launch the procedure windows rollback 10. After a successful completion, the system will start in normal mode.
Some important momentsrelating to the restoration of this method:
- Stop the process running through the console in safe mode is not possible;
- It is impossible to cancel the changes that have entered into force;
- After the end of rollback on the desktop will appear text Documentin which all affected (deleted) files will be described. The names are represented as links by clicking on which you can quickly restore lost data.
If the black screen or eternal preparations for automatic restoration of the system do not allow you to enter safe mode Computer, then go to roll back, using the BIOS tool.
Restoring Windows 10 via BIOS
Immediately it is necessary to make a reservation that this method is possible to implement only if the user has a disk or flash drive with the distribution room of the license operating system, otherwise the option can be skipped.
First, you must configure the BIOS to read the disc when the computer is started. For this:
BIOS is configured. Now it is enough to insert external devicewhere the distribution is stored.
Useful tips when working with the environment:
- You can find the right key to enter the BIOS in the instructions for your computer or on the manufacturer's website. On most modern models PC uses the Delete button;
- On laptops To enter the BIOS, the Ctrl + Alt + Esc key combination can be used;
- In addition to the standard boot, section 1st boot device can be in "Boot Device" or "Boot Device Configuration".
Now directly restoring Windows 10. After the external device was inserted, and the computer is running, a window will appear in which instead of "set" the clique in the left bottom of the System Restore Screen:
A window selection window appears in which you want to select the Diagnostic section:
It is worth noting the means as "boot recovery". This feature initiates the launch of the computer scan for errors and during the detection corrects them. You can try to start the utility, but it is not worth it. In most cases, after a short search, a message will be issued that the computer cannot be restored.
If you failed to run BIOS
Situations when when the preparation process hangs automatic update It is impossible to go to the BIOS, it is often found. Many users are incomprehensible to do in a similar situation, but the solution is - reset (zeroing) of the BIOS environment.
There are three relatively simple and safe way Zero:
After using any way, the user will be able to enter the BIOS and configure it to recover Windows 10.
Hard disk problems
An error in which Windows 10 is loaded incorrectly, may be associated with failures or critical errors On hard disk. Decide this without buying or repairing "hard" is impossible, but to calculate the presence of problems without complete windows startup 10 still possible.
In the right corner you can see the values, like 5ms, 20ms, etc. They represent a period of access to each silver hard disk. Ideal will be the value of 5ms and the more such sector, the better.
Let's try to recover Windows 10 and deal with many options in ascending order of their complexity. Actually, they have a lot of common: in all cases without exception, except full recovery Windows 10, we will need a backup.
To begin with, the most important files and documents, and ideally the entire system disk ... To ensure reliability of the system, it is necessary to protect the most important disk - the first, system, as well as our user information, that is, documents. You can do this in several ways:
- Returning a computer in source
- Using file history
- Using recovery points
- From the image of the system
- C drive
How to restore Windows 10 to the original state
First of all, you need to pay attention when we want to restore Windows 10 to the original state, it is the "Restore" function. To do this, open Settings \u003e\u003e Update and Security \u003e\u003e Recovery and click "Start".
Here are two options for action. Return the computer to its original state. "Reset" with the removal of all installed programs, With the maintenance of personal files or without it. To the last medium it is worth resorting in emergency cases ... and in the presence of a backup of all valuable information.
The last item of this menu offers a clean Windows installation using new program Refresh is the same reset, only followed reinstalling Windows 10 With automatically downloaded from the "Distribution" network. In this way, we will use only in cases where the usual "reset" will be impossible.
In both cases, pre-take care of backing up your documents and photos - if they are, of course, are not stored in the "cloud", and not on a separate disk. Remember: the system reset affects only the main one system DiskAll other drives in your system remain safe.
Disk recovery
If the computer refused to run, then we will come to the aid installation disk Or the recovery disk that we have created earlier (read: how to create a Windows 10 recovery disk). To start with removable media, you must perform some settings. Using Boot Menu to download USB Flash. Disk, only then we will have booting from the disk.
After hitting the recovery environment, multiple tasks will open before you, even rollback to the initial state, if other methods do not help.
Recovery modeWindows 10.
Point of recovery
Creating "Recovery Points", that is, backup copies of configuration files and important system files. Places they occupy a little, but will allow you to reanimate the system in the overwhelming majority. Windows periodically (usually at the time of installing new programs) creates instant "snapshots" of the system status. And if at your disposal there are several such "points", you can return the system "Back to the past". And not until the birth of life on your computer, and only for a day, others, until the appearance of the "glitch".
