Doesn't exit recovery mode. How to Enter and Exit iPhone or iPad Recovery Mode

I think almost all iPhone and iPad owners, at least once, have found themselves in a situation where, after installing another tweak or simply during a jailbreak, the gadget or system failure simply refuses to boot in normal mode. What to do, what to do and where to go for help? Don’t rush, you can restore the functionality of your iDevice yourself at home, as they say: “Recovery Mode will help you.”

You can restore your iPhone or iPad to working condition in almost any situation, of course, if the cause of the failure is software. For this purpose, iPhone recovery modes are provided (for example), which include:

DFU mode(Device Firmware Update) - device firmware update mode
Recovery Mode- recovery mode.

Before proceeding directly to the recovery procedure, let's figure out what Recovery Mode is, how to turn on the iPhone in recovery mode and how to get it out of this mode.

What is Recovery Mode?

Recovery Mode, which translated from English means “recovery mode,” is an emergency mode designed to restore the working state of an iPhone or any other mobile device running iOS if software failures occur that result in the device shutting down and making it impossible to boot in normal mode.

The recovery mode, like DFU Mode, refers to special modes provided by the manufacturer, so you don’t have to worry about the safety of warranty obligations when entering these modes.

Why is Recovery Mode needed?

iPhone recovery mode, in particular, is used when the gadget does not boot in normal mode (the display shows no signs of life, the device does not respond to pressing the control buttons).

How to enable iPhone recovery mode?

You can switch iOS devices to this mode from any state by simply pressing the “Home” and “Power” buttons, to do this:

Fully, iPad or any other iOS device in any available way;
Home«;
Connect your iPhone using USB cable to a computer (this can be a Windows PC or Mac) while holding down the " Home» pressed;
An image with the iTunes icon and a standard USB cable will appear on the device’s screen, this will confirm that the iPhone is loaded into Recovery Mode;

iPhone in recovery mode

Launch iTunes and make sure your device is booted into recovery mode.

iTunes warning about recovery mode

Device in recovery mode in iTunes

How to exit recovery mode?

Exiting recovery mode is easier than turning it on; to do this, you need to reboot the device in the usual way:

Disconnect the USB cable from iPhone;
Long press the power button ( Power) turn off the device;
Short press the same " Power» turn it on again;
Wait for the device to boot in normal mode.

There are times when an iPhone or any other iOS device refuses to exit Recovery Mode using the standard method, no problem, you can help the gadget with this:

Disconnect your iOS device (long press the " Power"or by simultaneously long pressing the buttons " Home" And " Power«);
Disconnect the USB cable from iPhone;
Press and hold the " Home" and briefly press " Power» until the Apple logo appears, the « Home» continue to press.

Sometimes, this is especially true for owners of jailbroken iOS devices, during the process of jailbreaking or flashing the device, it automatically boots into Recovery Mode, signaling a software failure and no standard manipulations (regular reboot, forced reboot) help, the iPhone is stuck in recovery mode.

Special programs will help get him out of this state. TinyUmbrella(official website) and redsn0w(developers website).

There are a few more, but these two are enough. Note that the programs will help you get your iPhone (for example) out of Recovery Mode only if system errors occur when restoring or updating in iTunes.

Additional tools in redsn0w

Recovery in redsn0w

DFU Exit Wizard redsn0w

What is the difference between Recovery Mode and DFU mode?

The key difference from Recovery Mode is that every process of updating or restoring firmware via iTunes occurs from Recovery Mode. Even if you update the iPhone firmware, for example, in normal mode, iTunes, during the flashing process, automatically, without user intervention, puts the iDevice into recovery mode and iOS updates occur from this mode.

Recovery Mode is a software mode; in this mode, the iOS device responds to pressing the control buttons and, which is very nice, you can enter and exit the iPhone from recovery mode programmatically.

Video instructions on the topic “How to turn on iPhone in Recovery Mode”

About the main thing in a few words

Let’s assume that after a software glitch caused the iPhone to spontaneously reboot, the device stopped responding to presses of the controls, neither “Home” nor “Power” worked, the screen completely went dark, and even long presses on the power button did not produce results. What to do and what to do, how to restore an iPhone?

