Unfortunately, the Lightning cable from Apple does not last forever; sooner or later it will fail. If this has already happened, then you are probably thinking about what cables are suitable to replace the original one, maybe you should choose something cheaper, but how can you be sure of the quality of the cord. What if a low-quality cable damages Apple technology, after all, you can’t recklessly buy the first Chinese cord you come across.
Here we will look at what the best offers for cable products exist today, compare price-quality positions, taking into account the fact that the cable should be ideal for iPad Apple, even if it is not original. It's no secret that it happens that the iPad does not charge even from a non-original cable.
We agree that the choice is not easy when a real cable costs from 1500-2000 rubles, and a non-original one can be purchased, for example, for no more than 500 rubles. Let's try to find out why the original cord is so expensive and whether the original cable can be replaced with a non-original, but high-quality and cheap one.
Initially, the right to Lightning, in particular its connector, was assigned to Apple , therefore, other serious companies cannot produce their own products using the same connector without special permission from the author. These are the laws of business. If any company uses such technology in its products, it will be forced to pay Apple a bribe of $4 for each cable. This also comes down to price, since a certified cord should not cost less than $4.
As we have already said, there are both certified and non-certified cables or counterfeits on sale. good quality. But the fact is that Apple took this point into account and built a special chip into the Lightning connector, which acts as an authenticator, and if an uncertified product is installed, it stops charging, so a corresponding entry appears on the screen of your Apple device: “an uncertified accessory is connected "
This way the company limits the possibility of using low-quality products in its equipment. On the one hand, this is of course good, there are fewer problems with the iPad, but on the other hand, what kind of solution does exist? So, let's take a closer look at cable products.
Counterfeits of the original cable
The Apple MFI cord is familiar to everyone; it is quite dense and rigid, about a meter long. Unfortunately, this product is often found on eBay as a counterfeit at a price of three dollars apiece, and its packaging may look like the original, while its real price is about $19.
An advanced Aliexpress store will offer you a cheap analog for just 400-500 rubles. But what is distinctive is that the cable does not look so rigid and is relatively thin and flat. You can find unpleasant burrs on its surface. The cables are available in different colors and are standard one meter long.
An interesting option is the KALUOS cable, which is distributed in all online stores. His appearance looks reassuring: itself is quite thick and rigid with an aluminum connector, creating the appearance of a cable excellent quality. Moreover, the cord has two colors: gold and silver, and the length reaches up to 1.5 meters. The price, in turn, is around 3 dollars.
A good analogue is the Belkin cable, which is not inferior in rigidity and thickness to the original one, however, it also has many fakes. If the price for the original cord is about $19, then on Internet sites it is sold from two to ten dollars. At the same time, Lightning itself -the connector accurately reflects the original. What distinguishes the original from a fake is only its price and often its length, which is slightly longer than that of the real thing.
Another popular power cord with Lightning The connector is Nillkin cable , which is made quite high quality, there is a code on the packaging with secret password for original verification. Externally it is massive, while flat, but flexible. There is a special strap on the cord itself that allows you to lay the cord neatly. Its length is more than a meter, and it is made in different colors.
Price on Aliexpress starts from four and a half dollars. However, it is disappointing that such a brand is not in the Apple certified database, so, unfortunately, it is difficult to guarantee its quality, although in practice it has proven itself very well.
It is worth noting another worthy, but unnamed product, only 23 cm long, which differs from all others in that it simultaneously has three of the most popular connectors: Lightning, USB and Apple 30-pin. The outside of the tee can be made of fabric and also have backlight properties. At the same time, it has medium rigidity, it can even be classified as flexible, and accordingly it is a fairly thick cord.
A meter-long Lightning cord labeled Blaze has become a popular product on the digital technology market. Sellers pass it off as original and guarantee 100% quality. Unfortunately, it is not on the list of those certified by the company, but it looks very similar to the original. If you look closely, you can see differences in the cord, for example, in the fact that it is a little thin in appearance.
As for the fairly common types of cheap fakes, the price for which is one dollar or less, for example, in the popular online store Aliexpress, of course no one will guarantee their quality, because the price speaks for itself. However, it is precisely the price factor that plays a significant role in sales and, judging by their volumes, they exceed fifty thousand, which is why such products always have a high sales rating.
Appearance of such Lightning -the cords are quite similar to the original, but still the connector looks very rough, the cord itself has a thin appearance, there are ugly burrs on the connectors along the edges, their length can vary from one to two meters. The price for such cables in Moscow ranges from 200 to 500 rubles.
