Kind time of the day everyone. It was high time to write an article How to install weapon models for cs 1.6, and right now we are doing it, as we write with high quality. In fact, it's all pretty simple, the time will take no more than three minutes. Let's get down to business right away.
Go to the "" category on our website, choose what you like and download. Why do we offer our website? This is because we have checked all the additions with our own hands, which means that everything is done efficiently and everything works. After downloading, you will have an archive, extract it via winzip or winrar, I think everyone can do this.
Then we can observe the following files (consider an example ""):
There are 2 folders, one of them "models", it directly contains the files, which we will write about below. We also add a link to the instructions in each archive, in case you suddenly forget the installation process.
v_m4a1.mdl - weapon model directly in the hands. All add-ons have this skin, as it is key. All the rest are additional and are not always available.
w_m4a1.mdl - Shows the ground view. If this file is present, then when you throw the weapon on the ground, you will observe its beautiful appearance.
p_m4a1.mdl - the type of weapon other players have. Also a good file, as it shows the downloaded model and other players in their hands, which complements the game.
The second folder is "sounde", in which we observe the sounds of weapons: shots, reloads, and so on. They also do not come with all models. Well, if they are, this is very good, since the banal dubbing of weapons sometimes gets boring.
How to install weapon models in CS 1.6
We examined the files, now the installation follows. We transfer the files from the models folder to the models folder of the game, all CSs are different, but something like this will be the path "D: \ Games \ Counter-Strike 1.6 \ cstrike \ models". We confirm the replacement of files. Next, transfer music and sounds from the sound folder to "D: \ Games \ Counter-Strike 1.6 \ cstrike \ sound". We also confirm the replacement of files. In general, that's all! We go into the game and check. As you understand, even a child can figure it out because of the simplicity. Sometimes it happens that there are no Sound and Models folders in the archive, then the model files just go. They also need to be moved to a folder.How to restore default weapon models in cs 1.6
If you are tired of the downloaded and new skins and want to play again with the standard ones, then this is also easy to do. Delete unnecessary models and sounds from the Sound and Models folders, respectively, you can even delete all files. Then go to any cc server, preferably a standard one. These files will be downloaded to you.I hope we have solved all your questions. If some points remain unresolved, then write in the comments. We will definitely help everyone. Happy and interesting game!
Also for those who did not understand, we attach a video instruction:
Probably everyone would like to change any model of weapons, players, or just another model, such as a bomb. After reading this article, you will know how to install new ones in your game. Everything is much simpler than you think, and now we will prove it to you. Let's get started.
After loading the model for cs 1.6 in the archive, you can find different kinds of file formats.
Required model file:
.mdl- The very model that interests us, for example vip.mdl.
Files that are not always in the archive with the model (but the model works without them):
.wav- this file is responsible for the sound of the weapon, for example, it is a shot or the sound of reloading.
Path for example: « Your game \ cstrike \ sound \ weapons \ ak47-1.wav»
.spr- this file is responsible for the form weaponlist "a, simply speaking: weapon icon design
Path: « Your game \ cstrike \ sprites»
How to install weapon models for CS 1.6
Weapon models have 3 planes, or rather, these are:
1) v_.mdl- the kind of model that you see in your hands;
2) p_.mdl- the type of model that you see in your friend's or opponent's hands;
3) w_.mdl- the kind of model you see on the ground.
Ak47 model in three planes.
Weapon Model File ( .mdl) is copied to " Your game \ cstrike \ models \».
For instance: « Your game \ cstrike \ models \ v_ak47.mdl».
The shield model is stored in the shield folder: " Your game \ cstrike \ models \ shield» .
How to install player models for CS 1.6
Player models mostly have 1 file, for example vip.mdl, but there is rarely a file with the * T.mdl prefix i.e. vipT.mdl... This happens when the textures of the model are stored in the * T model. * T model, if there is one, it should always be with the usually model together, for example vip.mdl and vipT.mdl should be in the same folder called vip.
