Firmware for HTC One M7? How to flash htc one m7, and where to download the firmware? Download firmware for htc gt m7 phone.

Complete Guide on the firmware of the HTC One (m7) smartphone, installing ClockworkMod recovery, unlocking Bootloader and installing custom firmware.

1. Download files for working with adb and fastboot and the driver for connecting the phone to a PC HTC Driver 4.8.0.002 You will almost always need them.

2. Unpack the archive into the c:\android folder. There should be 4 files in the folder

3. Connect your smartphone to your computer using the original usb cable (the one that came with your smartphone)

4. Install drivers (downloaded early ones). The smartphone should be identified as MyHTC in the computer's device manager

5. Now let’s learn more about unlocking the bootloader on HTC One (m7)

You need to unlock the bootloader on your HTC One (m7) phone

Important! The Unlock Bootloader process will reset the phone to factory condition!

Select the “All Other Supported Models” section from the list and click “Begin Unlock BootLoader”

Agree to all the terms and conditions and go to the manual page (the “Unlocking Bootloader Instructions” key).

Put your smartphone into fastboot mode (to bootloader): turn off your smartphone by pressing the Power key and hold until it reboots, then release Power and immediately press Volume Down (-) and hold until you enter the bootloader (bootloader)

Check how the smartphone is detected in the device manager. You need MyHTC.

Launch a terminal. In the c:\android folder, while holding down the Shift button, right-click anywhere and select - Open command window. The command line will open and it will say c:\android>

IN command line type the command fastboot oem get_identifier_token

Select and copy the text (right-click, select Mark, press Enter) as shown in step 9 on the HTCDev website

Paste "My Device Identifier Token:" into the form on htcdev.com and click Submit (step 10)

Through time to your email, specified by you during registration, you will receive a notification with the attached file Unlock_code.bin. Download it and save it in the c:\android folder

At the command prompt, enter fastboot flash unlocktoken Unlock_code.bin

A menu with Unlock bootloader should appear on your phone. Select Yes (volume rocker) and press the Power key.

The smartphone will reboot. Ready!

To be sure that the bootloader is unlocked, reboot the phone into the bootloader and the message *** UNLOCKED *** should appear in the bottom corner of the display, which indicates a successful unlocking process bootloader HTC One

6. Installing custom recovery (in this case CWM)

Download custom recovery and rename it to recovery. img. (It doesn’t make much difference which recovery to install. Often firmware developers advise installing a specific recovery) for example, this one - recovery.zip If you downloaded a zip archive, then you need to remove the recovery.img file from there

Place the file you downloaded in the same folder as Android files, that is C:\Android

Put your smartphone into fastboot mode and enter this code in the command line:

fastboot flash recovery recovery.img

fastboot erase cache

Recovery has been successfully installed on the smartphone. In order to enter recovery you need to put your smartphone into fastboot mode, use the volume keys to select Bootloader and press the Power key, then select Recovery and press the Power key again

7. Download any firmware you need (you can download - firmware for HTC One (m7)) and place it in the smartphone’s memory; for convenience, it is better to put it in the root folder (so that you will have to search for it less in the future). If this is firmware based on CyanogenMod, then you also need to download Gapps - a Google application ( Play Market etc.). You can take them

8. Reboot into recovery

9. Then make a backup of the existing firmware. Why do you need to select the Backup section in recovery: in CWM - Backup and Restore/Backup, in TWRP - Backup. It is better to save the resulting backup on your computer, since in the future it will be necessary to return to the initial state (especially relevant for “rare” smartphones)*

10. Do wipes, that is, bring them back to factory appearance.

In CWM - Wipe data/factory reset, wipe cache partition, Advanced/Wipe dalvik cache. In TWRP - Wipe, swipe to execute. You can manually select partitions to clean: Dalvik Cache, Cache, Data, System. To do this, click Advanced Wipe.