Place your device in recovery mode(see above for how to do this), connect (if you have not already done so) it to your computer and launch iTunes. After the program recognizes the iOS gadget in “stabilization/recovery mode,” click the desired button (restore or update) in the program window.

As a result of simple manipulations, you will be able to restore the device’s functionality at home in 90% of cases. If you are among the remaining 10%, ask for help in the comments to this instruction, we will try to help you!

Apple devices are distinguished by a high level of reliability. Errors in them occur very rarely, “glitches” occur infrequently. Thanks to this, they have earned the honorary title of the most reliable and error-resistant smartphones/tablets. However, in some cases, errors still occur, which leads to incorrect operation of the devices. What to do if your iPhone or iPad starts to behave incorrectly or stops loading altogether? How to enter recovery mode on iPhone or tablet?

In this article we will look at:

How to start recovery mode on iPhone and iPad;
How to enter DFU mode;
What is the difference between recovery mode and DFU mode?

After reading this material, you will receive maximum information about restoring the functionality of Apple devices.

We have already talked many times about restoring iPhone and iPad using DFU mode. Now we need to learn a new term - this is recovery mode (or Recovery Mode). It allows you to get rid of errors in the functionality of smartphones/tablets and perform a factory reset. How is it different from DFU mode?

The main difference is that user data in the internal memory remains safe and sound. The recovery mode also has the following differences:

Components and modules of the operating system are rolled back to factory settings, but are not created anew;
All parameters are reset to factory settings;
The integrity of the file system is checked - the devices are prepared for correct startup.

The same DFU mode provides for the complete deletion of all user data, complete formatting of the internal memory and re-creation of modules and components - that is, it is as if a complete reinstallation of the entire operating system occurs.

Despite the safety of the recovery mode, you still need to create backup copies before entering this mode - you never know what can happen to important data.

Entering iPad and iPhone Recovery Mode

We have already talked about how to enter DFU mode and restore the operating system to its original factory state. To do this, you need to hold down the Power key and the Home key, wait 10 seconds, release the Power key and continue to hold the Home key for another 10 seconds. Next, release the key and switch to DFU mode - all this time the smartphone/tablet must remain connected to the computer.

Please note that when entering DFU mode, iTunes must be running on your computer, which will restore your device. It will recognize the device connected in DFU mode and prompt you to take the appropriate actions.

In order to enter recovery mode on an iPad or iPhone (Recovery Mode), you must perform other steps. First, turn off the device completely - its screen should turn black. Next, click on the “Home” button and connect the smartphone/tablet to the computer. After a couple of seconds, the iTunes application icon will appear on the device’s display – recovery mode is activated. By clicking on the corresponding button in iTunes itself, you will start restoring the operating system.

Here we see another difference between the recovery mode and the DFU mode - in the contents of the screen. If you enter DFU mode, the screen will be black, and iTunes will notify you about working in this mode. In Recovery Mode, the iTunes application icon with the cable connected will be displayed on the screen. In addition, when entering recovery mode, iTunes must be turned off on the computer - launch it after the logo of this application appears on the screen.

How to get iPhone out of recovery mode

Putting your iPhone into these modes does not affect your warranty, so you can use these modes as many times as needed. But what if you suddenly change your mind about returning your Apple device to its original condition? How to get iPhone or iPad out of recovery mode? This is done literally with one click of a button. The main thing is to think about your actions before the start of recovery, and not during the procedure.

To exit recovery mode, disconnect your iPhone from your computer and press the power button. Hold the button for 10 seconds until the smartphone reboots. After that, it should start normally, ensuring the operating system starts. Exit recovery mode on iPad in a similar way.

Do not under any circumstances interrupt an already running recovery - by doing so, you will harm your gadgets and damage the operating system.

Often, iPhone, iPad and iPod Touch users are given the opportunity to see a black screen showing a USB cable running to iTunes. The stability of iOS is rated with the highest marks, but no one is immune from such a turn of events. Today we will tell you how to get out of this situation, and at the same time we will tell you in more detail about Recovery Mode.

