You can talk about the benefits of GPS on a smartphone for a long time, so we will not do this. But recall that GPS is not only accurate (well, almost) localization and routes to anywhere, but also a lot of mobile applications, which literally cannot live without data about your location and constant tracking of your movements (often extremely intrusive), and which, in addition to this, actively “eat” the smartphone’s battery.
In general, GPS on the iPhone is needed, but sometimes it would be nice to turn it off.
Another thing is that most users are not able to really turn off GPS on the iPhone. Everyone is doing how? They simply activate the flight mode, in which the wireless modules of the smartphone do not seem to work.
In flight mode, the iPhone cannot send signals (as is commonly believed) that could interfere with aircraft electronics, but the GPS receiver is a passive radio, that is, it only receives signals and, unlike WiFI, 3G, LTE and Bluetooth, does not broadcast anything . However, in this mode, the GPS on the iPhone does not turn off, and all sorts of programs take advantage of this. Of course, without a smartphone connected to the Internet, it is not so easy for them to determine your coordinates, but any navigation application with an offline maps function will use GPS, as they say, to its fullest.
But if there are switches for other wireless modules in the iPhone (in the Control Center), then you will not find such a switch for GPS, so turning off GPS on the iPhone is not so easy. What if you need to turn it off? Well, for example, to save battery charge.
So, to completely disable GPS on the iPhone, do the following:
- to start, go to Settings ", further - in" privacy where we find Location Services «;
- tap on the switch located next to it and move it to the “ Off ”(it will turn gray from green).
Everything! You were able to disable GPS on iPhone.
Now all applications installed on your smartphone, including Apple Maps, will not be able (at least officially) to use your location data.
But you also have the option to turn off GPS on the iPhone not for all wholesale programs, but only for some. To do this, go to the section Location Services » settings applications, we see the list and in it we disable access to GPS only for certain programs.
By tapping on the slider, you will see a small menu in which, for some applications, you can choose to turn off GPS modes. " Never " means that the application should not use the GPS in your iPhone at all, " When using the program » — GPS is activated only if the application is active, « Is always "- GPS is used by the program all the time, if you have not disabled it in the way described above for all applications.
As everyone knows, Apple releases two versions of its iPad tablet, and this is the version with just Wi-Fi, and the version with Wi-Fi and 3G module. Also, the second version of the iPad also has one very interesting and useful feature. And that function is GPS.
GPS is satellite system navigation, which allows us to determine our location and the speed with which we are moving in any part of the Earth.
iPad as a GPS navigator
As mentioned above, the iPad Wi-Fi + 3G version has a built-in GPS signal receiver. And accordingly, we can use it for navigation, whether it's a walk through the unfamiliar streets of a small town, or car navigation through a large metropolis. Also, if you use the iPad as your personal business assistant and often travel on business trips, it will be very convenient to find any address in an unfamiliar city. With a 9.7 inch screen and good autonomy for these functions, it is almost perfect.
Yes, indeed using the iPad as GPS navigator I am very glad. Being in a car that is moving at a speed of about 100 km / h, the iPad finds satellites in just a few seconds, while accurately determining the coordinates. Well, it already depends more on the programs you use for GPS navigation and the cards they contain.
iPad. GPS and bluetooth
Theoretically, you can make GPS for a regular iPad Wi-fi. On foreign forums, I often came across the fact that a person bought bluetooth gps - connected it to his iPad “with a tambourine” and he had a working GPS on a regular iPad WiFi. In practice, two of my friends tried to do this, but the iPad did not want to work in conjunction with bluetooth GPS. It also needs certain models that the Apple tablet is ready to accept.
With the advent of the global detecting system (Global Positioning System), the range of tasks to be solved has changed radically modern devices and high tech devices. We are talking about searching, tracking moving and stationary objects using satellite communications and global telecommunications. Geolocation technology is still widely used in many areas of human life. Including, GPS is available to every user of Apple devices, anyone can turn it on and off on an iPhone.
What is GPS
Global Positioning System or simply GPS is a positioning system that is designed to determine the location of objects, both moving and stationary. GPS is based on the reception / transmission of information to communication satellites that send the exact coordinates of the object according to the position in the network. This technology has long been used in many mobile devices, simplifies the tasks of orientation and coordination in space.
All modern smartphones have built-in GPS receivers, so one of their features is the constant binding to the terrain. On the Apple devices this technology is implemented in the geolocation complex. The built-in GPS module. The speed of transferring geodata and the accuracy of determining coordinates is improving with each new smartphone model.