11. Install the firmware. In CWM - Install zip from Sdcard → Choose zip from sdcard → select the downloaded firmware → confirm. In TWRP - Install → select the downloaded firmware → confirm.

12. Everything is ready! The firmware will be installed! If you chose firmware based on CyanogenMod, then you need to install Gapps - just like the firmware

13. Reboot the device

It is much more convenient to reboot into recovery or bootloader using the ADB** command (enter on the command line):

1. adb reboot recovery - to reboot into recovery

2.adb reboot bootloader- to reboot into the bootloader

Well, that’s all, your smartphone with an unlocked bootloader will be flashed to the new firmware.

They will be needed almost constantly.
2. Unpack the archive into the c:\ folder. There should be 4 files in the folder

3. Connect the phone to the PC using the original usb cable(the one that came with the phone)
4. Install the drivers (downloaded earlier). The phone in the PC device manager should be identified as MyHTC

5. Now let’s learn more about how to unlock the bootloader on One (m7)

We need to unlock the bootloader on One smartphone(m7)

attention! The Unlock Bootloader procedure will reset your smartphone to factory settings!

Select “All Other Supported Models” from the list and click “Begin Unlock BootLoader”

We agree with all the conditions and go to the page with the instructions (the “Unlocking Bootloader Instructions” button).

We put the phone into fastboot mode (into the bootloader): turn off the phone by pressing the Power button and holding until it starts to reboot, then release Power and immediately press Volume Down (-) and hold until you get into the bootloader (bootloader)
We check how the phone is identified in the device manager. Must be MyHTC.
Let's launch the terminal. In the c:\ folder, while holding down the Shift key, press right click mouse anywhere and select Open command window. The command line will open, which should read c:\android>

On the command line, type the command fastboot oem get_identifier_token

Select and copy the text (right-click, select Mark, press Enter) as shown in step 9 on the HTCDev website

Paste “My Device Identifier Token:” into the form on htcdev.com and click Submit (Step 10)
After some time, a letter will be sent to your mailbox specified during registration with the Unlock_code.bin file attached. Download it and save it in the c:\android folder

In the command line enter fastboot flash unlocktoken Unlock_code.bin
A menu with Unlock bootloader should appear on your smartphone. Select Yes (with the volume rocker) and press the Power button.

The phone will reboot. Ready!
To make sure that the bootloader is unlocked, reboot the smartphone into the bootloader and the message *** UNLOCKED *** should appear in the top corner of the screen, which indicates a successful unlocking procedure for the bootloader HTC One

6. Installing custom recovery on HTC One (m7) (in our case CWM)

Download custom recovery and rename it to recovery.img. (It doesn’t make much difference which recovery to install. Sometimes firmware developers recommend installing a specific recovery) for example, this one - recovery.zip If you downloaded a zip archive, then you need to extract the recovery.img file from there
Place the file you downloaded in the same folder where the Android files are located, that is, C:\Android
We put the phone into fastboot mode and enter this code on the command line:

fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot

Recovery was successfully installed on HTC One (m7). In order to enter recovery you need to put the phone in fastboot mode, use the volume buttons to select Bootloader and press the Power button, then select Recovery and press the Power button again

7. Download any firmware you like (you can download it here - firmware for HTC One (m7)) and place it in the phone’s memory; for convenience, it’s better to put it in the root folder (so that you’ll have to search for it less later). If this is firmware based on CyanogenMod, then you also need to download Gapps - Google applications (Play Market, etc.). You can take them
8. Reboot into recovery
9. Next, we make a backup of the existing firmware. To do this, in recovery you need to select the Backup item: in CWM - Backup and Restore/Backup, in TWRP - Backup. It is better to save the resulting backup on your PC, as it will be useful in the future for returning to initial state(especially relevant for “rare” phones)*
10. We do wipes, that is, bringing them to the factory state.
In CWM - Wipe data/factory reset, wipe cache partition, Advanced/Wipe dalvik cache. In TWRP - Wipe, swipe to execute. You can manually select items to clean: Dalvik Cache, Cache, Data, System. To do this, click Advanced Wipe.
11. Installing firmware. In CWM - Install zip from Sdcard -> Choose zip from sdcard -> select the downloaded firmware -> confirm. In TWRP - Install -> select the downloaded firmware -> confirm
12. Done! The firmware will be installed! If you chose firmware based on CyanogenMod, then you need to install Gapps next - just like the firmware
13. Reboot the device

