Today, the MMS service, no longer something unusual and new, remains one of the most popular because it allows you to transfer files, including photographs and various images, with maximum convenience.
Many users specifically try to choose those cellular operators that provide packaged MMS messages. For example, MTS has packages for ten, twenty, or even fifty messages offered to customers, “MMS+” - a discounted service, and special tariff plans with unlimited MMS messages. There is even a free MMS show in the arsenal!
You have to set up MMS on Android for two reasons:
- Purchasing a new smartphone;
- If the settings have been reset to factory settings.
In any of these cases, you will have to change the configuration for the service to work. You can do this in 4 ways.
Automatic setup
Here, as the name suggests, our participation is minimal, and this is very good. The bad thing is that you can use this setting only once - when you first register the device in the network of the selected cellular operator. After this, everything should be already configured, and, as a rule, retrieving data is not required. The algorithm of our actions is as follows:
- Installing a SIM card;
- Turn on the device (if necessary, enter a PIN code). After registration is completed, the required values are searched in your operator’s database and the information is sent to your device.
- After receiving the configuration profile, accept it and save it. Automatic setup completed.
Operator assistance
This method, like manual entry, can be used an unlimited number of times. But! As you understand, it will not be possible to sit straight on the fifth point, since you will have to perform certain manipulations.
Each operator mobile communications has a consultation number (the service is free):
- Beeline – 0611;
- MTS – 0890;
- Megafon – 0550;
- Tele 2 – 611 (or 679);
- Motive – 111.
Next, following the instructions of the automatic informant, we establish a connection with the operator, and order the necessary settings, accept them, and save them. Then we reboot the device. Sometimes the service needs to be activated, then we call again and ask the operator to enable the service on this number. On this, MMS setup will be completed.
Setting up MMS on Android on your own
What to do if you can’t get through to the operator? In this case, you will have to act independently and set the settings manually.
Step by step it looks like this:
- Go to the applications menu;
- Select the “settings” item;
- In the menu that opens, go to “network” (on some devices “more”);
- Select “mobile networks”;
- Go to “access points”, check the “mobile data” box;
- We go to the “Internet access points” section, click “ new point access";
We perform the following actions in accordance with those indicated in the table:
| Beeline | Megaphone | MTS | Tele 2 | Motive | |
| Name | Any | megafon | Any | Tele2 mms | Motiv MMS |
| Access point (APN) | mms.beeline.ru | Depends on tariff plan | mms.mts.ru | mms.Tele2.ru | Not specified |
| Username (login) | beeline | empty | mts | empty | motiv |
| Password | beeline | empty | mts | empty | motiv |
| MMSC | http://mms/ | http://mms:8002 | http://mmsc | http://mms.ycc.ru | |
| Proxy MMS (IP address) | 192.168.094.023 | 10.10.10.10 | 192.168.192.192 | 193.12.40.65 | 172.16.2.10 |
| MMS port | 8080 | 8080 | 8080 (on some models 9201) | 8080 (9201 for WAP1 version) | 8080 |
| Access Point Type (APN Type) | mms | mms | mms | mms | mms |
We leave everything else as is. Please note that some devices have a “save” function. After installation, reboot the device.
We order settings on the website of the operator of a specific region
To use this option, we change our phone to a computer, connect to the Internet, and use a search engine to find the page of our operator. Choose the desired model smartphone, enter your mobile number and captcha. Click “send”. Within a few minutes we receive the information, save it, and install the necessary profiles. Upon completion of the process, we completely reboot our device.
If it still doesn’t work, then you need to look for an error, as a rule, in your actions.
In our material, which you read carefully, we talked about all the possible ways to configure MMS on Android for different operators. Obviously, there is nothing overly complicated about coping with the described process yourself. Follow the instructions in the instructions and enjoy the capabilities of the popular MMS Messenger. Good luck!
At the current level information technology sending multimedia messages between subscribers, it would seem, has already outlived its popularity. However, in the absence of access to wireless internet, this method of information exchange becomes the only alternative. That is why it is important for any user to know what to do if the question arises: “I can’t send MMS from Android” and how to solve it.
