01.10.2017 16:00:00

Types of protective films

The main task of the film is to long time maintain presentation cell phone. In addition to this task, protective film is used to matt the screen, or vice versa, to create a glossy effect, and protects the screen from fingerprints. Accordingly, you can purchase a variety of films depending on the purpose of their use: matte, glossy, anti-reflective. Each person chooses a film based on personal tastes and preferences. Thick films are easier to stick than thin films. They don't stretch. However, it is worth considering one fact: a thick film reduces the color rendition of the screen and its sensitivity.

Glossy films of medium thickness are considered universal. You can find them in communication stores or online stores. They will suit any user. If you don’t know how to stick a film on your phone, we will help you. Everything is done as simple as shelling pears.

Sticking a film on a phone: Necessary conditions and available means

We will need a soft napkin. You can take one of those used for wiping monitors.

Where to stick the film on the phone? It is better to carry out such a procedure in a room where there is not a lot of dust. You can use the bathroom. To create high humidity, which is an indispensable condition for proper film gluing, turn on the water for a couple of minutes. Use a plastic spatula or credit card.

How to stick a film on a phone

The film is applied to your mobile device in three stages. We will describe them to you below.

1. How to cut a film for a phone that matches its size?

In order not to be mistaken with the dimensions, use as a sample the film that the phone was equipped with during packaging at the factory. It matches the screen exactly and will serve as an excellent example.

Remove the original film and place it on the protective film, carefully aligning it.

Take a special knife and scissors. Using them, cut the film of the required size according to the existing sample. In a couple of minutes, the result is ready - a new film for your irreplaceable and favorite gadget.

2. Applying a protective film to the phone: preparing the device

Your first step in this procedure is to thoroughly wipe the screen with a microfiber cloth. Then we prepare a solution based on soap or shampoo in the following proportions: add one drop of soap to twenty grams of water. We take a brush and use it to cover the screen with a thin layer of the prepared solution. This procedure will help the material not stick haphazardly, and will make it possible to easily fix it in the correct position.

3.

The material we will have to work with has two different protective coatings. On the front side it is colored, and on the side of the adhesive layer it is transparent.

You should remove the transparent coating, and then place the film with an adhesive layer to the screen. Carefully align the film. The previously prepared solution helps us with this.

Now feel free to remove the second coating. It's time to use a plastic card. Use it to expel the air formed under the film. Do this from the center of the screen to the edge. Wipe off any remaining soapy liquid with a swab. Avoid getting the solution on the device buttons.

Other Fly smartphones
All Fly phone models can be found in our online store.

That's it. The hard work is done! Your mobile phone is like new.

Leave the device alone for a while to allow the film to dry. After an hour or a little more, you can safely use it.

• To properly stick the protective film on your phone around the edges, cut it with a gap of a millimeter from the edge of the screen.
• Avoid touching the adhesive side of the material, otherwise there is a risk of dust being deposited on it, which may cause bubbles to form.

Now you know how to stick a protective film on your phone yourself. The next lesson will be devoted to how to resuscitate a phone that has fallen into water. Don't miss it!

Hi all!

Today we have a rather unusual article.

I think each of you has a mobile phone. It doesn't matter what brand or type.

When buying a phone, we all think about buying some kind of accessory for it, be it a film, a case or a lanyard. Don't forget that a case and film are not only a way to transform or decorate your phone, but also a method of protecting it from unwanted drops and, even worse, repairs.

So, when you buy a phone, in 90% of cases you will be offered to buy and stick a film on it. You can pay for this service, or you can try to stick the film yourself. I think every second person has wondered how to properly stick the film on the phone screen. There are many options and everyone glues the film in their own way.

Today I will tell you how to stick a film on your phone.

I assure you - there is no such surface that would not be scratched, there is different types surfaces: some are more scratch-resistant, others are not.