It is much more convenient to reboot into recovery or bootloader using ADB** commands (enter on the command line):
1. adb reboot recovery - to reboot into recovery
2. adb reboot bootloader - to reboot into the bootloader

Well, something like that. Your HTC One (m7) phone has an unlocked bootloader and is flashed with new firmware, good luck with your use.

How to flash HTC One (m7)

Full instructions on flashing HTC One (m7) phone, unlocking Bootloader, installing ClockworkMod recovery and custom firmware.

1. Download files for working with adb and fastboot and the driver for connecting the smartphone with the PC HTC Driver 4.8.0.002 They will be needed almost constantly.
2. Unpack the archive into the c:\android folder. There should be 4 files in the folder

3. Connect the phone to the PC using the original USB cable (the one that came with the phone)
4. Install the drivers (downloaded earlier). The phone in the PC device manager should be identified as MyHTC

5. Now let’s learn more about how to unlock the bootloader on HTC One (m7)

We need to unlock the bootloader on HTC smartphone One (m7)

attention! The Unlock Bootloader procedure will reset your smartphone to factory settings!

Select “All Other Supported Models” from the list and click “Begin Unlock BootLoader”

We agree with all the conditions and go to the page with the instructions (the “Unlocking Bootloader Instructions” button).

We put the phone into fastboot mode (into the bootloader): turn off the phone by pressing the Power button and holding until it starts to reboot, then release Power and immediately press Volume Down (-) and hold until you get into the bootloader (bootloader)
We check how the phone is identified in the device manager. Must be MyHTC.
Let's launch the terminal. In the c:\android folder, while holding down the Shift key, right-click anywhere and select Open command window. The command line will open, which should read c:\android>

On the command line, type the command fastboot oem get_identifier_token

Select and copy the text (right-click, select Mark, press Enter) as shown in step 9 on the HTCDev website

In the command line enter fastboot flash unlocktoken Unlock_code.bin
A menu with Unlock bootloader should appear on your smartphone. Select Yes (with the volume rocker) and press the Power button.

6. Installing custom recovery on HTC One (m7) (in our case CWM)

fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot

7. Download any firmware you like (you can download it here - firmware for HTC One (m7)) and place it in the phone's memory; for convenience, it is better to put it in the root folder (so that you will have to search for it less later). If this is firmware based on CyanogenMod, then you also need to download Gapps - Google applications (Play Market, etc.). You can take them
8. Reboot into recovery
9. Next, we make a backup of the existing firmware. To do this, in recovery you need to select the Backup item: in CWM - Backup and Restore/Backup, in TWRP - Backup. It is better to save the resulting backup on your PC, as it will be useful in the future for returning to its original state (especially important for “rare” phones)*
10. We do wipes, that is, bringing them to the factory state.
In CWM – Wipe data/factory reset, wipe cache partition, Advanced/Wipe dalvik cache. In TWRP - Wipe, swipe to perform. You can manually select items to clean: Dalvik Cache, Cache, Data, System. To do this, click Advanced Wipe.
11. Installing firmware. In CWM – Install zip from Sdcard -> Choose zip from sdcard -> select the downloaded firmware -> confirm. In TWRP – Install -> select the downloaded firmware -> confirm
12. Done! The firmware will be installed! If you chose firmware based on CyanogenMod, then you need to install Gapps next - just like the firmware
13. Reboot the device

As usual, the main attention of developers is drawn to themselves by new, more powerful smartphones. Your HTC One M7 is just like that. I found at least 20 of the most different versions software. They all have their pros and cons, and based on the description it is impossible to choose the one that is one hundred percent right for you. To begin with, I will provide a list of, in my opinion, the most interesting firmware, and only then I will describe the procedure for installing them on your smartphone. All firmware is unofficial, and therefore the user is entirely responsible for their installation. Also, the firmware of an unofficial version entails the cancellation of the manufacturer’s warranty and service obligations.