To do this, we need to go to the old menu for restoring the control panel system (section System and Security) - you already know what the easiest way to get to it by typing the word "recovery" in the search bar.
Click on the "Starting System Recovery" line - the "Calendar" will open before all the recovery points will be listed. And at the same time - both programs, before installing which they were created. And if you know exactly what your system "instructed" the video card driver is just enough to find its name in the list, and roll back to the date preceding it.
One subtlety: By default, the recovery point system in Windows 10 is disabled. And if you are going to use it, then when you first start a computer with a "fresh" system, it must be enabled and configured. This is done in the System Recovery Setup menu: Please note that for each disk on your computer it turns on separately (if you are somewhat on your computer, I recommend that you limit only by system). In addition, you can customize the volume disk spaceThe storage of "points" - the more you select the places, the more the "points" can save the system.
Windows 10 Recovery Procedure Removed: In case of failure, you can easily return the system to the previous state.
Using file history
Documents and photos Better from the very beginning to store in the "cloud", that is, not in the folders on the desktop, as we used, and in the Dropbox or ONEDRIVE storage (if you are more convenient, create for these folders "Labor" on the desktop) . See how to use cloud storage.
If you do not trust the network, store them in special documents folders, and turn on Backup Onedrive in system settings, and if there is a separate drive (for example, external USB hard drive), use backup using File history history.
Unfortunately, this method protects only your information, but not system files, Restore Windows 10 after failure it will not help.
System recovery is important function Windows, as it allows you to return the working state of certain elements. strongly worried about active users opportunities, because then backup copy It becomes useless, and it is necessary to have a founded hope.
System restoration does not work: reasons
If the system recovery does not work, most likely the reason is at one of the steps of the procedure. Often, the recovery points themselves are often unsuitable if they are damaged due to viral exposure or incorrect user manipulations.
It is also likely that the function itself has some failures, they should be corrected, periodically the problem is observed during Windows updates, with time the situation is solved by the manufacturer.
The Windows system restore does not work due to the lack of system integrity, if it contains incorrect registry settings, broken keys, files are damaged or conflicted.
The Windows 10 Recovery Error has gained great distribution lately, so Microsoft laid out the fix of this situation. Immediately, we note that this action is somewhat difficult, since it is very long, it is necessary to clearly follow the instructions.
Usually this problem Accompanied by the E_Unexpected code (0x8000FFFF). So, you need to manually correct such components:
- You must download and install Windows AIK to the computer;
- Now you should create image of Windows. Re environments, the action is performed as follows:
- Find the installed item in the "All Programs" list;
- Win + R and enter CMD;
- You must duplicate the install.wim file, take it from the installation disk. You can perform the procedure using commands:
- mD C: \\ OS_Duplicate
- mD C: \\ OS_ Duplicate \\ Mount
- copy D: \\ Sources \\ Install.wim C: \\ OS_ Duplicate, here D - should be replaced by the letter of the media with the installation system.
- The imagex command should use the file, just created, to do the Console to insert ImageX / MOUNTRW C: \\ OS_ Duplicate \\ Install.wim 1 C: \\ OS_ Duplicate \\ Mount;
- The image of the Windows Re must be copied by taking it from the mounting image. The procedure is easy to produce:
- mD C: \\ Windowsre
- mD C: \\ Windowsre \\ Mount
- You can delete the generated image using the ImageX / Unmount C: \\ OS_ Duplicate \\ Mount command, but only after completing the procedure described earlier.
- Now the preparatory stage has ended and should be corrected wednesday Windows Re. Actions are the following:
- It follows an image formed before, start using the ImageX / MountrW C: \\ Windowsre \\ Winre.Wim 1 C: \\ Windowsre \\ Mount;
- Now the correction must be installed using
- DISM / Image: C: \\ Windowsre \\ Mount /DDD-package:C:'temp \\windows6.1-kb2709289-x64.msu
- The procedure must pass without complications, it can be done in a correct result using
- DISM / Image: C: \\ Windowsre \\ Mount / Get-Packages;
- Save changes due to ImageX.exe / Unmount / Commit C: \\ Windowsre \\ Mount.
- The final stage of the formation of medium medium is lies in:
- Needed new file.which will help create an image formed using
cmd amd64 c: \\ winrex64; - The winre.wim file must be duplicated along the ISO \\ Sources path and change its name on boot.wim. This is Copy C: \\ Windowsre \\ Winre.Wim C: \\ WinRex64 \\ ISO \\ Sources \\ Boot.wim;
- Mount the image to any virtual or physical disk.