Certified cables
Unlike cheap counterfeits for $2-4, you can purchase a relatively inexpensive, but certified MFi - Lemfo cable one meter long. In addition, it completely coincides with the original in all respects. It is distinguished from the original only by the marking “lemfo”. For this identical template they are asking eight to ten dollars.
In the same pricing policy there is another analogue high quality- a two-meter, or even five-meter long cable with a Lightning connector, quite thick and at the same time quite flexible YourCharger cable . However, the downside of this cable is that it can charge and connect to Apple products, but it cannot synchronize data between devices, which makes buying a cable half useless.
The certified analogue of Snowkids, which is deservedly appreciated by many customers, is presented with a strong and thick cord 1.3 meters long. The rigidity of the cable is quite high, and the connectors look weighty. The price varies around eight to ten dollars. Of course, you can buy it much cheaper in China, but on the domestic market it is a worthy economical ally of the original.
There is a worthy successor in the Apple certified product database - an MFi cord marked “ESK” . Externally, in design and length, it completely coincides with the “apple” original. There are no logos on it, including the standard one for Apple records"Designed by Apple... ". But the most important thing is that the price for it is two times lower and is 10 dollars. You can buy it on the Chinese JD site.
I would like to point out one more thing high level LG cable that has a micro-USB connector, but comes with a small adapter to Lightning . By the way, such adapters also come in either certified or not.
Conclusions
As we can see, the variety of certified and non-certified products with a Lightning connector offered is quite large, since only a fraction of the cables offered by Chinese manufacturers are listed here. Without testing, one can only understand the quality of such products superficially. What are the dangers of using a low-quality cable when using an iPad?
The fact is that if you use an uncertified device in your work, your iPad may simply not accept it and such a purchase will become useless. And the second dangerous reason is the possibility of the iPad breaking due to the wrong voltage level entering it, since one creator knows what voltage a cheap Chinese cable conducts, so if the current exceeds, you can damage your tablet forever.
If you are ready to take a risk and buy a non-certified, but recommended Lightning cable, then you should remember some connection features. In particular, when, when connecting the cord, the entry “ This cable not certified...”, close this window and unlock your iPad, if the recording window appears again, then also click the “Close” button. Next, disconnect the cable and turn it on again, but do not perform any other actions with the tablet. This way, the device should see the cord and start charging. If you see that there is still no charging, then repeat the procedure again.
A broken charging cable is the bane of every phone. The most important thing is to find a replacement in time. However, it is not always possible to fork out for an original iPhone. Fortunately, non-branded analogues are common. But to use them, you still need to try.
The problem is that Apple is a very self-centered company. Therefore, if users should buy something, it should only be with their logo. And thanks to this policy, iPhone in its program code has some interesting lines. They forbid him to use a cable that is not produced by the parent company. And the cost of a real accessory from Apple is quite high. But the proprietary cord contains a special chip, which the device must analyze in order to work.
How to charge an iPhone with a non-original wire
But despite all Apple’s tricks, you can still use a non-native USB cable. Although you will have to suffer a little each time for this. So, a list of actions that need to be carried out so that your iPhone still “eats” the non-original plug and starts charging:
- Connect the charger with the cable inserted into it into the outlet.
- Take the wire plug and insert it into the smartphone. The latter must be blocked.
- A warning will appear that you need to close. To do this, you need to pull it to the side.
- Only after this - unlock the device.
- Reject everything the iPhone complains about again.
- Without blocking the device, remove the cable plug from the Lightning socket and immediately return it to its place.
- And again, reject all the windows with which the miracle of Apple technology will notify you.
After this simple list of actions, the device should begin to receive energy.
Is it safe to charge with a non-original cable?
Such manipulations using a cheap cable, which for some reason is still not equipped with a normal chip (for example, like wires from Remax), can be very expensive for its users. Relatively new iPhones 5 among all their hardware have a small but very unpleasant module. It is almost invisible to the eye, but it can really ruin your life.
This little rascal is called U2 IC. It analyzes which cable is currently being used with the smartphone. And if for some reason he doesn’t like this cord, it simply breaks. And if this chip breaks, you will have to either get rid of the iPhone or repair it.
What problem does it cause? It's simple. Without an adequately functioning U2 IC, the device is unable to receive power. Even if it regularly enters the gadget, it does not reach the battery. As a rule, the owners think that the battery is damaged, and then they go to change it. But this doesn't help - as soon as new battery will discharge to zero, more smartphone will show no signs of life.