Problems with sending or receiving messages are not always associated with a technical malfunction of the phone. This possibility should not be completely excluded, but first it is better to perform a preliminary diagnosis and network settings. Please note that for a new SIM card, settings come automatically the first time you use it in a smartphone. If your SIM card has been working for many years, this function may be lost for it. It is also worth taking into account other possible causes of failures.
Why doesn't this function work:
- This service is not available for some regions. To clarify the information, it is better to contact your cellular representative directly.
- You also need to request automatic settings from the operator. To do this, it is important to provide the exact model of your phone. After receiving the data in a separate message, you should activate the service according to the attached prompts. If your smartphone allows for the use of two SIM cards, the setup is carried out separately for each number.
- Your recipient may have a different tariff plan, not supporting this function, or using other network parameters.
Often automatic updates cannot be used or they do not work correctly. For such cases, it is advisable to configure the communication parameters yourself. This algorithm provides some differences for different operators.
Solution to this problem
If you cannot use the ability to automatically configure network parameters, you must enter everything yourself. To do this, it is important to adhere to the given algorithm of actions, focusing on your phone model and the selected connection.
Steps for manually entering network parameters:
- In the menu section of your smartphone you need to find “Settings”.
- In this list find the category " Wireless networks" Communication parameters are indicated here, including data transfer and wireless Internet use.
- It is necessary to activate the “data transfer” item if it is not active.
- Return to the "Wireless Networks" menu and find the access point. Typically, the phone will provide two connection options, one of which will be responsible for the mobile Internet, and the second - directly for the ability to send multimedia files.
- For a phone with two SIM cards, you must also indicate the number to which the service will be connected.
If you are unable to configure it yourself, you can contact your operator at the specified number or visit service center(representation) in person. For a communications center specialist, such procedures will take a minimum of time and present no difficulties.
Not sent from Tele2
If MMS messages are not sent from Android to Tele 2 subscribers, you need to check the correctness of the information provided. It is also worth asking your subscriber in advance about setting up a similar function on his device.
How to set up message transmission:
- Call number “679” and act according to the instructions received.
- Register in your “Personal Account” on the resource, and then familiarize yourself with the settings section by activating the service.
If the manipulations are ineffective, you should use manual entry. You will need to enter the specified information in the appropriate sections.
Template to fill out:
- You can come up with a name yourself.
- APN - mms.teleru.
- MMSC - http://mms.tele2.ru.
- Proxy - 193.12.40.65.
- Port - 8080 (9201).
After entering the information, you need to restart the device and also check the function of sending and receiving messages.
Difficulties in sending messages for MTS
MTS subscribers use this service after activating the function in several ways.
Execution algorithm:
- Send an empty SMS field to the short number “1234”. After this, the network parameters will also be sent via SMS notification.
- If you can access the Internet via a PC, it is better to create your account on the website of a company that provides such communication opportunities. This will allow you to find out the latest news and connection promotions, monitor your expenses or order a tariff change. You can also order service connection in the “Internet Assistant MTS” section. Address of the site of interest: https://ihelper.mts.ru/selfcare/.
- For direct communication and clarification of details of interest, you can also use the service feedback on the website, or you can call “0876” and receive verbal instructions for such cases.
If it is not possible to use the options described above, it would be more advisable to enter the information yourself in the specified section.
When entering manually, use:
- APN - mms.mts.ru.
- Login (username) - mts.
- Password - mts.
- MMSC - http://mmsc.
- Proxy - 192.168.192.192.
- Port - 8080 (9201).
- Access point type (APN) - mms.
After completing all sections, be sure to restart your smartphone so that the changes made are saved and updated. After that, check the sending function: send any multimedia file to the nearest device of a friend or relative. If it is impossible to perform or if a failure appears on the screen, repeat the specified steps or check that they were performed correctly.
Can't send MMS from Megafon
Megafon subscribers also have access to services for sending and receiving multimedia files. They are also used for this different ways connection, and in the appropriate sections of the menu indicate the information below.
When entered manually, indicate:
- Name - come up with any suitable name.