Recovery mode is not the most pleasant sight for an unprepared user. The i-device turns on, but instead of the friendly loading screen it shows the picture already described above with a USB cable and the iTunes icon. This can happen for various reasons, but the most common is an error when updating iOS.

If you follow the advice displayed on the device screen and connect it to iTunes, the program will offer the easiest way - recovery. Were all your data and apps backed up yesterday? Feel free to restore! In another (and most common) case, you can try to bypass Recovery Mode without deleting all data from the device’s memory.

How to exit recovery mode:

Reboot your device. Hold down the Home and Power buttons and do not release for 15 seconds. Then turn it on by holding down the Power button for a few seconds.
If the first method does not lead to exiting recovery mode, use the special TinyUmbrella utility
If the data on your iPhone, iPad or iPod Touch is not particularly valuable or the full backup was made recently, restore the device through iTunes by clicking Restore.

Based on the fact that the last method is not suitable for everyone, and the first method does not help as often as we would like, it is necessary to consider the operation of the TinyUmbrella program in more detail:

Step 1: Download and Launch TinyUmbrella

Step 2: Connect the device in recovery mode to your computer

Step 3. Click on the unidentified device that appears in the left column

Step 4. On the right side of the window, click the button Exit Recovery

Step 5: Wait for the device to reboot

After following these steps, your iPhone, iPad or iPod Touch can successfully exit recovery mode without losing any data. If this does not happen, a major failure has occurred and there is nothing left to do but restore the device using iTunes.

How to enter iPhone, iPad or iPod Touch into Recovery Mode yourself

Step 1: Turn off your device

Step 2: Press and hold the Home button

Step 3: Connect the USB cable to your device

After completing these steps, a notification will appear on the screen indicating that your device is ready to interact with iTunes, during which you can perform a hard reset, restore, or flash your iPhone, iPad, or iPod Touch.

Speaking of iPhone. Before you put your smartphone into recovery mode and start flashing the firmware, make sure that your model is officially unlocked.

02.01.2018

Hello, I have come across many users who do not know how to enter recovery mode or DFU mode. So, in this article I will tell and show how to enter an iPhone or iPod into these modes and how to output it.

To begin with, I will write simply in text, many will understand it like this:

1.
2 . Press and hold the Home button while holding it and plug in the USB.
3
4

You basically get multiple full backups for the cost of a full backup and modified blocks. Backing up to a network share is as easy as backing up to a local volume. The main difference is that a Volume Shadow Copy Service snapshot cannot be created of a remote volume. As a result, the previous backup is overwritten with each full backup, so you only get the latest full backup image of each server on the network share.

If you decide to schedule full backups of a network resource in this manner, you should change the destination folder for each backup to avoid overwriting previous backups. Security and system recovery. System backups that include only selected files and specific application databases are useful and often irreplaceable. Instead, the backup tool only saved important system volumes. These critical system volumes represented the equivalent of system state provisioning volumes.

1 . Turn off the device.
2 . Disconnect USB and press "Home" and hold. Press the power button for 2 seconds and release. "We continue to keep home"
3 . And wait until the device boots.

1 . We connect USB and completely turn off the iPhone.
2 . Simultaneously press two buttons (Home and On/Off) for 10 seconds.
3 . At the 11th second, release the "On/Off" button and hold "Home" for another 10 seconds.
4 . Nothing should appear on the screen. If a bullseye appears, try again.
5 . And iTunes gives you this message.

How to exit recovery mode?

This means that you cannot save space like you can with snapshot-based volume backups. The following command is used to perform a system security check. As you might expect, ensuring system status also takes more time. These first numbers are, of course, based on the previous version of the operating system.

Figure 3 Specify all or selected volumes in the Select Archive Configuration dialog box. This is equivalent to system security, but backs up all important volumes, not just the important files on those volumes. In fact, I even have the option to perform a system restore using System Restore. Figure 4 Selecting volumes for backup.