So what should we do?
Use only high-quality non-original iPhone cables! All manufacturers who respect themselves and their name have long been aware of which chip inside the plug is responsible for initialization in the device. And they even learned to fake it. And therefore, you should not take Chinese “noname” wires from the nearest kiosk. They are certainly cheap and available. But won't it be more expensive to repair your mobile phone later?
It’s better to spend a little money and buy an accessory that is a little more expensive than a Chinese one, but still cheaper than the original one. There is plenty to do in this area. Many manufacturers offer their services:
- company . There is no need to even doubt this - this company, according to assurances, is certified by Apple themselves. Consequently, your gadget will not suffer from the use of wires purchased with this brand;
- firm . Their products attract attention; it is impossible to pass by such a wonderful purchase. Their big bonus is that they don't stop at boring monochromatic cables. The Remax assortment includes dozens of the most different wiring. In the catalog you will find everything, even fabric-braided data cables, which remain operational longer than regular ones;
- manufacturer named . Severe and solid models for mobile phones, which will not become a problem for the user. They are produced with a leather braid, which is more reliable than even fabric. There is no need to talk about quality - it definitely exists. Not a single gadget, according to user reviews, failed while Just was working with it.
“This cable or accessory is not certified...” is a message that you may not have encountered personally, but you have definitely heard about it. We all know how short-lived original lighting from Apple is and how expensive they are. Buying a cable not from the manufacturer is fraught with unpleasant consequences. They usually find out about them when it is too late. What to do if you find yourself in similar situation? How to charge your pet? And why might such an alert occur if everything was fine up to this point?
Why do users buy replicas?
The purpose of buying a copy cable is clear - the desire to save money. The Chinese-made analogue is cheaper than Apple products. At the same time, a scary message with the text “This cable or accessory is not certified” sometimes does not appear immediately. Someone may have a question: how exactly does the phone recognize that the connected cord is not “native”?
The bottom line is that a special component is installed in this original lighting - a microcontroller. One of its functions is to ensure that the charging and data transfer process can occur no matter which side you insert the cable into. Chinese replicas most likely do not have this microcontroller. Alternatively, it is damaged or simply does not meet the phone's requirements. Because of this, problems subsequently arise.
What problems might arise from using such a cable?
As you can see, Apple strictly monitors the use of products not made by itself. Special devices do not allow charging; a message appears on the screen stating that this cable or accessory is not certified, so the reliability of its operation is not guaranteed.
Of course, one of the main reasons for this phenomenon is the monopoly on production. But the representatives themselves name another, no less significant one: a fake cable is almost guaranteed to cause serious harm to your iPhone. Firstly, if you use a Chinese replica, the Apple phone may simply stop charging and connecting to the computer. As a rule, at the most inopportune moment. Secondly, the original lighting is designed specifically for iPhone. Using a fake may damage the Apple phone due to technical inconsistencies. Then your losses will be much more serious than the cost of buying a new cable.
A simple method that can make a non-original cable work
Let's say a phone, on the screen of which a message appears that this cable or accessory is not certified, does not charge. What should you do if you can’t find a replacement cable right now, but you definitely need to charge your phone? No one gives a 100% guarantee, but sometimes this method helps:
- First, try inserting the cable the other way.
- If all else fails and the same message appears on the screen, close it.
- Unlock your phone and the alert will pop up again. Close it again.
- Unplug the wire and then immediately plug it back in.
- In some cases, after this, charging begins to occur as usual.
How to charge a device with a copy by turning off the phone?
Another simple option on how you can try to make a non-original cable work:
- Connect the wire to the device. A warning will appear on the screen. But you shouldn't pay attention and take out the cable.
- Turn off your phone. At the same time, make sure that lighting remains connected.
- If this method is suitable for your phone, the charging process will begin. A disconnected device cannot check the cable and “notice” that it is a copy.
This cable or accessory is not certified: how to bypass it via jailbreak?
This cable or accessory is not certified... Solve this problem You can also use jailbreak. The algorithm of actions is as follows:
- Jailbreak your phone.
- Launch Cydia and go to the Sources tab.
- Here you should find the item Support Unsupported Accessories 8. It is this modification that is responsible for activating support for non-original devices.
- This tweak is absolutely free. Feel free to click “Install”.
- After rebooting the device, the changes made should take effect.
Now when you connect the charger, the process should occur without problems. The message may still appear. However, this will not affect the result.