- Needed new file.which will help create an image formed using
Error solving 0x800070091
Another kind of problem, which is likely to be eliminated in subsequent system updates. Especially often the error is provoked by the preliminary windows update. Often between the backup point and the current moment in the top ten, an update was produced, and his rollback causes a mistake. Fortunately, it is easy to eliminate a similar error.
To return a working status for a function, you just need to remove the WindowsApps folder, but it is protected by the system from change. So it is necessary to change the access rights to be changed, the easiest way to make this Takeown / F "C: \\ Program Files \\ WindowsApps" command / R / D Y is so a group of users with administrators can edit the folder and data in it. Sometimes the procedure takes a long time.
Now you should enable the display of system and hidden folders. This is done in the "folder parameters" section in the "View" tab.
Then you can manually go to the folder, is in Program Files and you need to remove it, first to rename it. Alas, but the folder contains the files used by the system, so you have to use Unlocker, select the Rename function and add any letter, digit to the folder.
System Check
It is necessary to run the tool that will check the system components. In Windows, this function is already built in, it is only necessary to use it through the console.
- Press WIN + R and CMD;
- Enter SFC / Scannow.
A comprehensive check of the integrity of system components will be carried out, including the recovery function. Often this option has a positive impact, but sometimes you have to manually restart the function. You must delete all previous points and create a new one, then try to roll back to it.
In the extreme case, you will have to reinstall or update the system if such a function is present. In some cases, the Microsoft Fix IT utility helps.
In laptops there is a built-in Recovery Manager, so you can roll back to the factory state.
Usually the above actions are well helped to restore proper work Functional and only in the extreme case will have to resort to rollback or reinstalling the system.
If you have any questions about "What should I do if an error occurs when restoring the Windows system?" You can ask them in the comments.
if (Function_exists ("The_ratings")) (The_ratings ();)?\u003e
The Windows 10 operating system is very easy to handle. Any user will be able to figure it out and even on their own to cope with those or other problems. Unfortunately, sometimes the errors becomes too much, and they cause damage to the system files or lead to other serious malfunctions. Fix them will help the Windows Recovery option will help.
Causes to use Windows Recovery
The main reason is the refusal of the operating system to be loaded. But this malfunction itself may arise due to different factors. Let's wonder the most common:
- damage to viruses - if the OS files are damaged by a viral attack, then the system can work with failures or not loaded at all. Therefore, it is necessary to restore these files for normal operation, since there is no problem to solve the problem;
- wrong installed update - If an error occurred during the update or part of the files was set incorrectly for another reason, then instead of a complete reinstallation of the broken operating system will also help its recovery;
- damage hard disk - The main thing is to find out what the problem is. If the disk has physical damage, it is not necessary to do without replacing it. If the snag is how it works with data or any OS download settings - recovery can help;
- other changes in the registry or system files - in general, almost any changes in the system can entail errors in its operation: from small to critical.
Restore directly from the Windows 10 system itself
It is possible to divide the methods for recovery to the system used before loading and on those that are used already when the system is loaded. Let's start with the situation when Windows is loaded correctly and you have the ability to use programs after it starts.
Using the recovery point to roll back the system
At first, you need to configure directly the system protection itself to make it possible to create and store recovery points. To do this, follow these steps:
Now you can go to the creation of the recovery point:
When the point is created, you need to figure it out how to return the system to the state at the time of its creation, that is, perform rollback to the recovery point:
Another way to access the recovery points is available in the diagnostic menu, which opens through the "Parameters" of Windows 10 (Win I). Works this menu is completely similar.
You can also use recovery points through additional system diagnostic parameters.
Resetting the operating system to factory settings
Another restoration method has appeared in Windows 10. Instead of a complete reinstallation, it is possible to simply reset the system to her initial state. Some programs will become non-working, as all registry entries will be updated. Save the necessary data and programs before reset. The process of returning the system itself to the initial form is as follows:
- Press the Win + I key combination to open OS parameters. There, select the "Update and Security" tab and go to the system recovery section.
IN windows parameters Open the "Update and Security" section
- Press the Start key to start recovery.
Press the "Start" key under the "Return the computer to the original state".
- A request for saving files will arise. If you click "Delete everything", hDD will be completely cleaned. Be careful when choosing.
- Regardless of the selection in the next window, the discharge information will appear, which will be executed. Examine it and if everything suits you, press the "Reset" key.
Explore reset information and click "Reset"
- Wait until the end of the process. It can take about an hour depending on the selected parameters. During the procedure, the computer will perform a restart several times.
