In our city, the Internet provider Beeline began connecting subscribers via so-called “fiber to the home” - FTTB - in parallel with Rostelecom. Dom.ru didn’t even exist then. At first they offered different models WiFi routers flashed with proprietary firmware - D-Link DIR-300, TrendNet, NetGear, etc. Then a new model appeared, which gradually replaced the others - this is a router Smart Box. As it turned out later, this is actually the only good branded router not only from Beeline, but also among competing providers.
Setting up Smart Box yourself is very simple and there is no need to call a specialist. Now I will tell you how to do this.
Login to the configurator interface:
Device IP address in local network(), as well as login and password to enter the configurator ( admin/admin) can be found on the sticker located on the bottom of the case:
After that, open the web browser and enter the address - http://192.168.1.1. Press the Enter key and see this greeting.
Click on the “Continue” button and see this authorization form:
Enter login admin, password admin and get to the start menu Smart settings Box from Beeline.
Basic setup of Smart Box
In the start menu we need to call the configuration wizard, for which we click on the button “ Quick setup»:
This will take you to a page where all the necessary parameters are collected. Honestly, as far as I remember, this was done by Dom.ru. On devices from Rostelecom and TTK, everything is much more complicated and confusing for an untrained user.
In the “Login” and “Password” fields you must enter data for authorization in Beeline billing. The account number is used as a login in our area. I think that this is how it is organized in other areas.
In the “Network name” field, you need to come up with and enter the name of your home Wi-Fi network on the Smart Box. In the “Password” field you also need to enter key phrase, which the router will request when connecting to its Wi-Fi.
If you have also connected Beeline television, then in the very bottom section of the menu, called “Beeline TV”, you should mark the LAN port into which the set-top box will be connected. Click on the “Save” button.
That's it. You can check the operation of the device!
If something is unclear, watch the video instructions.
Smart Box firmware
As with any other router, you need to periodically update the firmware on the Beeline Smart Box to a more recent one. This measure is necessary, since new firmware versions fix problems that were present in previous ones. Download latest version can be found on the official Beeline website - link.
In order to reflash the Smart Box router, you need to click on the “Advanced settings” button in the start menu:
In the window that appears, you need to open the menu section Other >>> Software update:
Click on the “Select file” button, find and feed the firmware file to Smartbox. Now you need to click the “Update” button. The following image will appear:
After the process is completed, the router will reboot itself. The settings are usually not reset. But even if they reset, don’t be alarmed, following the instructions above you can set everything up yourself without any problems!
Working with other providers
Nowadays, switching from one telecom operator to another is a completely common procedure. Everyone is looking for a cheaper tariff, higher speed, and better conditions. This is understandable and quite normal. The Smart Box router is locked to Beeline. But if you have a Superuser password, then you can configure it for other providers. And at the same time, everything is done using standard software and no alternative firmware not required. User login with elevated rights is SuperUser. The password for firmware up to and including version 2.0.24 is Beeline$martB0x. After version 2.0.25, the superadmin password was changed. Now used in this capacity serial number devices of the type SF*********. You can see it on the sticker. For example, on my device it is like this - SF13F4FF1F78.
Next we open Advanced settings >> Other >> WAN. Smartbox works without problems with almost any other provider. Here is an example of its configuration under Rostelecom and Dom.ru:
The router supports virtual networks VLAN, which means there will be no problems with interactive TV from Rostelecom, TTK, and Dom.ru!