Applications that use geolocation
Advanced Google Search
Google is a very convenient and reliable search service for absolutely any information on the web. This service is considered the most popular among users, including Apple technology. essence Google programs consists in processing, analyzing requests (including voice ones) in order to give out as much information as possible related to these requests.
To search for specific places, addresses, shops, etc. Google search engine uses GPS signals and geolocation. So, it determines the routes, the nearest stores or companies to the user, the speed and travel time, as far as driving a car is concerned.
On Apple devices, many applications have a built-in link to the user's location. This built-in feature expands the range of application tasks to be solved, improves the quality of service and maintenance by application developers. Next, I would like to give an overview of several popular programs from the AppStore, based on the work of the geolocation of the device.
2GIS
The 2GIS program is a convenient complex navigator with many functions and convenient options. The city map loaded from the program server to the device already contains data on all addresses, shopping malls, places and public transport routes. User interface helps to quickly calculate the correct and most convenient route, choose from a list of addresses united by one topic (food, hotels, dental offices, for example) the only one you need.
The program also contains all the necessary information about institutions: opening hours, photos, reviews and nearby metro stations. 2GIS works without an internet connection, which makes it even easier to work with. The user's location is monitored by the program constantly, with high accuracy (access to geolocation in the application can be prohibited, this will not cause it to lose its functionality).
2GIS will help the user quickly navigate the city, spend a minimum of time on the road and simply choose the most suitable place to relax in the evening.
It is available for free in the AppStore, supports many languages, and has an extensive database of cities.
Another popular Yandex Maps application works on the same principle. The main difference from the 2GIS program is that the program does not have the ability to work offline. And this shortcoming is quite significant.
The program has high user ratings. Bases of addresses, data on organizations are updated every month.
Yandex Transport
The Yandex Transport program was originally created for those who travel around the city by public transport every day. Those who want to save their time and not be late, for example, for an important meeting, can easily track any bus on the selected route in real time.
The program interface differs little from its analogue programs, however, the peculiarity of Yandex Transport is that not a single similar program does not track the position of buses and trams, the time of their arrival at the stop and the estimated travel time.
The program uses GPS technology at its core: the installed GPS points in the cabin of each bus and tram send a signal to the general GPS network, which is processed by the Yandex Transport application, linking the coordinates of the bus to the city map. (The position of the device on the map is displayed in the same way).
The application is available for free in the AppStore, suitable for use on iPhone, iPad, iPod.
Uber Taxi
The application was created for people who regularly use taxi services. It brings together both customers and drivers. Uber simplifies the work of drivers in finding order addresses, and the client can at any time see where the driver is, how long it takes him to get to the desired address, which route is chosen for movement.
The program includes a link to bank card user, so it is not necessary to pay the fare in cash. BUT bonus program Uber will be a nice addition.
The application automatically calculates the cost of the trip at a given rate (Uber includes several rates, depending on the brand of the car and the time spent on the road).
It is available for free at App Store. When registering a new user, the profile is linked to his phone number and email.
Placer
This application uses the GPS and geolocation function in a different way. Often, users are happy to share their feedback about the time spent in a particular institution, be it a restaurant, cafe or cinema. Someone spends time in nature or outside the city and also shares their feedback, leaves comments.
The program is easy to use, supports Instagram, Facebook and other popular resources. Presented in free version for iOS.
How to enable and disable geolocation on iPhone
The geolocation option on the iPhone has both positives and negatives. Its plus is that it increases the functionality of the smartphone and simplifies the work with maps, orientation and transport programs. But long work Geolocation enabled consumes much more battery power than many other applications in the system. Turning off geolocation on iPhone if necessary is very simple.
Disabling and enabling geolocation occurs in the smartphone settings. Privacy tab in many versions operating system replaced with "Privacy".
Then, in the "Location Services" tab, switch the toggle switch to the "Off" position (or "on" for the reverse action, having previously confirmed our intention).
When searching for a network and the geolocation mode is on, the corresponding icon in the form of an arrow will be located in the upper right corner.
The Location Services tab contains a list of applications that use this feature. You can disable or allow the application access to GPS data in passive mode here.
At the very bottom of the list of applications is the "System Services" tab. This is a list designed for flexible geolocation settings in special, system applications.