This is a very delicate matter. Sticking a film on a phone without bubbles is not so easy. For this we need:

As a rule, when you buy a film, there is a cloth included, I want to disappoint you right away, it is ideal for wiping the film when it is already pasted on the screen. Before we stick the film on the phone screen, we need to wipe the display perfectly! A glasses cloth is ideal, but if you don't have one, you'll have to do a little fiddling with preparing the display.

After we have thoroughly wiped the display, we take the tape. We need it in order to additionally go over the screen and remove dust particles, lint, etc. from it. In 99% of cases they remain after wiping the surface.

Some believe that the procedure with tape is necessary to ensure that the film “sticks” to the phone). This is not true, because on the inside of the film there is a very thin layer of silicone, 0.125 mm thick.

As a rule, the film is covered on both sides with protective layers; they can be easily removed using special corners, which are marked in red and green colors. There are exceptions when the film has a protective layer on only one side (which lies on the display).

After we have prepared the display for gluing, carefully remove the first red part (but not completely, as shown in the photo) and bend it, thereby running it along the display.

The most important thing- it is ideal to apply the film evenly to the screen first. If you made a mistake and applied the film crookedly, then this “crookedness” will come out on the other side of the surface when you are almost finished applying it to the surface of your device.

As a result, there will be an air bubble on the edge of the surface and you will have to lift the film again and align it with the body, but even with this procedure, the possibility of debris, dust particles, and other things getting in is not excluded! Be careful!

After gluing the film, carefully walk your gaze along the edges of the film and see if anything has gotten there. If specks appear in the middle of the display, it is better to immediately remove them with a piece of tape or a sticky sticker.

So, finally all the defects are eliminated!

You can remove the second, green protective layer of film. You need to be careful here, since the protective layer can rise with the main one, but we don’t need that.

I hope that in this short article, I conveyed to you: how to properly stick a protective film on your phone screen. I understand that the procedure is not simple and requires some perseverance and patience.

Of course, there are no guarantees that you will get everything perfect the first time, but, as they say, “you can’t drink experience away”! I think that I was useful to you, because when I came to this, no one taught me).

I almost forgot to answer the question: “how to properly glue the protective film on the tablet”? Yes, everything is simple) The scheme is the same, but there is more film, and even more accuracy is needed. I recommend starting with your phone).

I wish everyone “bubble-free” films.

If you find an error, select a section of text and click Ctrl + Enter or use the link to let us know.

You will need

• - mobile phone;
• - protective film for the phone screen;
• - means for cleaning the display surface;
• - ruler or calendar (optional).

Instructions

Before you start applying the film to your phone, remove all accumulated dust, crumbs and fingerprints from the surface of the screen. For this it is best to use special means. Wipes are ideal for cleaning your computer monitor screen. Unlike cotton wool, other napkins or fabric, they do not leave lint or streaks on the display. If you use alcohol, the display surface mobile phone may suffer significant damage.

When you wipe the screen, hold the device by back panel. It is best to place the phone on a dry and clean surface - for example, on a windowsill. There should be no dust in the room, as it will quickly settle on a wet display.

To apply a protective film to your mobile phone, remove it from the package and place it in a dry and clean place. You may find protective stickers on the film. You shouldn't take them off right away. First, look at the inscriptions that are on them. They are marked with numbers (1 and 2) so that it is clear which side to glue the film on.

Place your mobile phone in front of you. To properly apply the film to it, first place the right side of the film on the display. Then carefully, being careful not to leave a mark on the film itself, peel back the protective sticker. This needs to be done not in width, but in length.

Place the unprotected edge of the film against the display. Do this slowly, carefully applying the film so that it lies evenly. See how well it fits against the edge of the display. If necessary, carefully adjust it. Try to ensure that the film immediately fits neatly into place: if you glue it and remove it more than 3 times, it will not stick.

When one edge of the film lies evenly along the edge of the screen, you can remove the rest of the protective sticker. Do not rush, remove gradually, from top to bottom. You need to do this: when one edge is glued, continue the process on top of the screen. This way you can help the film stick with your finger without touching the screen.

Go to the bottom of the display. When you apply the film, bubbles may appear on it. To avoid this, during gluing, gradually and very carefully smooth out each glued millimeter of film. This will prevent air from getting between it and the screen.