Google Play Edition (4.4.2) http://d-h.st/AQb. Fundamentally new firmware from Google. I won’t tell you once again how high-quality products it produces this company. This one was created on Android based 4.4.2., one of the very first.
Google Play Edition (Lollipop) https://www.androidfilehost.com/?fid=95832962473398291. There are advanced system settings, open autorun, and optimized operation RAM. Very good set applications already installed in the firmware, so after installation you will spend time mainly only on restoring your own data.
Android 4.4.4 KTU84P.H1 https://www.androidfilehost.com/?fid=23501681358555860. The manufacturer recommends complete cleaning systems from foreign files and old firmware files before installation new system. It’s also very nice that it is updated! It works stably, problems with the radio module have been fixed.
SkyDragon Google Play Edition v6.0.0 (L 5.0.1) https://www.androidfilehost.com/?fid=95851939534733845. Another firmware from Google. Works 100 percent stable. Completely new kernel firmware has been installed. Loading optimization has been carried out. Pre-installed programs with huge functionality.
Android 4.4.3 KTU84L.H4 https://www.androidfilehost.com/?fid=23501681358549229. The developers approached the issue from a slightly different angle. Instead of doing new product on the old basis, they brought it to mind official version firmware. Everything works, loads quickly, applications, in my opinion, began to load twice as fast.
Official CM12 http://download.cyanogenmod.com/?device=m7. The manufacturer talks about possible, but not confirmed problems with the operation of the radio. Otherwise everything works. Animation without microfreezes, there is a video call, battery consumption is noticeably reduced.
MoDaCo.SWITCH basedAndroid 4.2.2. http://loadbalancing.modaco.com/download.php?file=SWITCH.Beta13.fresh.zip. In this firmware, the developer claims very serious battery savings. Sense 5 installed. The graphics are very different from its predecessors for the better.

After you have secured your data, you need to proceed to unlocking the phone's bootloader. Download any firmware you need, you can download firmware for HTC O 7 here and place it in the smartphone’s memory, it’s better to install it for convenience. In the window that opens, check the USB M box and use a cable to connect the HTC O M7 801E to the computer. For you on the topic: HTC O D firmware

HTC O M as custom firmware, install custom recovery and flash root. You can see the new one on them. If such HTC ONE M7 D SIM is coming soon, then on your official firmware, when connected to the Internet, it will recognize a message about the availability of new software. Instead of making a new product on an old basis, they brought to life the official version of the firmware

How to flash HTC O 7. How to Flash HTC O M7 with Official Firmware How to flash HTC O M7 Download any firmware you need, you can download here firmware for HTC O 7 and place it in the smartphone’s memory, for convenience it is better to install a Backup of the official HTC ONE M7 in CWM I S C select the downloaded one. Remember that replacing official software with any other one deprives you of official, free service from the manufacturer's plant. You can only flash the official RUU firmware

Unlocking the bootloader and obtaining R rights on the A E P T TF300 tablet deprives. How to flash HTC O M7. Firmware for mobile devices, among which are official and. Characteristics and discussion of the HTC O smartphone running 4

Download any firmware you need, you can download here firmware for HTC O 7 and place it in the smartphone’s memory; for convenience, it is better to put it in the root folder so that you will have to search for it less in the future. How to flash HTC O 7 Complete instructions for flashing HTC O 7 phone, unlocking B, installing CM recovery and custom firmware. How to flash 7 official firmware. Updating HTC phones HTC O M7 update and firmware