Step 1. Specify for yourself the parameters of your provider - an Internet service provider, which will need to be entered on the router configuration page:
- On what Protocol your operator provides you with the Internet ( PPTP, L2TP, PPPoE - Static or Dynamic);
- Automatically or manually your PC is assigned an IP address and DNS;
- Is access available through Login and password;
- Is there a binding network card PC to the operator's server by physical address (MAC address).
Step 2 In connection properties local network, in properties Internet Protocol Version 4 (TCP/IPv4), if you see numbers, they should be rewritten in a notepad, and then set automatic tuning IP addresses, masks, gateway and DNS from the provider:
- Start - Control Panel - Network Connections or Network and Control Center and public access- Change adapter settings - Local Area Connection - click right click properties:
Step 3Physical adress can be found by right clicking on the icon:
- Local Area Connections - Status - Details - In the window, in the list, the third line is Physical Address
Let's start configuring the router (router)
Turn on the router, insert the cable from the operator into the connector INTERNET, we connect with a cable (usually supplied as a kit) the network cards of the router (LAN 1 connector) and the PC (Ethernet network card connector). The router should light up at least power diodes (PWR), active first port and WLAN ( AIR), although it happens that the latter is disabled in the router settings. Before setting up, we recommend that you full reset router, for a long time, for 10 seconds, hold the button in the hole behind reset.
Setting wireless router RT-G32
Step 1. Launch on PC Internet Explorer(default, Internet Explorer , but can also be Mozilla Firefox, Google Chrome, Apple Safari or Opera). In the address bar, specify the IP address of the router, which, as a rule, is indicated on the bottom of the router: http://192.168.1.1
To enter the router configurator, use Username, usually, admin and Password – admin, but it is better to clarify the information on the bottom of the router or in the user manual.
Step 2 If your provider provides you Static IP address and 192.168.1.1 , which matches the IP address of the router, in this case, enter the router in the section " LAN» and change the IP address of the router to 192.168.100.1 , then press " Apply"and reboot the router:
Step 3 After changing the address, you can proceed to the basic configuration of the router. On the page under " WAN» Select the Protocol of your operator from the list and specify the parameters of the IP address WAN:
As shown in Figure 6, you can change the network name default to whatever you like. Choose encryption to protect home network from connecting inquisitive neighbors :) WPA-PSK TKIP is a strong encryption that will keep us safe. It remains to come up with and enter a password in the field " WPA preshared key”, memorize it and write it down in a notebook.
Step 6 Click " Apply”, after applying the network settings, click“, then“ Exit»
At the end of the reboot, our router is ready for service.
WHEN SETTING UP THE WIRELESS NETWORK, PLEASE NOTE!
- We recommend changing the Wi-Fi signal broadcasting channel from automatic selection to a specific one, for example, 6 or 9 .
- To achieve the maximum speed of data exchange over the network, do not use encryption types
If you are wondering how to connect an ASUS router to a computer, and how you can set it up, then this article is for you. First, to make the connection, you will need a special cable called a patch cord. Usually, this cable comes with a router, it serves to connect a computer and a modem, if the connection has been made, in the network connection settings it is worth checking whether there is access to the network.
First step - Network connection and its setting.
You need to go to "Network and Sharing Management", for this we go to the Start menu, and there we select "Control Panel". It is there that the corresponding section will be, which we need when you are in it, you need to find the connection that is active, and right-click on it, go to the "Status" tab.
When a new window appears, select "Properties", and there find an item such as "Internet Protocol version 4 (TCP / IPv4) 2" and go to its "Properties". Naturally, after that, you immediately need to go directly to the settings, you don’t need to do a lot of manipulations here, it’s enough to automatically put a bird in front of each item with a value.
If this was the standard, then you don’t need to make any adjustments, just leave everything in its place, close all windows, and go to the second step in setting up your router.
The second step is to connect the cable from the router to the computer.
Looking at the device from the back, you can see on it such connectors as LAN (yellow), WAN (blue), Power (black). You need to connect the power supply to the Power connector, the patch cord that comes with the device is inserted into the LAN port (the other end of the wire is inserted into the computer), but you need to connect the cable coming from your Internet provider to the WAN port.
The third stage is setting up the modem.
In order to continue configuring the modem, you need to launch a browser, and in address bar type in 192.168.1.1 and press the ENTER key. After that, a page will open where you need to enter your login and access password. By default, they are set as "admin", "admin".
If this is your first time entering this panel from your computer, then a similar dialog box will pop up in front of you.
If you click on the "Home Page" button, you will automatically be taken to the main page, in which you will need to select the control panel interface language and set up a wired connection. If this is not done, then wireless connection set it up won't work. To get started, you need to go to the tab with the name WAN and select "Internet connection" there.
Now we proceed directly to setting up our Internet.
In the connection type, select the item with the name - PPTP.
Opposite point - DNS setup WAN”, you need to check the “no” position, because these settings will need to be filled in on your own, for this you will have to call the provider, being interested in this data.
The account block should contain information about the Internet login and its password. This information should have been provided to you by the Internet provider when concluding the contract.
We apply all the actions, and we get a ready-made, workable Internet connection.
The fourth point is setting up a wireless connection.
Due to the fact that working with an Internet connection via a cable is not very convenient, technology such as “Wi-Fi” was developed long ago, it allows you to access the Internet without a cable, for this reason, this is called “Wireless Internet Connection”. ". Now, we will do small manipulations that allow you to configure wireless transmission data.