- APN - mms.
- Login - leave blank.
- Password - leave blank.
- MMSC - http://mmsc:8002.
- Proxy - 10.10.10.
- Port - 8080.
- Access point type (APN) - mms.
Register your account on the official website: http://moscow.megafon.ru/help/settings/. If it is preferable to receive information via SMS, you must send a message to the number “5049”, and interaction with the operator is carried out using direct number"05002".
It is impossible to send or receive messages on the Beeline network
The no less popular operator Beeline also took care of opportunities for its customers. There is an official website for this with the ability personal registration and obtaining information of interest about new tariffs and services of the company. It is located at: https://uslugi.beeline.ru/. Manually entered parameters will also change slightly.
When manually entering data, the following parameters are used:
- Name - come up with any suitable name.
- APN - mms.beeline.ru.
- Login - beeline.
- Password - beeline.
- MMSC - http://mms/.
- Proxy - 192.168.94.23.
- Port - 8080.
- Point type (APN) - mms.
Communication with the operator is free of charge short number"060432". If none of the proposed options “works,” it is more advisable to contact the Beeline center in person.
What to do if it says failure when sending MMS from Android
Among possible reasons, why MMS is not sent from Android, we can also highlight some software glitches of the system. Despite the fact that using Android usually does not present such problems, you should know the possible algorithm of actions in such a case.
Main causes of malfunctions and solutions:
- Virus infection of files. As a preventative measure, we can recommend pre-installing a good security program. If the problem has already appeared, you need to scan the system and remove the possible threat.
- Minor system failures can occur spontaneously or due to other problems. Simple ones can be eliminated by restarting the device or resetting the settings to factory settings. In case of serious problems, you may need to reflash your smartphone, which is best left to the service center specialists.
- Mechanical failures. Typically, this kind of problem occurs when the specified network parameters are changed without permission. To correct such errors, it is enough to check the entered information.
- Installation special applications, limiting the amount of information transmitted. This is usually convenient for contract subscribers, or when using a child’s phone. At the same time, such software can block the transfer of any files, including.
Typically, the listed smartphone malfunctions do not affect the data transfer function, but in some cases this may be the problem. If the phone is under warranty, the easiest way is to contact a service center. For relatively old devices, diagnostics or repairs can be performed. It should be noted that such problems are not critical, but may indicate more serious problems that negatively affect the operation of the gadget.
Setting up MMS for all operators
Before sending the selected file, you should make sure that its size does not exceed 500 KB (for subscribers of one network) and 350 KB (for sending to another operator). Usually modern gadgets automatically compress the file to the required parameters, but it is better to check this in advance. In addition to the above problems, there may be exceptional situations, for example, when such an opportunity is not provided specifically for your region of residence. Messages in this case may be delayed or arrive in unreadable form.
Also, before sending, you must make sure that the entered number is saved in international format (for the Russian Federation this is +7xxx xxx xxxx). You should know that if the recipient’s smartphone is turned off, your message is stored for no more than 72 hours, after which the subscriber will not be able to receive it again.
An Android smartphone usually sends MMS after setting automatic data. If the instructions say that you will need to perform some manipulations, but this option is still not available, useful tips Our article will help you understand the causes of possible failures, as well as determine the cause of the problem for subscribers of different operators.
MMS is a special system for transmitting media content. According to the MMS 2.0 standard, the volume of one multimedia message should not exceed 999 kilobytes. But each operator can choose for himself maximum size sent data.
Instructions
Simultaneously with the development mobile internet, outdated methods of information transmission - MMS - remain relevant. Therefore, if you need to receive or send MMS, you first need to order the settings or enter the required parameters manually.
How to get automatic MMS settings
If you are having difficulty with manual setting MMS, then use the free service for ordering automatic settings.
Important!
Ordering settings is also available from personal account cellular operator.
Ordering automatic settings Megafon
To receive MMS settings, you should send a message with the number “1” or “mms” to toll free number 5049. You can also order settings by calling the toll-free number 05049. Afterwards, messages with settings will be sent to your phone, which you will need to save. Reboot your device and use it.