Beeline firmware is loaded with the latest file. Beeline SB and SB O with OW firmware buy at. The cost of Beeline S B is 1800 rubles. There are 3 web interfaces filled with Beeline, Rontel, and Gpon. A LED, Beeline Router S B O has. Beeline alternative firmware added updated distribution. Video lesson demonstrating the capabilities of controlling the Beeline TV set-top box: pause, rewind, record programs. Beeline S B unlocking for all operators. Thank you said 205 times
Download the archive with firmware files for B S B O and unpack it to local disk, for example, in folder F. Tag cloud Firmware for tuner O 800, HUAWEI SAX MT882 how to flash and break LINK connection to any, Beeline S B O, Review of alternatives. Thank you said 618 times. Firmware for router S B O dual-band WF router Beeline S B on B O. Reinstallation software performed with the sole purpose of ridding the router of bugs in the previous firmware. You have become a Beeline television and Internet subscriber in Saratov, having connected through the 21st Century House promotion and delivered to your apartment per day. Now, in the new personal account My Beeline you can easily monitor expenses and connect services. After flashing the Beeline router, it must be rebooted from new firmware, after which S B
A more interesting option is to install some popular alternative firmware on it, like or. B alternative firmware. Wait while the router performs the firmware update, this process takes approximately 5 minutes, after which the router. Thank you said 467 times. Beeline S B router is logical. Instructions for the Beeline S B router installation and configuration of the equipment required for the current firmware version. B S B Alternative Firmware. Lying abandoned at home, sent to scrap immediately after connecting to BeeLine L2TP, t
Thank you said 465 times. S firmware for other providers, a fresh file has been uploaded. Download the latest firmware for B S B O and extract. Firmware S S B O B S B brand. Beeline router S B O. S alternative firmware download. The Beeline S B O router has four LAN outputs, provides. Router firmware updated file added
Carefully read the instructions for flashing B S BOX ONE and. Alternative firmware for the Beeline router, the current distribution has been downloaded. Wait while the router performs the firmware update, this process takes approximately 5 minutes, after which the router needs to. Beeline S B O routers. Starting from the firmware version, the superuser password is changed to the device serial number SFXXXXXXXXXX. In our city, the Internet provider Beeline began connecting subscribers via so-called optics to the FTTB home in parallel with. Beeline router alternative firmware uploaded a new archive. Beeline router firmware alternative firmware updated file uploaded
There is nothing secret when flashing the B S BOX ONE firmware, so this procedure is not even possible experienced user. Now I took their S B, then SB O from. Beeline SB and SB O with OW firmware advertisement for sale in Krasnodar. That’s why I started looking for alternative firmware for the smart box and soon realized that there weren’t any and not in the near future. E-line router settings S B Firmware update. WF Beeline S B, or. S alternative firmware from Beeline Forum. Hello everyone, so there is S B O, I read that it is supposedly identical to the regular S B! Other with tags, Beeline, beeline, firmware
S B B N300 firmware [. Download current version You can download the firmware from the official Beeline website or here.
During operation Smart router-Box users need to reconfigure equipment, which requires entering an individual login and password. But what to do if the router password is irretrievably forgotten or lost and cannot be recovered?
In this case, you can unlock the router Beeline Smart-Box by resetting the settings and then entering your credentials and password, among other things.
What to do if you forgot the password for the Smart-Box router?
To unlock the Smart Box router if the password is lost or forgotten, you need to change it. With the current settings, it is no longer possible to change the password. You need to perform a factory reset and then enter the required data following the recommendations below.
- Check that network cable the computer was connected to one of the LAN ports located on the device.
- The cable that is routed into the apartment must be connected to the “WAN” port.
- Press the “Reset” button located on the router body.
- On your computer, open your existing Internet browser and enter the following combination in the address bar - 192.168.1.1. The welcome management page will open. wi-fi router. Click on the “Continue” button on the screen.
- On the “Start over” page that opens, you must enter standard login and password. Enter the word admin in both lines and click Continue.
- In the menu that appears, select the section “Quick setup”.
- Here you need to fill out several subsections described below.
In the “Home Internet” field, enter your new username and password. Other Beeline home Internet settings are already embedded in the device’s memory and do not require adjustment.
In the subsection “Wi-Fi network of the router” you need to come up with the name of your home wireless network and a password to access it (at least 8 characters).
“Guest Wi-Fi network” has similar characteristics to a home network; here you also need to enter a name and come up with a password.
In the “Beeline TV” field you need to select a port to connect the set-top box. This option is relevant if, in addition to home Internet, you also use Beeline television. You only need to fill out this subsection when connecting a TV cable to Smart-Box router. Select the number of the port to which the cable going to the set-top box is connected.
After completing all the necessary settings, click “Save”.
Saving the settings will take some time, usually about 1 minute.
Having made an Internet connection, the router will start working, and the message “Internet connected” will appear on the screen.