What to do if a problem with a lace appears out of nowhere?
A gadget that displays the notification “This cable or accessory is not certified” is not charging? What to do if yesterday you attached the same cord, and everything was fine? And are you sure of the noble origin of your cable? There may be several reasons:
- Over time, any equipment deteriorates. The charger connector may have become oxidized or dirty. Carry out a visual inspection. Dirt can be removed with any stick, but use sharp iron objects! This will only make the problem worse.
- Assess the condition of the wire itself. A message indicating that this cable or accessory is not certified may even appear from original model if it is damaged. The most weak points- points of articulation. Minor damage can be repaired. But if the shell is seriously damaged, there is only one way - to the store.
Now, if the message “This cable or accessory is not certified” appears on the screen, you already know what to do. But it’s still better not to skimp. Therefore, advises you to buy original lighting. Otherwise, the consequences may be more serious than just a dead phone. Then the iPhone will have to be taken to a service center, which will entail even greater expenses than purchasing the original cable. It’s better to allocate a certain amount and buy the necessary lace than to pay twice later. By the way, the new cable can be further strengthened. Then it will last much longer.
What to do if the wire does not charge your iPhone
Hello! There is one more problem on the current agenda. What to do (or not do) when your iPhone won't charge? In this article we will look at the probable prerequisites for this and try to find a solution for each of them. BYPASSING PASSWORD IN iOS 10 or what to do if you forgot. So, if your iPhone has finished charging, sit back and read until the very end... I'm sure one of the tips below will help you.
As you have already figured out, there are more than several circumstances why an iPhone may not charge. Below I have collected the most common of them. Let's start with the most “harmless” ones, and then move on to the “cardinal” ones... Follow the stated order, and every time try to implement what you read. I'm sure some of the tips will definitely help you charge your iPhone.
- Is it safe to charge your iPhone using an iPad charger? - read in this article
- Is your iPhone draining abnormally fast? There is a solution! - read in this article
Reason #0: Software (firmware) glitch
Believe it or not, almost always the reason for an iPhone not charging lies in the software (firmware), and not in the hardware. If the iPhone doesn't work anymore Question: The iPhone turned off and won't turn on, what should I do? If you didn’t know, there is a controller inside the iPhone (a chip on a board) that is responsible for charging the battery. What to do if frozen Xiaomi Redmi 4 Pro and does not respond. This controller works under the guidance software. Thus, when you connect the cord to the iPhone, power is supplied not directly to the battery, but first to the board with the controller, which in turn obeys the program built into the phone.
What can we do? And the fact is that the software component of the iPhone recognizes when a power source is connected to the phone and gives a command to the controller to start charging. If the software is frozen, no command will be issued and your iPhone will not charge.
To solve this problem, a hard reboot of the device usually helps. To do this, simultaneously press Home buttons and Power for at least 30 seconds.
- If you need to reboot your iPhone X or 8, read this article
- More detailed information By reboot iPhone- can be found here
Reason #1: Lightning port is dirty
80% of the population carries their phones in their pants or trouser pockets... I don’t know about you, but I regularly clean out all kinds of garbage from my jeans pockets... where does it come from? Moreover, this garbage (dust, lint, hair, etc.) tries to sneak into every crevice of my iPhone.
Imagine! This is the first reason why the iPhone may not charge. You can’t even imagine how much lint and dust gets into the Lightning charging connector! The accumulated compressed dust does not allow the Lightning plug to fit properly into the connector hole, which leads to the problem above. Don't believe me?
Try this! Take a wooden toothpick and gently clean out any accumulated debris from the Lightning connector. What to do if it doesn’t charge, you need to try charging the phone using another one. In this article I will tell you what to do if the iPhone does not charge, but shows that it is charging, I will describe the reasons for this problem. Try to “pick out” charging holes from both corners. Proceed with extreme caution to avoid damaging the contacts. You will be shocked when you see how much “felt” we managed to get. After that, blow out the connector and connect the charger. What to do if your iPhone won't charge. If the phone is very low, it may take up to 15 minutes before it shows the first signs of life.
Reason #2: USB port is faulty
If you are trying to charge your iPhone from USB port Well, the first thing you should do is check if it works. At my work Windows laptop there are a couple USB connectors, from which the iPhone does not charge at all. I don’t know what this is connected with, but the phone does not receive a charge. It seems that 5V power supply to these USB ports not served at all.