On the home page control panel, select the item with the name "Wireless Networks". Next, go to the tab called "General", and there you will need to fill in the data with pens. SSID field - requires the name of the network. You can choose absolutely any name, because it comes from your brain. Now you need to take care of protecting the created network. To do this, in the "Authentication Method" item, you must specify a setting called "WPA-2 Personal". Encryption type can be selected both combined and AES. Next, enter the password that will be requested when connecting to wireless connection. It is necessary to set a password that will also be reliable, but you must never forget it, otherwise you will not be able to connect to your own network, and you will have to reset the settings to factory settings.
After doing these steps, the setting ends, you need to save the result, for this we click on the "Apply" button, it is located at the bottom of the page. After that, we reboot the modem, and make sure that everything works correctly. We advise you to check the performance not only on a computer, but, for example, on a phone, tablet, and so on. The setup process is not difficult, and even a beginner can do it.
The RT-G32 router allows you to create up to four WiFi networks simultaneously. As in other models of Asus routers, the connection is configured through a web interface that can be opened in any browser. A large number of changeable parameters and speed wireless network up to 150 Mbps make Asus RT-G32 suitable not only for home but also for office use.
Entering the router settings
The standard IP address where you can access the Asus RT-G32 control panel through a browser is 192.168.1.1. For authorization, you will need to specify the username and password of the router. By default, this is admin/admin, but if someone has already configured the router before, they could change this data. In this case, it is recommended to clarify the new login and password with the person who set up the device.
Advice! If there is no way to find out the changed parameters account, use a factory reset. It is done by long pressing the "Reset" button on the back of the router.
The control panel home page contains a menu, a quick network map, and access to rapid change basic settings. With them you can:
- Change SSID (WiFi name).
- Restrict top speed WiFi.
- Enable or disable the radio module.
Changing Internet settings on RT-G32
To configure the Internet, open the "WAN" tab in the left menu. At this stage, it is desirable to have access to information about your connection, which is provided by the provider. Depending on the technology used, this may include an IP address, subnet mask, DNS server addresses, and account login information.
Select the type of WAN connection from the first dropdown list. When using IPTV, mark the port to which the equipment is connected to ensure the operation of digital television. It is recommended to leave the "Enable UPnP" option unchanged (value "Yes"). It simplifies the addition of new network clients.
For automatic connection to domain name servers, select the "Yes" option in the corresponding item. Enter the IP of the primary and backup DNS servers below. Specify account information if the type of connection you are using requires it. The remaining settings of the Asus RT-G32 router for a specific provider can be specified on the website of the company providing Internet access.
Note! As DNS servers, you can use the addresses of Google Public DNS or Yandex DNS services.
Tutorial video: Some nuances of setting up Asus RT-G32
Advanced Router Options
You can configure WiFi on the Asus RT-G32 router in the "Wireless Network" tab. In the SSID field, enter the desired wireless network name. The network can be made hidden by checking the "Hide SSID" box. As an encryption method, the choice of the protocol "WPA2-Personal", type "AES" is optimal. WiFi password specified in the "WPA Preshared Key" line.
class="eliadunit">
How to setup asus router RT-G32 on one's own. Bought this model after reading an article in Computer Bild #25 November 2011, the router is actually said to be good, but there were problems connecting it. We have two computers: stationary system unit and laptop. We want both machines to have internet. We connect a local Internet cable to the WAN port on the router, then connect the LAN port of the router and a simple computer with a network cable, the Internet immediately appears on it. Next, we go into the wireless network settings of the router and connect it to the laptop via Wi-Fi, but nothing happens. Our Internet provider is Beeline, they called there and they answered us that they don’t work with such a model, they advised us to contact Asus technical support, they got through with great difficulty and the most interesting, the answer was: - “Call your provider in Beeline, only there will be able to tell the exact settings of our router.”! We called Beeline, where they advised us to change our router to another one and sent us a list of devices they work with by SMS, Asus is also there, by the way, but a different model. How to proceed? Evgeniy.
How to set up an Asus RT-G32 router
If you wish, friends, you can set up any router, since they all work according to the same principle, but if you don’t want to mess with the settings, then of course you can call your provider and inform your intentions to purchase a router. If we take Beeline for example, they always have both inexpensive models and branded ones, and of course they will undoubtedly help with the settings, they have good technical support, and there are discounts before the holidays. Well, we are with you, let's help configure router Asus RT-G32 to our reader. And we will help the person, and the experience gained by ourselves will not hurt. By the way, we have a new article: Setting up a D-Link DIR-300 NRU router, you can read it.
We didn’t have this router model at our company, I had to take it from our gullible neighbors for one day, I came home and decided to check everything myself, by the way, I also have a Beeline provider. As usual, let's start from the very beginning, so that configure router Asus RT-G32 we do everything right.
The main window of the router settings appears. Asus RT-G32. First of all, we set up access to the Internet through a router on simple computer. Let's go to settings WAN, it really depends a lot on your ISP.
My WAN connection type L2TP I explain why.
If the Internet connection is made using technology VPN, and you can find out in the connection properties Start-Control Panel-Network and Internet-Network and Sharing Center- Adapter settings changes,
then go to the connection properties of the provider, in my case Beeline, we need the Security tab and see the type here VPN, we have it L2TP. So in the WAN settings of our router we specify L2TP.
Port selection IPTV STB, choose our port LAN-1.
Setting the WAN IP address automatically? Again we go to the Network and Sharing Center and look in the properties already local connection. In my case Automatically.
Server Heart Beat PPTP/L2TP(VPN) we also look in the properties of the connections of our provider, for example, I have tp.internet.beeline.ru. We press the button Apply and you will have the Internet on your desktop computer.