Ordering automatic settings TELE2
To order settings, call toll-free number 679. The system will determine your phone model and send automatic installations. Save the settings and reboot the device.
Ordering automatic Beeline settings
MMS connection is carried out using the command *110*181#. The combination is entered into the dialer. After receiving the settings, restart the device to register in the MMS system.
Ordering automatic MTS settings
Send a message with the text “MMS” to the toll-free number 1234. After a while, a response message with settings will be sent to your phone. Save the settings and reboot the device.
How to configure MMS manually
If the operator does not have the settings or the ordered parameters did not arrive, configure the MMC manually. To do this, open the appropriate settings section and enter the parameters taking into account the operator used.
Location of settings on different OS:
- iOS. Settings - Cellular connection– Data parameters – Cellular network data transfer.
- Windows Phone. Settings – Data transfer – Add Internet access point.
- Android. Settings – More or Wireless networks – Mobile networks– Access points – Add.
Setting up MMS on Megafon
- APN: mms.
- Username: gdata or leave blank.
- Password: gdata or leave blank.
- APN type: mms.
- MMSC (address home page): http://mmsc:8002.
- MMS proxy server (IP address): 10.10.10.10.
- Proxy port: 8080.
- MCC: 250.
- MNC: 02.
Skip other points.
Setting up MMS on TELE2
- Settings name: Tele2 MMS.
- Home page or MMS server: http://mmsc.tele2.ru.
- Proxy server: enabled.
- IP address: 193.12.40.65.
- Port: 8080 – if WAP2.0 is supported. 9201 – if WAP1.x version is supported.
- Channel or connection type: GPRS.
- Access point APN: mms.tele2.ru.
Skip other points.
Important! After setting up, you need to send MMS messages in order to correctly receive MMS sent by other subscribers.
Setting up MMS on Beeline
- Name: Beeline Internet.
- APN: internet.beeline.ru.
- Username: beeline.
- Password: beeline.
- Authentication type: PAP.
- APN type: default.
- APN protocol: IPv4.
Skip other points.
Setting up MMS on MTS
- Name: MTS Center
- APN: mms.mts.ru.
- Login: mts.
- Password: mts.
- MMSC: http://mmsc.
- MMS proxy: 192.168.192.192.
- MMS port: 8080.
- MMS protocol: WAP 2.0.
- MSS: 250.
- MNC: 01.
- APN type: mms.
Skip other points.
Modernity is the era of new technologies. Fifty years ago, no one could have imagined that today we would be able to send our favorite images and music to the other side of the country. Talk about your impressions not with words, but by sending a “documentary” of our life. One such opportunity is MMS. Multimedia messages achieved significant popularity with the advent of smartphones.
What is MMS
We are all familiar with text messages and we use them quite regularly, but they cannot be used to send either an image or a sound. The MMS service was created specifically for this purpose. The name itself is an abbreviation that translates into Russian as “multimedia messaging service.” It seems incredible, but in the US and Norway, more than two-thirds of the total is MMS. There is a version that the technology was developed by the first providers for paid storage of photos taken from users’ phones on their servers.
The difference between MMS and SMS is that thanks to it you can send not only text, but also an image, sound, presentation or video. You can combine all this with each other or with text, provided that the resulting size does not exceed 999 kB (in some phones the size is limited to 100 kB). Almost all operators support this type of message. In order to successfully send MMS, you must have 3 and 4G protocols. This is UMTS and higher. Previously, low-speed data could be transmitted via GPRS, but today this does not look serious.
Packet transmission can be used for any purpose, but is usually used specifically for accessing the Internet. Because it is convenient to charge based on time, as in telephone conversation, but by the volume of transmitted information. Which is what is required in this case. MMS is delivered in a fundamentally different way. It was found that not every message the recipient wants to read. Therefore, to save traffic, the data is delivered to the server, from where a short request about the availability of the package comes. The shelf life usually does not exceed 3 days.