1.1 When DFU mode there is nothing on the screen!
1.2 Simultaneously press both buttons (Home and On/Off) for 10 seconds. After 10 seconds, release both buttons.
2 . And then turn on the device as usual

And below I will write and show everything in detail and thoroughly.

How to Enter iPhone/iPod Touch into Recovery Mode:

1. Turn off your iPhone or iPod touch completely. And disconnect from USB.

The terminology is a bit confusing as both options fully support the selected volumes. Backing up a server using the command line. You can use the built-in scheduling wizard to automatically rotate backups between multiple target volumes. If you have easily removable hard drives, you can use this feature to set up a rotation plan. Remove the backup media and store it off-site.

For the next scheduled backup, remount the oldest backup volume to the server. It is not possible to schedule backups on Monday, Wednesday, and Friday. Figure 5 Specify the daily backup time.

2 . Press and hold the Home button while holding it and connect the USB.

3 . The apple will appear first, continue to hold the Home button.

4 . After 5-10 seconds, the iTunes logo with USB should appear on the screen. This is recovery mode. iTunes should say this with a message like this:

However, if the volume you want to back up to is not displayed, you can click the "View all available drives" button to view all connected disk devices. Figure 6 Specify the target storage media for the scheduled backup.

A new master image is also created every seven days. In this log you can check if your backups were completed successfully. You can also assign success and error events to a task, such as sending an email to inform you of the status of scheduled backups. Schedule backups from the command line.

How to Get iPhone/iPod Touch Out of Recovery Mode:

1. Turn off the device.

2. Disconnect USB and press "Home" and hold. Press the power button for 2 seconds and release. "We continue to keep home"

Specify the destination, source and scheduled time as follows. Restoring bare metal domain controller. Figure 7 The Repair Your Computer option is available on the installation screen. Figure 8 Specifying system recovery options.

However, you can also specify other backups on local volumes or search the network for backups that were stored on file servers on other servers. This option is useful if the problem causing the restore is caused by a disk failure or the replacement of one or more disks on the server. Figure 9 Disks can be easily formatted and repartitioned before recovery.

2. And wait until the device boots up.

How to Enter iPhone/iPod Touch into DFU Mode:

1. Connect USB and turn off iPhone completely.

2. Simultaneously press two buttons (Home and On/Off) for 10 seconds.

This is a fairly simple method to perform bare metal restoration on a server. Restoring the system state for a domain controller. This allows you to change startup options in System Preferences in the Startup and Recovery dialog box. Use the following command to add an entry to the launcher.

How to remove a smartphone from permanent Recovery?

This action creates a new launcher entry, copying the default launcher entry. Figure 10 Disabling incremental backups on busy volumes. In each of these cases, you must specify the backup version you want to use.

3. At the 11th second, release the “On/Off” button and hold “Home” for another 10 seconds.

4. Nothing should appear on the screen. If a bullseye appears, try again.

5. And iTunes gives you this message.

Figure 11 Determining which backups are available for recovery. This will lead to a non-authoritarian restoration. Plus, they can be created in seconds. Consider the following command. The ability to access directory data in this way makes many types of data recovery tasks much easier than before. For example, to restore a deleted object using a backup, you first had to perform an unauthorized restore of the backup on an existing domain controller, and then perform an authoritative restore of the deleted object.

How to Get iPhone/iPod Touch out of DFU Mode:

1.1 When DFU mode there is nothing on the screen!

1.2 Simultaneously press both buttons (Home and On/Off) for 10 seconds. After 10 seconds, release both buttons.

Below I will just write the points without pictures. (Someone will understand it anyway :))

If the restored backup did not contain the correct data, you needed to start over with another backup. Now you can immediately find and recover deleted data by resurrecting tombstones and snapshots, and you don't even have to take your domain controller offline.

However, there are some limitations. Therefore, a production domain controller should not have more than one or two snapshots. The longer snapshots remain active, the larger the delta memory of the Volume Shadow Copy Service, which can also impact performance. Moreover, simply recovering a deleted object is only the first part of the recovery problem. You may also need to restore associated object attributes, such as group memberships. Even so, a snapshot can help you identify all the groups of which the deleted object was a member.

