MMS cannot be sent from iPhone 4. How to set up MMS on your device: a few steps

The MMS function is supported by many modern models phones. The ability to send multimedia messages allows users mobile phones share with each other your impressions of a vacation, a walk, wish you a great mood along with a beautiful melody or an interesting picture. This function is now actively used by those subscribers who own older models. cell phones. Also multimedia messages convenient when it is not possible to use more modern methods of transmitting information - Wi-Fi and WhatsApp.

The question of how to set up MMS is asked by subscribers of all existing operators. The system for setting up the function of sending multimedia messages is approximately the same for all operators. In order to be absolutely sure that the function will become available and can be used, you must complete all possible settings, which include the following three steps:

Step 1 - you need to activate the service;
Step 2 - configure account;
Step 3 - Check your phone settings manually.

Let's look at the features of connecting to the service and setting up an account within each mobile network. Step 3, which includes setting up the device manually, will be considered separately - it does not depend on the operator.

Setting up MMS on Tele2

The question of how to set up MMS on Tele2 will be resolved after you select any of the methods listed below:

After completing the necessary steps, the service will be connected and account settings will be activated.

Setting up MMS on MTS

MTS users can also set up MMS automatically. In order to connect the service and activate the necessary settings, you need to choose the method that is most suitable and convenient for you:

Make a call to number 0876.
Send a free message with the text “MMS” to number 1234.
Dial command *111*18#.
Use an assistant.

The settings received in the SMS message must be saved on your device.

Setting up MMS on Beeline

The question of how to set up MMS on a phone whose operator is BeeLine can be solved in very simple and quick ways: The 1st method is to connect to a service called “Pack of three services”, which includes WAP/GPRS/MMS. You can do this by dialing *110*181# and the call key on your phone. This way you will connect the service and activate your account settings. 2nd method - activate the service in your personal account.

Setting up MMS on Megafon

Megafon has provided subscribers with ample opportunities to manage their phone settings.

Therefore, the question of how to set up MMS on a phone with a Megafon SIM card is not a problem. Choose the method that is most convenient for you:

Send an SMS with the number 3 to number 5049.
Use the self-government service *105#, where then send request 6 (Settings) - then 1 (Phone settings) - and 1 (MMS).
Order settings on the company website.

Setting up your phone manually

This step must be completed in order to no longer hesitate and be confident that multimedia messages will be sent from your phone without unnecessary snags. It consists of several actions:

In the phone menu, find the “Settings” (“Options”) tab, then “Configuration”.
Check the MMS message configuration settings:

access point in Tele2 - mms.tele2.ru, in MTS - mms.mts.ru, in Beeline - mms.beeline.ru, in Megafon - mms;
the username in MTS and Beeline is the name of the company in small Latin letters, in Tele2 it is absent, in Megafon it is mms;
the password in MTS and Beeline is the same as in the username, in Tele2 it is missing, in Megafon it is mms;
authentication type - select “normal”.

Next steps:

Enable the new account as the default account.
Reboot your device.
To register your number on the network as an MMS user, you need to send a multimedia message to your phone after turning on the phone

Setting up MMS on iPhone

The question of how to set up MMS on iPhone can be resolved by performing several manual steps.

1. Order a service:

MegaFon operator - send an SMS with the text “gprs” to number 000890;
Beeline operator - call 067409181;
MTS operator - send an SMS with the text “GPRS ON” to short number 0016;
Tele2 operator - make a call to toll free number 693.

2. Connect the device to a PC with Internet access and the iTunes application running. Agree with the offer “Download updated settings" If there is no offer, it means that the service is configured or is not supported by the operator.

3. In the phone menu, open the “Settings” tab, then go to “General”, select “Network”, go to the “ Cellular network».

Enter the required values:

Access point (APN): MTS operator - mms.mts.ru, Beeline - mms.beeline.ru, Tele2 - mms.tele2.ru, Megafon - mms.
The username in Beeline and MTS is the company name in small Latin letters; in Megafon and Tele2 it is absent.
Password - similar to username.
MMSC: operator Tele2 - http://mmsc:tele2.ru, Beeline, MTS, Megafon.
MMS proxy: Beeline operator - 192.168.94.23:8080, Megafon - 10.10.10.10:8080, MTS - 192.168.192.192:8080, Tele2 - 193.12.40.65:8080.
The maximum size is 512000.