Some information for general development:
- Regular USB
the port has an output voltage of 5V and a current of 0.5A
- Standard for comparison iPhone charging outputs 5V and 1A
- Well, iPad charger outputs 5V and 2A
Try this! If this is your case, try another USB port or connect your iPhone to a regular 220V charger. If your charger also doesn't charge your iPhone, read on for the next possible reason.
Reason #3: Charger/cable is faulty
The iPhone cable does not charge. Repair
The most common malfunction usb cable For iPhone charging . ok... what if the original Apple charger doesn't charge the iPhone either? Then it was time to check the Lightning cable. I disassemble and repair in a few minutes
iPhone won't charge? Charging problems? We will suggest a solution to the problem
In this video, we'll tell you what could be causing the Apple charging cable to not work correctly. iPhone,iPod,.
OK, I won't be original when I say that real chargers Apples are quite expensive. It’s another matter if you buy an iPhone charger on AliExpress (from China) - after all, it will cost you several times cheaper. BUT! BUT! BUT! I strongly do not recommend doing this! Do NOT buy or use cheap Chinese non-original chargers under any circumstances. According to reviews from friends and personal experience, I can assure you that Chinese chargers sooner or later they will play a cruel joke on your device if they do not drive it into a “wooden box”. You must realize for yourself that " cheaper doesn't mean better“, and when it’s almost for nothing, doubts about the quality creep in.
So, if your iPhone does not charge from a Chinese (non-original) charger, I would DID NOT further EXPERIMENT and would try GET A REAL ORIGINAL CHARGER FROM APPLE. Everything should be clear here.
Okay - okay... what if the original Apple charger doesn't charge the iPhone either? Then it was time to check the Lightning cable. My iPhone won't turn on, what should I do? What to do if the iPad or iPhone does not turn on and is on fire. Again, from personal experience, even the original cables that come with the iPhone fail over time. To be honest, the original cables are quite fragile to begin with. If you do not use them carefully enough, frequent bending will damage not only the outer plastic braid, but also the conductive “cores.” WHAT TO DO IF THE SENSOR DOES NOT WORK. I recently threw out my original cable because it began charging the iPhone to no more than 60%.
I have nothing against the lightning cables they sell on AliExpress. Here they either charge or not. Do you know how much an original 1m long lightning cable costs in the Apple Store? Fabulous 19. “modem mode” and what to do if it doesn’t exist. Go crazy! For this money you can purchase at least three excellent certified cables that will charge your iPhone without any problems. I tried a bunch of cables - from cheap ones at 0.99 to expensive ones at 10 from different manufacturers, and I can recommend you a really cool lightning cable from Ugreen (link to AliExpress).
- How do I get up to 90% cashback for purchases on AliExpress - Instructions
“This cable or accessory is not certified...”
Some of you have probably already encountered the message “ This cable or accessory is not certified and is not guaranteed to work reliably with this iPhone." There may be several reasons for this, and we will consider them in a separate article. I will only say one thing - starting with iOS 7, Apple has taught its devices to recognize the authenticity of USB cables. As I wrote earlier, a special chip is installed in the Lightning cable plug that allows the iPhone (iPad) to recognize the origin of this cable. The Chinese, of course, learned to counterfeit Lightning chips, but with the release of iOS 7, Apple changed the rules of the game again. Therefore, try to use original chargers... 
Try this! Use known-good original chargers and Lightning cables. If they don’t help, most likely one of the iPhone components has failed. Read about it below.
Reason #4: iPhone Battery
Any battery is consumables... This means that batteries do not last forever and require periodic replacement. I recently replaced the battery of my MacBook Air, because The battery completely stopped holding a charge and it became impossible to use the computer without a cord.
This can also happen with the iPhone, although it is quite rare. Why doesn't the iPhone charge? If the original Apple charger doesn't charge either, what should I do? What to do if Xiaomi freezes, the method really doesn’t work. The sensor doesn’t work. What happens if you charge your phone with a non-original charger... More likely, phones that are four or five years old are susceptible to this diagnosis, because... The battery, if it fails, does so gradually until it fails completely.
Replacement iPhone batteries It's not a tricky thing, but it does require some tools. Instructions for replacement are again available on ifixit.com.
If your device is fairly new, then I don't think the problem is with the battery. Very often people contact me who charged their devices with power supplies of unknown origin, and ended up having a problem. Usually in this case the charging controller or power controller fails. But more on that below. See reason #5.