Reset Beeline Smart Box router
In order to reset the router, you need to find the “Reset” button on the side where the cable connection ports are located. It must be pressed using a match or a toothpick (do not use sharp objects such as a needle, you may damage the button). The button must be pressed for 10-15 seconds until the indicators on the front side of the device blink. After this, the router will boot from standard settings and will be completely ready to configure according to the instructions above.
Don’t forget to write down your new login and password so that in the future you can quickly make the necessary changes to the settings without resetting the router!
Video: Instructions for setting up a Smart Box router
Beeline company on the market cellular services has existed for a very long time, providing its customers with high-quality communications, different services, prices are different, some are quite budgetary, which indicates that they do not profit from customers, there are promotions and bonuses. Recently, the company began producing high-quality equipment and one of these creations is a router: Smart box one- excellent Beeline router!
Firstly, the most important thing that a modern person needs is to keep up with the times and the price, in this case you won’t go broke with a smart router, because the prices are very cheap, especially if you take the all-in-one tariff for it, the cheapest is 600 rubles . per month, includes: mobile payment (including Internet), and the most suitable for active users is “all in one 5” 2500 (and this is payment for 5 numbers, television and Internet!), and secondly, the quality of communication. This is exactly what the Beeline smart box is needed for.
Connection. You need to connect the cable installed by specialists into the apartment, in WAN port Wi-Fi, and the computer in the LAN port. It’s even possible wirelessly, but if you’re a beginner and don’t know how or aren’t sure, it’s better to use the regular method.
Setting up Wi-Fi - on a Beeline router
- Connect the computer network cable to any port of the router. (there are 4 of them, called LAN) And the cable that was brought into the apartment is connected to the WAN port in the same router.
- Open the browser and enter: 192.168.1.1. If you entered everything correctly, you will be greeted with a greeting, then click continue.
- Enter login - username and password. To make it easier, you can enter, without inventing your own, in the first and second fields of bilain. Continue button.
- Select "Quick setup".
- The most difficult part begins, but almost everyone copes, and if not, Beeline operators will be happy to help:
You find yourself in the section - “ home internet“Enter any number or letter in the “login” and “password” fields just like that.
In the “Wi-Fi network of the router” section, you configure the wireless network.
- If the network frequency is 2.4 GHz: enter a name in the Network name field (everyone will see it, including you), this will be the name of the Beeline router from now on, then enter a password of at least 8 characters.
- If the network frequency is 5 GHz: enter the Network name, for example, ali_wifi70G and create a password.
- “Guest Wi-Fi network” - setting up a wireless network (optional).
- – if television is connected, then you need to select the router port from the TV. Next, “save”.
- Wait about a minute for it to set up. Great, setting up the Beeline smart box one router is complete!
Where to buy a smart box router?
Smart boxes can be purchased at any electrical supply store or at Beeline stores. Its cost is 2500 rubles. To be sure of the quality of the product, this brand and product, you can watch video reviews, most of them are on YouTube. There is also a Beeline smart box one forum, whose participants share problems, help solve them, in conclusion, no one has yet canceled customer reviews, here , which will truly help you understand the product.
Reviews about “wi-fi router Beeline smart box one”
Nikolay from Tver: (as you can see, Beeline is very large company and offers its services in almost all cities of Russia) “advantages: compact, lightweight, pleasant to look at. Disadvantages: none);
Natalya from Kaluga: « + price, design, reliability, lack of bright light indication, the seller is a friendly woman, as for easy setup for other providers. They connected, but after 4 months the Internet began to fail - “the connection was broken.” Some kind of magic you reboot, it works for about 15 minutes, and then again. Beeline operators suggested flashing it, but it didn’t work, I had to call specialists, and lo and behold, it worked!”;
Arthur from Khabarovsk:“advantages: Two wifi bands, good wifi speed, does not freeze, compactness, not a strong indicator light, many inputs.
Flaws: Unfortunately, it is blocked only for Beeline; you cannot connect other telecom operators. But when you go into the router settings using SuperUser and the password, series - router number - all functions can be unlocked and you get an excellent router that works with any provider.