The system services presented above can be disabled at the request of the user. They represent services for forwarding statistical data to Apple in order to select exactly the right necessary information for the user, which will be relevant at that moment. For example, this applies to advertising that will be sent to the user or displayed in the browser. In addition to keeping statistics, the Soma company selects a certain set of advertisements by subject, based on the user's preference for being in a particular place.
Note that geolocation is not available on non-SIM iPods and iPads.
Video: how to enable GPS on iPhone
Calibration of the watch according to a given time zone, setting up a cellular network and a compass: all of these components depend on the work of the geolocation of the phone. At the request of the user, system services can be disabled. Then almost no data about the location of the device will be transmitted to the network. With the exception of information related to mobile communication: Identification of subscribers in the network, and its physical position is recorded permanently.
Find iPhone
Among the applications and options that work with the geolocation of the phone, there is one special. This program is Find My iPhone. With it, you can find a lost device, knowing the password from your account. When you enter the correct password on another device, the program itself transmits information to the GPS network, contacts the lost iPhone, marks its location on the map. The convenience of the program lies in the fact that it shows the best path to the location of the device.
If you lost your phone indoors, then when you search for it using the application, a loud speaker will be activated on the device sound signal, with which the phone will be easy to find.
Using the app is pretty easy. It is enough to execute the following algorithm:
- download the application from the App Store;
- authorization in the program using your account data;
- after analyzing the data, the application will issue a map, where the location of the devices will be indicated in detail;
The main thing to remember is that this feature must be activated in advance. Otherwise, at the moment when the program is really needed, few will be able to help.
Problems with geolocation
The absence of a GPS signal can rarely be explained by a hardware failure. That is, business, as a rule, not in iron. More often the reason lies in the software component. Or the user did not take into account the previous settings, as well as incorrectly configured geolocation services.
The signal may not accurately convey the location of the device. This happens most often because of the massive walls of the building, because of the terrain or heavy clouds. All those factors that degrade the signal can bring down the accuracy of the programs.
Geolocation work can be interrupted due to the installation of unknown and dubious applications. This may be a game that the user downloads, bypassing official stores or trusted sites, which uses the geolocation of the phone to work. Due to its work, geolocation starts to work incorrectly in other applications. It is possible that the program is hidden, or the influence comes from outside. Then you should reset all settings and try restarting the service. In many cases, this is an effective way.
If all of the above actions do not help, then the phone should be taken to the service. Specialists often have to solve problems of this kind. But it also happens that restarting geolocation or resetting network settings helps restore correct work geolocation.
Quite a lot of information enters the network while using the "geolocation" option. For the most part, all information is transmitted confidentially, but sometimes the user may not know that he is under surveillance from the outside. This problem worries many. But this is where the inconvenience of the GPS system built into Apple smartphones ends. Many useful daily programs accompanies us wherever we are and wherever we go.
The correct use of geolocation will help to spend a minimum amount of time on solving many problems.
Today we will look at how to enable geolocation on an iPhone 5s (for example) and related services that ensure the smooth operation of the device, as well as programs for collecting and processing confidential information.
To answer the question “Where to enable geolocation on an iPhone”, we will try to figure out what the meaning of this function is and to whom it will be useful.
Many of us do not know how to turn on the location search service on iPhone, and also do not know how to turn it off. There is nothing difficult in this. Read the contents of the manual carefully and choose the most suitable solution for your problem.
Location Services on iPhone. What are they and why are they useful?
Geolocation in iPhone is an integral part of your device. They allow you to track your location throughout the day. It all depends on the settings, which are quite flexible functional interface. One of the most striking examples is the search for the most convenient restaurant or cafe for you, the nearest taxi, car sharing machine, as well as a free hotel room.
Most of the services that determine the location of you and your iPhone in particular are easily configured through standard settings. To set up geolocations on the iPhone, Apple allocates a whole menu item in which you can enable or disable items that use location data, including system services.
You must understand perfectly. The more apps that use your location data, the faster iPhone battery dissipates and deteriorates over time. That is why the flexible setting of geolocations in the iPhone is so important, which we will tell you in more detail below.
How to turn on the location service on iPhone?
To answer this question, we should find the location of geolocations in the iPhone settings. Go to "Settings" - "Privacy" - "Location Services".
You can customize each application as you wish. We advise you to understand in detail the services and applications or games that you use most often. Flexible settings can significantly save your iPhone's battery.
To enable the service for determining the approximate location of the iPhone, check the slider shifted to the right. In the case of a properly working tracking, the slider will be green, as shown in the screenshot.