Please comment on the instructions

When you try to restore your device, an unpleasant thing may happen - your phone or tablet will go into eternal recovery mode. How to enter and exit an iPhone from DFU Mode will be described below, but first you should understand what this mode is and why it is needed.

Some of the changes may initially cause tears and grinding. Therefore, consider the following guidelines when planning your strategy. Schedule periodic full system backups to recover a domain controller after a hardware failure. This will protect you to a certain extent if one of the fuses is faulty or inaccessible. However, you should make such a backup at least once a day. . Always back up domain controllers with replica application partitions, if you have defined them.

What is DFU Mode for and how to enter it?

DFU is a special mode that is used for emergency updating, flashing or booting a device from a backup. It is used if the phone or tablet is frozen and does not respond to commands. DFU Mode works in tandem with the iTunes computer application, which is used to perform all firmware management operations.

Working with a database queue on transport servers

A queue is a temporary location for messages waiting to enter the next processing phase. Queues are only available on computers that have the Hub Transport server role or the Edge Transport server role installed. The following scenarios may cause a Hub Transport server or an Edge Transport server that has an independent message database to stop responding.

Additionally, you cannot re-enable the server online. . To perform the following procedures, the account you use must be delegated the following. To perform the following procedures on a computer that has the Edge Transport server role installed, you must be logged on with an account that is a member of the local Administrators group on that computer.

Why the device may freeze

But if some failure occurs during an emergency update or recovery of the device, then your gadget will face an eternal reboot. It looks like this: the device tries to turn on, but at a certain moment it encounters an error in the operating system and cannot overcome it; this problem causes the device to automatically switch to recovery mode. If in this situation you try to take the device out of DFU Mode, it will start to boot, again encounter an error and, accordingly, return to DFU Mode again. This cycle is called the “Recovery Loop.”

If you want to perform tasks on the queue database and its associated files, move the queue database to the target server, or perform offline repair and defragmentation, ensure that you are assigned permissions from the following list for the directory in which the queue database is located.

Network service: Full accessSystem: Full accessAdministrators: Full access. If one of the following conditions is true, this may result in unwanted behavior during message transmission. Messages waiting to be delivered to a mailbox delivery queue can now be delivered through a remote delivery queue. Addresses that were previously remote addresses can now be local addresses and vice versa. There may be messages in the unavailable queue. You may need to retransmit messages manually using the categorization module.

The following situations may cause the above problem:

Incorrectly loaded firmware. If the iTunes program files were damaged or not updated to the latest version, or the Internet connection was lost during the download process, then iOS for your phone or tablet may not download correctly.
The restore or update process was interrupted before it was complete. The USB cable may have been removed too early, or the device may have run out of charge too soon.
If you tried to downgrade the device's firmware version, this could also cause a recovery loop to occur.
Perhaps the device itself was damaged: the error was hidden in the operating system, or the insides of the phone or tablet had physical flaws.

How to enter iPhone or iPad into DFU Mode

To get started, connect your phone or tablet to your computer using a USB cable and disconnect it, and then use one of the methods below to enter DFU Mode.

The following are the basic steps to restore the queue database. The queue database consists of the following files. The transaction log consists of the following files. Move the entire queue database and transaction log files to a temporary directory on the Hub Transport or Edge Transport destination server.

Through special programs

This can be done at any time after you have finished copying the queue database files to the destination transport server. In the section. The recovery process reads the checkpoint file and commits untranslatable transactions from the transaction log to the queue database. If there is no checkpoint file, the import starts with the oldest log file entry available in the transaction log.

How to switch to mode by holding the Home+Power buttons

Navigate by alternately pressing the “Lock” and “Home” buttons

The result for both options should be a message from iTunes on the computer screen, which states that a device is connected to the computer that is subject to forced recovery. Remember that nothing should be displayed on the phone or tablet screen, there should only be a black, solid color screen throughout the entire process.