Reason #5: iPhone components are faulty
Well, the last reason for today why the iPhone does not charge is internal component failure. Yes, and don’t be surprised - this is a fairly common reason! Most often, either the battery or the power/charging controller fails. What exactly has failed you can find out after diagnostics in service center. In the comments below, many people complain that their iPhone does not charge at all, or loses its charge abnormally quickly, or gets very hot, or does not accept the cable - all these are signs of a faulty iPhone power/charging controller. I wrote in detail about replacing iPhone power and charging controllers in a separate article (link). Well, if you need to explain it manually, then essentially the U2 charging controller is a chip (microcircuit) on the iPhone board that can be replaced (resoldered) with a new one. In normal service centers, this procedure does not cause any particular difficulties and costs from 2,500 to 4,000 rubles.
Try this! I can’t say right away what exactly went wrong in your case. You have a direct route to the service center. Be sure to check the functionality of your iPhone after replacing the charging controller or battery. Even new ones iPhone batteries(again of Chinese origin) may be defective and not accept a charge. If the iPhone turns off in the cold and does not turn on and what to do if the iPhone is frozen. But no. What to do if your iPhone turns off and won’t turn on. Or maybe the technician mistakenly replaced one component and never discovered the real problem. Therefore, ask the service center to connect your iPhone to a power source and make sure that the phone turns on and the charge indicator has reached at least a couple of percent.
In any case, write in the comments which method helped you. If your iPhone still won't charge, write to me about it and I'll try to find another solution for you. What to do if the iPhone thinks, Ways to recognize non-original headphones. We are always at the same place, so come and ask. In order not to lose touch, subscribe to updates using the form below, as well as to our group in contact.
A big request to all of you - help our project if you can (link below).
The Lightning cable, which replaced inconvenient wires with wide connectors, has no disadvantages, it is better in everything, but this does not mean that you will never have problems with it...
If the Lightning cable does not charge your iPhone or iPad, then there are only a few reasons for this, and two of them can be solved without purchasing another cable.
The reasons may be the following:
- The connector in the iPhone/iPad or on the cable is clogged;
- You are using a non-certified Lightning cable (this cable or accessory is not certified);
- The cable is broken.
The connector in the iPhone/iPad or on the cable is clogged
I encountered this problem personally; visually, with additional lighting, the cable connector and port on the iPhone/iPad look clean. What also confused me was that the device still charged when the cable was bent. For me, the problem was obvious - the cable near the connector was broken.In fact, it turned out that some contacts were simply clogged. You can take a match or a toothpick, wrap it in cotton wool and wipe it properly. Don't be afraid to gently scrape dirty areas without using cotton wool. It is also advisable to clean the connector itself.
If, after these procedures, the iPhone or iPad began to charge properly or you could see the cable better, then this was your problem.
How to use a non-certified Lightning cable (not from Apple)
Starting with iOS 7, the insidious guys from Apple have banned the use of charging and iPhone sync, iPad unofficial Lightning cable. When you connect one, you will see the following message:This cable or accessory is not certified and is not guaranteed to work reliably with this iPhone/iPad.
But don’t rush to run to the nearest store and buy expensive original wiring, this protection can sometimes be bypassed. True, this requires a little tinkering; let’s look at the example of charging an iPhone or iPad from a Chinese charger.
- Connect to the network from the USB/Plug side
- Connecting the Lightning cable to the iPhone/iPad
- We see a window pop up stating that we are scoundrels and are using an uncertified cable, click “Close”
- Do not turn off the device, pull out the cable from it and connect it back to the iPhone, iPad
- Click “Close” again and watch as the gadget begins to charge.
There is another way to bypass the protection, sometimes in Cydia repositories I came across a jailbreak tweak called Unauthorized Lightning Cable Enabler, which solves the problem for some people. Because of bad work Tweek has no permanent place of residence.
Lightning cable is broken
Everything is obvious here. If you are not a fan of waving a soldering iron, then calmly go buy a new cable. The only thing that can be recommended in this situation is to think about how you can extend the life of the Lightning cable in the future.To do this, we need two springs from ordinary ballpoint pens, a little patience and accuracy.
The essence of this method is that the spring is metal and it simply does not allow the wire to bend that much, after which the wire eventually becomes deformed and fails. In addition, the spring shines and only decorates the wire, unlike electrical tape.
Read more about this method you can read in (author AlexST03).
If you haven’t found an answer to your question or something didn’t work out for you, and there is no suitable solution in the comments below, ask a question through ours. It's fast, simple, convenient and doesn't require registration. You will find answers to your and other questions in the section.
Join us on