Here it is done setting up MMS on your device. Enjoy the service!

Reading time: 10 minutes

In this article, I will look at the reasons why the iPhone does not send or receive MMC and what to do in this case to solve the problem.

This article is suitable for everyone iPhone models 11/Xs(r)/X/8/7/6 and Plus on iOS 13. Older versions may have different or missing menu options and hardware support listed in this article.

Setting up iPhone to send MMS

To enable MMS on iPhone, go to “Settings” - “Messages”. There, activate the corresponding toggle switch. As a rule, MMS is configured automatically and no connection parameters are required.

Increase

After that, turn on the transmission in the settings cellular communication. Make sure your mobile network is working by opening a web page, for example. To complete activation successfully, it is advisable to restart your iPhone. To do this, hold side button and swipe from left to right on the pop-up menu. Then turn on the device.

Ask your question to a specialist

Don’t know how to solve a problem with your gadget and need expert advice?

Increase

Reasons why MMS does not send

If you have problems sending MMS, the first thing you should check is whether your operator provides the transfer of such messages. This feature may be paid and not enabled automatically. To check the availability of MMS, you can contact the operator or go to personal account on the website or in a proprietary application. Typically, this setting is displayed in the list of connected services.

Increase

If MMS are not being sent, try the following steps:

Make sure MMS parameters are set automatically. To do this, follow the path “Settings” - “Cellular Communications” - “Data Settings” - “Cellular Data Network”. The APN, username and password must be entered there. The appropriate values for these parameters should be obtained from the operator. For example, for Beeline it is: , beeline and beeline, respectively.

Increase

Conflict with iMessage. MMS may not be sent due to the fact that your interlocutor has an iOS device. This is easy to understand by the color of the windows: they turn blue, not green. In this case, transmission via iMessage is used. If you do not use it, you should disable this feature. Open “Settings” and select “Messages”. Consider what kind of repeat iMessage activation the operator may charge a fee.

Increase

Send the message as MMS. In continuation of the previous point, it is worth noting that a message already sent via iMessage can be transmitted in the usual way. To do this, hold down the message you need and in the window that appears, select “Send as SMS/MMS.

Increase

Disable LTE. MMS messages may not work correctly in an LTE network. To disable them, go to “Settings” - “Cellular” - “Data Options” - “Voice and Data”.

Increase

Hardware problem. Restart your iPhone and try removing the SIM card and putting it back in.
Reset your network settings. There may be some kind of software glitch in the iPhone due to which the connection does not work correctly with MMS. To reset your network settings, go to “Settings” - “General” - “Reset”.

First you will need to activate MMS in the settings. To do this, go to the “Messages” section and find the “MMS messages” item there. It must be activated.

You also need to activate cellular data. To do this, find the “Cellular” item in the settings and make sure that the slider opposite “Cellular Data” is moved to the right.

Each operator has its own MMS settings. They may have already been entered automatically when you first inserted the SIM card into your iPhone 6s. If for some reason this does not happen, the data will need to be entered manually in the “Cellular Communications” section. Find out the settings in technical support or on the official website.

After you have entered the data, you need to restart your smartphone - only then will the changes take effect. Send a test MMS message to one of your contacts or to your operator's toll-free number.

Possible problems with MMS on iPhone 6s

You seem to understand how to enable MMS on iPhone 6s and did everything according to the instructions, but MMS messages are still not sent? Let's try to solve the problem.

First of all, you should try removing the SIM card and inserting it again. Perhaps the problem will resolve itself after this.
You may not have installed the latest iOS version. Perhaps the problem is related to some errors on Apple's part, and they solved them in latest version OS.
MMS worked, but stopped after updating the firmware - then turn off the smartphone, let it sit for 15-20 seconds and turn it on again. You may need to re-enter your settings.
Sometimes MMS are not friendly with LTE. Go to “Settings” - “Cellular” - “Voice and Data”, switch to 3G. After sending MMS, you can turn on 4G again.

If you are sending an MMS to an iPhone user, the media file will persistently be sent via iMessage. If you don't need it, disable the service in the settings.

If none of this helps set up MMS on iPhone 6s, contact your operator. Most likely, there was some mistake on his part.

Apple has tried to simplify the process of setting up its products as much as possible, so one click is all it takes to activate many settings on your smartphone and tablet.