Information network protocols transmitted at the moment when there are free voice channels formed by frequency and code methods. It is believed that the operator himself decides what type of information to give prerogative, but if the quality voice communication deteriorates sharply, many will want to change mobile operator. Be that as it may, with the introduction of smartphones, multimedia messages have become so popular that the issue of priority has had to be reconsidered in recent years: in the United States, many are dissatisfied with the service!
Not all phones support MMS because it requires some minimum capabilities. And the first of them is access to the Internet. Cheap phones cannot do this because they do not have the hardware and software. Physically, the phone can receive encoded information, because the transmission is on the same frequency, but it is not able to decipher and display it: there are no decoders or means of playing multimedia.
Setting up MMS
Before setting up your phone, you need to make sure that the operator cannot do it yourself. For example, MTS claims that no settings are required at all. The service is provided automatically provided that the package includes the ability to access the Internet. If MMS does not work, then you need to go here (www.mts.ru/mobil_inet_and_tv/help/settings/settings_phone/) and enter your phone number in the field by filling out the captcha.
After sending, MTS will kindly inform you whether the operation was successful. In our case, it could not be successful, since the package does not include Internet access services. This is what we were informed about. MTS is always on guard. If the settings do not want to be applied or saved, then you need to adjust the data manually. To do this, the provider provides point by point:
- Internet.
Let’s quickly move on to the last section to see what interesting things they will say there. In the window that opens, the following sub-items are offered (very competently):
- iOS for the new sixth generation iPhone.
- Other gadgets from Apple.
- Devices with the Android operating system.
- Windows phones.
- Other non-smartphone devices.
Regular phone
Shown is an old phone with CSD technology, which was later replaced by GPRS. Therefore, settings are carried out taking into account this archaic feature. In the menu you need to enable the use of GPRS, because by default there will be an attempt to transfer data without packets via CSD.
Then we proceed to setting the IP address 192.168.192.192 and the transmission port 9201.
It's time to enter the MMS server address.
MTS has already created our profile for us, all that remains is to activate it.
And yet we check whether the settings have changed over the past 10 years.
No, everything remains the same. Login: mts, and password is the same. To activate the service, we send a trial MMS to the toll-free number 8890.
Trying to set up Android
Under operating systems On Android you need to go to settings and find Wireless Networks there. Since any communication is via the air, this is the only option for a smartphone.
The ultimate goal is to find the Access Point subsection. Let's create a new one.
We enter the access point settings according to the list, if necessary, specify the MMS WAP 2.0 transmission protocol.
After this, you need to send an MMS to the toll-free number 8890.
Sending MMS
Service packages
In a typical case, setting up MMS occurs through a request for a short or regular number (see above). Several services are connected at the same time. MMS mobile operator goes side by side with 3/4G Internet. If you don’t understand, you can call support or use hotline- they will help you there. If your device supports two SIM cards, take your time to activate the service, study the tariffs and choose the most profitable one for your level of use. Next, let's look at how to set up MMS on your phone.
The next steps will depend on what brand of phone you have. We will consider iOS platforms and Android.
MMS for Apple
Let's take a step-by-step look at what you need to do with your phone so that your multimedia messaging service will work.
- The first thing you need to do is go to the home menu and go to “Settings”.
- In the menu that opens, select the “Basic” sub-item.
- The next inscription you need to click on is “Network”.
- Next is “Cellular Data Network”.
- Having reached this point, you will need internet from another resource. Here you need to enter the operator settings. You can find them either simply on the Internet, or by accessing information from the official website, which, of course, is preferable. The fact is that they are sometimes changed, and the operator’s resource has the latest data.
- After you have entered all necessary information, you must reboot the device.
- The next step is to add your SIM card number. Again you need to go to the “Settings” settings and select the “Phone” sub-item.
- In the “My number” field you need to enter the number of the SIM card through which you connected the mobile Internet service.
- In order for the multimedia data service to work, you need to restart your phone again.
These 9 points will help you enable the MMS transfer function. If you have completed everything, but the Internet does not work, check everything again, starting from the first point. If everything is correct and the connection is still not established, try to find other data to fill out the operator settings. Even if this fails, do not despair and call support.