If you were unable to avoid bubbles, try to remove them from there. To do this, you can use a calendar, ruler or credit card. Simply swipe the top corner of the display, working your way down. At the same time, the air accumulated under the film will be released, and the surface of the screen will remain flat. However, do this carefully to avoid scratching the protective film. Do not use any sharp objects for this purpose - this will damage both it and the display. Pasting a film on a mobile phone is not so difficult, the main thing here is to accurately determine its position on the screen, do everything efficiently and gradually, do not rush.

A protective film for the display is a very useful and necessary thing. It protects the surface from impacts and dirt that our mobile phone encounters every day. When purchasing a new phone, a protective film is rarely included in the package; most often you have to buy it separately.

You will need

• mobile phone, protective film

Instructions

A line will be glued to one side of the film. Trim the excess edges so that the resulting film is the size of your phone's display.

Start fixing the film. Move from top to bottom from the speaker to the phone microphone. After you have glued the film, carefully smooth it over the surface of the screen.

Video on the topic

Useful advice

If handled carefully, the film can last quite a long time.

Sources:

• how to make a phone film

To save the display of a mobile phone, camera, media player or any other mobile device, you can stick a special protective film on it. A thin layer of transparent plastic will protect the screen surface from scratches, abrasions and damage. The protective film can be matte, glossy or have a reflective mirror surface, but any of them will perform the main function - protecting the display.

Instructions

After releasing a small part of the adhesive side, start gluing it. Carefully apply the film to the display and align it with the top edge of the phone screen. Release the rest of the film from the polyethylene as you stick it.

Smooth out the glued part with the card supplied in the kit, or take a credit card if there is no special cardboard in the package. Do not press on the screen with your fingers.

If there are small bubbles left, do not touch them - they will disappear over time. If you didn't manage to stick the film evenly the first time, don't be discouraged. Pry it up by the corner and re-glue it - it does not stick tightly to the screen. If the quality of the product is good, the film can be washed with water and re-glued.

Do not stick the film too close to the edge, leave a small gap. If several dust particles get inside during the gluing process, do not remove such film and do not wash it. It’s better if you don’t glue it, and after a while the dust particles will be less noticeable. While using the phone, the film good quality Can be removed and cleaned - wash under running warm water.

Useful advice

Buy the film immediately along with your phone. During operation of the device without protection, dirt will appear on the screen, which will then be difficult to remove.

Sources:

• How to properly apply protective film to the screen
• How to disassemble a smartphone with touch screen using unibody as an example

Tip 8: How to apply a protective film to your touch screen

Everyone who has touch phone or tablet, will agree that these devices cannot do without a protective film. Without it, the screen will immediately get dirty, and it won’t be difficult to create scratches. Therefore, every owner of a touch screen device must be able to apply a protective film himself. And now I will tell you how this is done.

The smartphone market is growing every year - dozens of new brands and thousands of new models are appearing. Each brand brings something different, and soon it becomes fashionable. This is how glass screens on one or even both sides of the device came into fashion.

However, in the pursuit of fashion, you often have to sacrifice convenience - glass gets scratched quickly, so to protect it you need to use a special film, but in order for it to protect, it needs to be glued correctly, and this is not an easy task.

Requirements when choosing a film

To answer the question of how to properly stick a protective film on your phone, you just need to strictly adhere to a certain sequence of actions, and in this case the result will be excellent. So, first you need to choose a suitable coating from among the many various models. All of them can be divided into 3 groups:

• Official licensed products of the same brand as the smartphone, designed specifically for it;
• Films from other manufacturers for this device model;
• Universal films that need to be cut to fit your model.

The type of coating chosen will determine its service life and how good it will look on the device.

If the cost of a smartphone is quite high, and the brand is quite well-known, then you should contact either the company’s official website or consultants - large companies often make accessories for their gadgets themselves, and they last longer and look better.

For non-standard screens or rare models, the most the best option will be the purchase of a universal coating.