For reference! Enable geolocation on iPhone 6 or newer iPhone models 7 You will not be difficult. Our instruction is universal and created on an updated version software– iOS 11.
How to set up geolocation on iPhone?
The needs of the applications that users install on their devices are different from others. That is why we cannot say exactly what you should enable or disable in the location data settings. But, we will try to provide detailed information about system location data so that you can make the most informed decision when turning various features on or off.
To set up geolocation on an iPhone, go to the "Location Services" menu item, which you already know from the previous step of the instruction. Scroll down the list of suggested options. Go to System Services. It will also allow you to answer one of the most popular questions: “Geolocation in iPhone, where can I find it?”.
To determine the location of a person or an iPhone, you should carefully prepare the geolocation settings. This is necessary so that no one else except you can change the GPS settings or completely disable the Find My iPhone tracking services.
You should introduce restrictions on the use of settings in the menu of your iPhone. Go to "Settings" - "General" - "Restrictions". Enter in advance set passcode. Scroll through the restrictions settings to the "Privacy" - "Location Services" section.
Make sure that Location Services is turned on and that the Restrictions checkbox is set to "Prohibit changes". Also, before imposing restrictions on prevent changes, we advise you to check the settings of the Find My iPhone function. The settings should match those shown in the screenshot. The introduction of such changes in the geolocation settings will help answer the main question "How to determine the location of an iPhone."
If you did everything right, now, except for you and the person who knows the access code, no one can turn off location services on the iPhone. They will simply be "Inactive".
How to find a person by iPhone geolocation from a computer?
It is very easy to do this. Go to the official Apple website.
If you are doing this for the first time, you will have to go through two-factor authorization on your computer and allow account icloud trust the browser. So let's go to the site. We enter the login, i.e. email address and password. The computer will display information about two-factor authentication as shown in the screenshot below.
At this time, on the iPhone, a pop-up window with a city map asks you for permission to access your account. Click Allow and enter the six-digit authorization code (on PC) that appears on the iPhone display.
After passing two-factor authentication, the following question will appear on the computer: "Trust this browser?". If you are going to determine the location of the iPhone with home computer, feel free to click "Trust"
Then you will be taken to the main icloud menu. It looks like this:
To locate your iPhone from your computer, click Find My iPhone. If you carefully read the previous settings item, you will see a map of the current location of you or your device.
Do not forget that when you search for an iPhone, the device will display a running geolocation service if you have not disabled it in the settings. Thus, you can discreetly determine the location of a person on an iPhone or vice versa.
Find iPhone through computer if it is turned off. Is it possible?
This is possible, but the search system will give you a previously noticed address that was attached to your account. Ultimately, it turns out that the Find My iPhone function will display the last registered address of the location of your device on the map. If the iCloud server fails to contact the iPhone, the map dot or location marker will be greyed out.
If you have any questions, we will be happy to answer them in the comments. Our instructions for setting up and determining the location of the device will fit under any iPhone on iOS >11.
Benefits realized in iPhone features GPS cannot be overestimated - it makes it easier and easier to get to your destination using a software navigator, it is indispensable when playing Pokémon GO and allows applications to track the user's location. However, like any other system, GPS can fail.
In contact with
Why did GPS on iPhone suddenly stop working?
The most common problems with GPS are:
- No GPS signal;
- GPS does not update current location;
- GPS shows wrong location;
- The compass points in the wrong direction;
- Applications cannot determine the current location.
Of course, the list could go on and on, depending on how and where you use your iPhone. In addition, problems may occur due to applications that use the GPS function in different ways. Sometimes the error message does not appear at all, which makes it much more difficult to find and fix the cause of the problem.
Check if apps have permission to use location services
Very often, users simply forget to activate the Geolocation function in applications. For example, you won't be able to see your location on Maps or other mapping services unless the app has been given permission to use the location feature.
To check if the apps have the appropriate permission, go to Settings –> Confidentiality –> Location Services.
You can prevent certain apps from using location services. You can also allow applications to receive location data always or only while they are running (including in the background).
Please note that some applications require permission to always use location services. If you select the option to receive data only when the program is open, the GPS function will not work correctly. Make sure that the correct settings are set for each application.
Turn Location Services off and on again
Sometimes the cause of problems with the GPS function is just a small glitch in the software. In this case, you need to disable and re-enable location services. To do this, you need to go to Settings –> Confidentiality –> Location Services and move the switch to the left and then right again.
You can also turn all wireless services off and on by deactivating and reactivating Airplane Mode in Control Center.