First, you need to try to enable the MMS function on your iPhone by going to the message settings. The MMS Messages option must be enabled. The same thing needs to be done with the Cellular Data option in the iPhone's Cellular settings. The smartphone must have Internet access. To check this, just turn on Wi-Fi, find a suitable network and open any of the addresses in your browser.

The next step is to reboot your smartphone. Turn off the gadget, remove and reinsert the SIM card, and then turn on the device. Check if MMS function works on iPhone. If you still can’t send the message, you should reset your network settings.

In order to restore normal operation of the gadget, you need to go to the main settings of your smartphone and find the “Reset” option. After which you need to reset your network settings. And turn off the gadget again, take out and insert the SIM card into the phone and try to send MMS to the iPhone.

If messages are still not sent, you need to check with your telecom operator whether your MMS service is activated.

MMS messages are sent directly from messages. Just click on the camera icon, take or select the desired photo from existing photos on your phone. At the same time, the problem of sending MMS to iPhone when all parameters are properly configured can be explained by the large weight of the photo or the inappropriate image format. To do this, you need to open the photo in full screen and take a screenshot of it, then the photo will appear in the album and will be fully available for sending.

How to set up MMS service on iPhone 6? It won’t be difficult to do it if you know a few nuances. The article describes in detail all the necessary steps for this using the example of connecting an operator service mobile communications MTS.

MMS settings

First you need to enable MMS service on a smartphone. To do this, open the “Messages” tab in “Settings” and then find the MMS item. In it, use the switch to turn on the MMC, and it will turn green.

Then you need to turn it on "Cellular data transfer", because without the Internet MMS will not be sent.

Debugging data transfer in a phone for the mobile operator MTS

Debugging process mobile internet iPhone 6 is a little more difficult. You are required to enter a proxy address, password, login, etc.

You need to open “Settings”, then go to the “Basic” tab, then to “Network” and click on "Cellular data network" and enable this option.

In order for the Internet service to work, you need to enter the settings from MTS manually once in iPhone 6 (they are on the official website of the MTS operator).

The following table shows the parameters required to be entered:

APN: mms.mts.ru
Name: mts
Password: mts
MMSC MMSC: http://mmsc
MMS proxy 192.168.192.192:8080
Leave port empty
Message size no more than: 512000
MCC Skip
MNC Skip

Open Settings;
Open the “Phone” tab;
Click on the line “My number”;
Print the SIM card number;
Reboot your device.

Everything should now work!

In case of incorrect operation

If MMS are not sent after the completed actions, it is recommended to reset the network settings. To do this, go to the main menu of the iPhone 6 and open “Settings”. Next, in the “Basic” item, go to the “Reset” menu. Activate network settings reset and wait until the action is completed. Then reboot the device, remove and reinsert the SIM card. Now everything should work correctly.

Attention! A reset will only erase the user’s network data, but all information will be retained. You just need to configure everything yourself again.

Problems while sending MMS messages

Sending failures often occur on the iPhone 6, even in cases of correct settings and successful operation of the MMS function earlier. The cause of this problem is the lack of timely updating and outdated software smartphone. It is recommended to check for firmware updates before installing any applications.

Often, after updating the software on the iPhone 6, MMS stops being sent altogether, and it is not possible to change settings due to the loss of activity of the MMS key. In this case, sometimes turning off the iPhone and then turning it back on after one minute helps.

Usually not correct work MMS service happens at mobile operator MTS. In this case, it is recommended to enter three x (xxx) in the APN column in the above settings, the remaining fields remain the same.

Then you need to send an SMS to 8890, and the MMS service will be activated.

Sometimes the MMC function does not work due to LTE activity, even with the correct settings. You need to turn on 3G, and everything will work immediately. To switch, you need to open “Settings” and click on the line "Voices and Data" switch to 3G.

After sending the MMS, you can switch to LTE again using the reverse steps in the “Settings” window.

Also, a simple action often helps to set up sending MMS on an iPhone - “pull out and reinsert the SIM card.”

It happens that iMessage persistently interferes with the process of sending MMS, and MMS functions are not used iPhone smartphone 6. In this case, you need to touch and hold the iMessage message until a menu appears with a recommendation to send via MMS. If this action does not work, you need to disable Apple iMessage. To do this, open “Settings”, then in the “Messages” tab, use the appropriate slider to disable the proprietary application. You need to check that the slider in the MMC line is green.