Video: Tablet reset with Windows 10 to factory settings
Restoring the system data through the "File Story"
"File Story" - the ability to restore damaged or remote files during some time. It can be very useful if you need to return missing videos, music, photos or documents. As in the case of recovery points, you must properly configure this option before applying:
Thus, you can restore files, unless, of course, the disk was not subject to complete data cleaning. Now we will understand how to restore the lost file:
Video: Restoring Windows 10 on your own
Ways to restore without logging in
If the operating system is not loaded, it is more difficult to restore it. However, acting strictly according to the instructions, and here you can cope without problems.
Restore system via BIOS using a boot drive
With the help of the boot drive, you can start the system restore via BIOS, that is, before windows downloads 10. But at first, such a drive is required to create:
More from you is not required. Boot drive will be created, and you can proceed directly to the restoration of the system. First you need to open the BIOS. This is done by pressing different keys when the computer is turned on, which depend on the device model:
- Acer - most often the buttons for entering the BIOS in this company are the F2 or Delete keys. In older models used integer key combinations, for example, Ctrl + Alt + Escape;
- ASUS - almost always works F2, especially on laptops. DELETE is much less likely;
- Dell - also uses the F2 key on modern devices. On old models, it is better to simply look for instructions on the screen, as combinations can be the most different;
- HP - laptops and computers of this company are included in the BIOS by pressing Escape and F10. Older models did it on the keys F1, F2, F6, F11. On tablets, usually in the course of F10 or F12;
- Lenovo, Sony, Toshiba - like many other modern firms, use the F2 key. This has become practically the standard for the entry in the BIOS.
If you did not find your model and could not open the BIOS, carefully examine the inscriptions that appear when the device is turned on. One of them will indicate the desired button.
After you hit the BIOS, do the following:
- Find the First Boot Device item. Depending on the bIOS version It may be in different subsections. Choose your drive from OS as a device and restart the computer after saving changes.
Install the download the desired device As a priority
- Installation will begin. Check the language and, if everything is correct, click "Next".
Choose a language at the beginning of installation
- Go to "Restore System".
Click "Restore System"
- The recovery menu opens. Select the Diagnostics button.
Open the system diagnostics menu in this window.
- Go to Advanced Options.
Go to Advanced Diagnostic Menu Options
- If you have created a point to restore the system earlier, select " Windows restoration Using the recovery point. " Otherwise, go to "Recovery when loading".
Select "Recovery when downloading" in additional parameters to fix the operating system errors
- Automatic checking and fixing boot files. This process can take up to 30 minutes, after which Windows 10 must boot without any problems.
Creating a boot disk from the image
If you still need a boot disk to restore the system, not a flash drive, you can create it using the ISO image obtained earlier, or use the ready-made installation disk with the same version of the OS. Creating a boot disk is performed as follows:
If the recovery does not give the result, you can always simply reinstall the operating system using the same disk.
Restoring the system via the command line
An efficient tool for solving an OS load problem is the command line. You can also open it through the diagnostic menu, which was opened with the help of a boot drive:
Another way will require to determine the name of the section:
- In order to find out the desired value, enter DiskPart and List Disk commands. You will be presented with a list of all your disks.
- Determine disc It is possible by its volume. Enter the DISK 0 command (where 0 is the number of the desired disk).
Enter the specified command sequence in order to find your disk number
- When the disc is selected, use the Detail Disk command to obtain the necessary information. You will show all the disk sections.
- Find the area to which the operating system is installed and remember the letter.
Use the name of the section that you learned in the BCDBOOT X: \\ Windows command
In addition to these, there are a number of other commands that may be useful:
Just try entering these commands alternately: some of them will cope with your problem.
Video: Windows 10 boot restore via the command line
Fix recovery error
When you try to restore the system, an error may occur with code 0x80070091. Usually it is accompanied by information that recovery has not been completed. This problem occurs due to an error with the WindowsApps folder. Make the following:
Restoring Windows Activation Key
The OS activation key is usually written on the device itself. But if a special key sticker was worn out over time, it is possible to find out it from the system itself. To do this, the easiest way to use a special program:
If you need to find out the key before activating the system, then it is not necessary to do without contacting the place of purchase or in official support for Microsoft.
I exhibit the required screen resolution
Sometimes when restoring the operating system, the screen resolution can be selected. In this case, it should be returned:
Password recovery in Windows 10
If you have forgotten the password to enter the operating system, it should be restored. Request a reset of your account password on the official website:
It is worth being prepared for any problems with the computer. Knowledge about how to restore the system in case of malfunctions will help you save the data and continue working for the device without reinstalling Windows.