Basic mistakes when gluing film

In most cases, the sticker is done by employees of the stores where the smartphone is purchased, but sometimes, after purchasing a new film or not wanting to give extra money, you have to do it yourself. At the same time, it is very difficult to stick a film on a phone at home without instructions, and often inexperienced users make serious mistakes.

Mistake #1

The most common and irreparable mistake is to stick film on a dirty screen. The coating will deteriorate and the coating will become unusable. This is almost impossible to fix, since there is an adhesive layer on the back of the material, which instantly collects all the dirt from the screen and spoils the glue.

Mistake #2

It is not recommended to stick the covering in a living room where there are a lot of fabric items - there will definitely be dust in the air, which is quite difficult to remove if it gets under the film. This is one of the most common reasons replacing the coating - dust forms bubbles that grow over time.

Mistake #3

The adhesive layer on the film is very thin and easily erased, so it is often damaged by the fact that many owners take it in their hands and damage the glue, thereby making the coating unsuitable for use. The film should be held only by the edges like a disk, without touching the bottom layer or using rubber gloves.

Best gluing method

Thus, you can stick a film on your phone without bubbles only by adhering to a certain step by step instructions, which can be found below:

1. First, you should prepare the coating, if necessary - after unpacking the packaging with protective film, cut the workpiece to the required size;
2. Then find a suitable place, previously cleared of dust in the air - to do this, just moisten it with a spray bottle;
3. You need to prepare the gadget - wipe and degrease the phone screen before applying the film;
4. To glue the film to your phone yourself, you need to take a plastic card - it will help to align it;
5. Now you need to peel off the bottom protective layer of the film;
6. The protective film should be applied to the phone from one edge - vertical or horizontal - gradually to the other side;
7. You need to apply the film to the screen and smoothly, using a card to expel the bubbles, align it with the glass;
8. After completion, you need to remove the remaining bubbles using a card, smoothly smoothing the coating and bringing them closer to its edge.

You can learn more about how to stick the film in the video below:

Work on mistakes

If there are still bubbles under the film or dust has got in there, you should, as soon as possible, using office tape, lift the edge of the covering, pry off the debris and smooth it out again. In this case, you should try not to touch the glue or screen with your hand, as this can cause rapid wear of the coating.

If the problem is only the presence of a bubble, you can simply pierce the film in this place with a thin needle, expel the air and level the coating again with the card. You can also apply varnish on the tip of the needle to the hole to prevent reappearance bubble

Thus, not only workers can glue the film to the phone efficiently. service centers. You can do this yourself, just by following the instructions and approaching the matter in good faith.

The use of a protective sticker is associated with some special features. Gluing without taking them into account will result in a film with bubbles. When you try to re-stick it, small particles are attracted to the sticky surface and contaminate the screen.

What is special about the process?

The first step is to choose a good film. The range of goods is quite extensive, as are their prices. Don't go for cheap. Inexpensive stickers are usually of low quality. Pay attention to the manufacturer. It is better if it is a well-known, reputable brand.

Another important factor before that, film without - this is preparation. It must be thoroughly cleaned. To prevent new particles from getting in, it is advisable to do this in the bathroom. The air here is quite humid, which makes cleaning easier.

During the cleaning process, it is prohibited to use aggressive substances. For these purposes, a special rag is sold complete with the film. It helps clean the screen from dirt and dust.

Use tape to remove tiny particles from your phone. First, stick it on the screen, then sharply tear off the tape.

The phone display must be dry before gluing. It is not allowed to stick wet film. This can lead to damage to the gadget itself.

The film must be applied gradually, starting from the edge. To do this, bend its protective part and begin gluing it to the screen, carefully smoothing it out. Gradually move in the opposite direction.

To make it easier to align the film on the screen, apply a soap solution. To do this, add a drop of liquid soap to 20 g of liquid. Apply a layer with a brush. Try to keep it very thin.

Don't worry if you didn't succeed in sticking the film the first time. It will be useful experience, which will help you avoid making mistakes the next time you try.