Sometimes there are situations when the tablet does not work or it does not show clear signs of life at all. It would be necessary to flash, but how to do it? By and large, this process is not a complicated procedure. The main thing is to do everything right and I will try to help you with this ...
And so let's start ... The firmware can be downloaded from the official website Huawei - S7-931u_FIRMWARE_Android4.0_C001B019SP19_General_Version_05011CYW.zip . Unpack the archive. In folder update are the folder download and instruction ( MediaPad 7 Lite SD Card Upgrade Instructions) on the English language. We connect the tablet to the computer using the cable included in the kit. In tablet settings select Media Device (MTP) or item - USB drive.
Go to computer and copy download to the root folder SD-cards. I used the one that was on the tablet. The only warning in this case is SD card must be formatted in FAT or in FAT 32. Then, after the firmware, delete or move download to a different directory so that the next time you turn on the tablet, the installation process will not start again. It's better to use another one. I have a free hand SD- there was no card. After copying is completed, disconnect the cable from the tablet, check the charge level (35% will be enough), turn off the tablet. Just in case, we take out the SIM card (if there is one) from the slot and turn on the tablet again. The flashing process will begin, lasting 10-15 minutes. If there is such a splash screen - the firmware ended with an error, remove SD card and reboot the system. Then you can try to start the process again ...
The appearance of such a splash screen indicates the successful completion of the firmware, we take out SD card and the system reboots.
Next will happen auto tuning settings and the system will reboot again. Next, set up the language - and here click on the line - English and from the dropdown select − RRussian .
Then set the time, date and time zone, there will be an offer to log into your Google account and other insignificant little things ...
This completes the firmware process ... with which we can congratulate ourselves !!!
The only thing that needs to be dealt with on this firmware is the keyboard. Unlike firmware. HUAWEI_S7-931u_FIRMWARE_Android4.0_C170B003_Russia_Channel here is the keyboard from Huawei IME does not work and you need to additionally configure the input of the English and Russian layouts on the settings tab - Language and Input(switch on the bottom panel of the screen by clicking on the small keyboard icon) or set the Russian Keyboard to Play Market.
Video - Huawei MediaPad 7 Lite - tablet firmware process (2nd method)
in front of you detailed step-by-step instruction about how to flash a tablet Huawei MediaPad 7 Lite. Our editors have chosen the most appropriate method for flashing this Huawei model. If a this instruction will not give a result try flashing with another method: TWRP Recovery , ROM Manager, Fastboot or classic OTA.
Warning! After flashing the device, all your data from internal memory- will be erased, so to save your contacts, settings and applications, first save all the data from the tablet.
Installing the system way CWM Recovery 1. Charge your flash tablet at least 80%. 2. We save from a flash drive, sim card and tablet memory all the data that cannot be lost. Simka (if any) can be pulled out. 3. We place the necessary firmware in the memory of the tablet. The firmware file must be in archive format zip. You can select and download the firmware. 4. All Huawei tablets have Recovery from the manufacturer, so we change it to ClockWorkMod Recovery. We do it according to the following instructions: Install the app from Google Play on your tablet. Play it and provide Root rights. If there are no root rights on the tablet, we get them by.
Select "CWM Recovery" from the list of options. 
The application will then show a list of available Recovery. In the example, Rashr showed 2 options: ClockworkMod with support for tapping the screen and the classic version (controlled by the volume and power buttons). 
You will be prompted to download. Click Yes. 
Then the download of the CWM Recovery image for the tablet will begin. 
A notification will appear that the firmware was successful and you now have a modified recovery installed. We immediately go into it, for this, click "Yes". 
Ready. If you already had ClockworkMod Recovery installed, then simply enter it by holding any of the combinations for 3-5 seconds: - Volume up + power button - Volume down + power button - Volume up / down + power button + "Home" - Volume up + volume down + power button 5.
Movement in the Recovery menu is carried out using the volume buttons, and confirmation of the selection with the power button. Before installing the firmware, you must first reset the settings. So choose from the menu wipe data/factory reset.
6.
Next, simply confirm that you agree to reset: Yes - Wipe all user data.
7.
Now in the main menu of the Recovery, select install zip.
8.
After that select Choose zip from /sdcard.
9.
Navigate to the folder where you saved the firmware zip file and select it. 
10.
You will be prompted to confirm the action. Select Yes - Install....
11.
The firmware installation process will begin and the inscription will appear at the end Install from sdcard complete.
The firmware is finished. We return to the main menu of CWM Recovery and reboot the tablet. For this we choose reboot system now.
12.
Ready. The tablet will start downloading from the already installed firmware. Other materials
Users of this gadget sometimes have to be puzzled by such a question in case of serious malfunctions in the operation of their favorite device, when any other measures no longer help. And sometimes it's just to improve the software on the tablet. The firmware procedure, in general, is not complicated, and if you adhere to a certain plan of action, there are no problems.
And so let's start ... There is only one link to the firmware for MediaPad 7 Vogue, which can be downloaded from the site Huawei — S7-601u Firmware(S7-601u, Android 4.1, C232B003, General Version) . After downloading, unzip the archive. The archive contains a folder - sdcard_upgrade (with folder download inside) and instruction (S7-Vogue SD-Card Upgrade Instructions) in English. Connect Huawei MediaPad 7 Vogue to a computer using USB -cable included. In tablet settings, select Media Device (MTP) or item - USB drive. Copy the folder download to the root folder of the SD card. Make sure that the SD card has enough space (more than 2G) to copy the update file, and it is formatted in FAT 32.
1. Make sure that the tablet is turned off, and first make sure that accumulator battery has more than 30% charge or connect the tablet to the charger.
2. Insert an SD memory card.
3. Press the power button to turn on the device. The tablet will turn on and the firmware update process will begin. If the instructions are followed correctly, the following window will appear on the device screen:
4. After the update is completed, OK will appear on the screen:
5. After the firmware is successfully installed, remove the memory card and hold the power button for 10 seconds to reboot the device. And then the tablet will update the system configuration. After the next reboot, the first login will occur, where you must first configure the language - and here click on the line - English and from the dropdown select − RRussian . After completing the remaining necessary steps, the tablet can be used normally.
Please note: Do not remove the memory card or press the power button until the update installation process is complete.
If an update fails during an update
repeat the update procedure from the beginning.
User's manual Huawei MediaPad 7 Vogue (Lite II) in Russian can be downloaded from this link -