Size of database files. Stop delivery of new messages in the queue and allow delivery of existing messages. Monitor mailbox delivery queues and remote delivery queues until all messages are delivered. Resume or export messages that will be stored in unprocessed message queues. Wait until the server has a delivery queue to hold more messages. To resume messages in the raw message queue, do one of the following: In the queue viewer, select the raw message queue, select the message, and select Resume in the action bar. If one of the following conditions is true, you must increase the message interval interval: The queue database that you want to recover has been offline for more than two days. The queue database did not complete delivery of messages within two days after it was restored. This is indicated by message number 0. . This prevents messages from being deleted immediately after the queue database has started, or when a recently started database has sent its old messages.

Device detected in recovery mode

Withdrawing iPhone, iPad, iPod touch from DFU

If the device is not in an eternal reboot and no errors occurred during the recovery or update process, then a simple reboot will help: pick up your tablet or phone and hold the Home and Lock buttons for 10 seconds. Done, the device will automatically restart and return to normal operation.

Press the button combination

Through special programs

If your device is in a so-called “recovery loop”, that is, after each reboot it returns to DFU mode on its own, then there is only one thing left to do - use third-party computer programs that will help deal with the problem.

TinyUmbrella

RedSnow

Video: how to take a device out of the recovery loop using RedSnow

RecBoot

What to do if you can’t exit DFU mode

If using the programs described above did not help, then there is only one thing left to do - try restoring again through iTunes. But this time everything must go without errors, otherwise the problem will not be solved. Before starting the operation, charge the device to 60–100% so that the process is not interrupted at the most inopportune moment.

Quitting DFU - step by step steps

If none of the above methods helped you, including re-flashing via iTunes, then there is only one thing left to do - take the device to a service center to get help from a qualified specialist. It is possible that the insides of the gadget were damaged, in which case you will have to pay extra and replace them with new ones, of course, if the warranty on the device has already expired. But before you take your phone to the nearest service center, contact Apple support, they may be able to give you the right advice on how best to proceed in this situation - https://support.apple.com/ru-ru.

So, the device can be put into DFU Mode to perform a forced recovery or firmware update. But if this process is interrupted or carried out incorrectly, the phone or tablet can go into eternal recovery mode, returning to DFU Mode time after time after a reboot. In this case, a regular reboot, third-party programs, or re-flashing in compliance with all the rules can help you. If all else fails, contact Apple support and the official device repair service.

What is DFU Mode for and how to enter it?

Why the device may freeze

The following situations may cause the above problem:

Incorrectly loaded firmware. If the iTunes program files were damaged or not updated to the latest version, or the Internet connection was lost during the download process, then iOS for your phone or tablet may not download correctly.
The restore or update process was interrupted before it was complete. The USB cable may have been removed too early, or the device may have run out of charge too soon.
If you tried to downgrade the device's firmware version, this could also cause a recovery loop to occur.
Perhaps the device itself was damaged: the error was hidden in the operating system, or the insides of the phone or tablet had physical flaws.

How to enter iPhone or iPad into DFU Mode

To get started, connect your phone or tablet to your computer using a USB cable and disconnect it, and then use one of the methods below to enter DFU Mode.

How to switch to mode by holding the Home+Power buttons

Navigate by alternately pressing the “Lock” and “Home” buttons

Withdrawing iPhone, iPad, iPod touch from DFU

Through special programs

TinyUmbrella

We connect the computer to the device using a USB cable.
Download and install the program from the developer’s official website - http://blog.firmwareumbrella.com. The site has installer files for both Windows and Mac OS.
Switch your device to DFU Mode. Instructions describing this process are found above in the same article.
Wait until the program detects your phone or tablet in recovery mode and the Fix Recovery button becomes active. Click on it.
You will be asked if you really want to fix the recovery process. Confirm the action. After this, wait a while, the device should turn on automatically in normal mode.
The process of exiting the recovery loop is complete, but it is worth considering two more useful buttons of the program you are using. The first is Enter Recovery, which allows you to put the device into DFU Mode without using buttons. May be useful if the physical buttons are faulty.
The second button is Exit Recovery, which allows you to exit recovery mode without using the device buttons. But this method only works if the device is not in an eternal reboot loop.