The model name is responsible for a specific player model:
guerilla.mdl is a Guerilla Warfare player model [T]
.
terror.mdl is the player model Phoenix Connection [T]
arctic.mdl is the Arctic Avengers player model [T]
leet.mdl is the L337 Crew player model [T]
gign.mdl is the French GIGN player model
gsg9.mdl is a German GSG-9 player model
sas.mdl is a UK SAS player model
urban.mdl is the Seal player model
vip.mdl is the model VIP player
1)
Download the model and unzip it. Before us is a WinRar archive called ESL model If you don't have WinRar archiver, you can download it) and the cstrike folder.
2)
Let's go to the cstrike> models> player folder. Before us are nine folders for each model: arctic, gign, gsg9, leet, sas, terror, vip, guerilla. 
3)
Each folder contains a file .mdl with exactly the same name as the folder name itself. This is very important, the name must match. 
4) Copy to " Your game \ cstrike \ models \ player»All folders with models or only the folder whose model you are interested in. When replacing files, most likely you will be asked whether to replace the attached file, click "YES".
If you have STEAM, then you need to install:
player models along the path " \ Steam \ steamapps \ common \ Half-Life \ cstrike \ models \ player" or " \ Steam \ steamapps \ common \ Half-Life \ cstrike_hd \ models \ player»
weapon models along the way " \ Steam \ steamapps \ common \ Half-Life \ cstrike \ models \»
[!!!] Attention! If, after installing the models, the map does not start for you, you need to register the command in the game console: mp_consistency 0... This command disables model checking. In order not to prescribe this command every time, write it in your
Before installing mods, you must have already installed AmxModX and Metamod, without them mods and plugins will not work.Algorithm for installing mods
Each mod has a difference in installation, but in general, you can observe the general sequence of actions for installation:1. Downloading the mod from the official site.
2. Unpacking the archive.
3. Uploading files to the server.
4. Editing plugins.ini, adding a mod (if required according to the instructions).
4. Server restart.
Installing War3ft mod
1. Download the mod from the official site.2. Unpack the archive to your local disk.
3. Upload the contents of the war3ft_v3.0rc13 folder to the server into the cstrike folder, namely:
Copy the addons folder with replacement to the / cstrike / folder
copy the sound folder to the / cstrike / folder
copy the sprites folder to the / cstrike / folder
copy the wc3.css file to the / cstrike / folder
4. Edit the cstrike / addons / amxmodx / configs / plugins.ini file using a text editor. At the very top of the file, add the line: war3ft.amxx
5. Restart the server. The installation of the mod is complete.
Installing Zombie Plague Mod
1. Download the mod (zp_plugin_50.zip) and the necessary files (zp_resources.zip) from the official site.2. Unpack the contents of the zp_plugin_50.zip archive on your computer and download the contents to the cstrike folder:
upload the addons folder to the cstrike folder on the server.
3. Unpack the contents of the zp_resources.zip archive to your computer and download the contents to the cstrike folder:
folder upload models to the cstrike folder on the server.
folder upload sound to cstrike folder on server.
folder upload sprites to cstrike folder on server.
4. Restart the server. Installation completed.
In fact, no one will find it difficult install weapon models in Counter-Strike 1.6, this is a fairly simple process and absolutely anyone can understand it. Read this article carefully and you will understand everything yourself!
So, first of all, you will need yourself. You can find and download them on our website. And in order to make the installation process as easy as possible, we packed all the models into installers, which means that the installation will take place in a couple of clicks! To download the weapon model by the installer, just click on the "download" button.
Have you downloaded it? Launch the installer and follow the instructions.
When choosing the installation directory, we indicate the root folder with the game. For example: D: \ Games \ Counter-Strike 1.6
This completes the installation! We go into the game and check!
But, if you want to install the model on the STEAM version of the game or manually, you can download the model as an archive! This process is a little more complicated, but now we will explain how everything is done. :)
Download the archive and get the contents from there. In order to open it, you need the so-called archivers. If you have not yet installed any of the programs on your computer that can open files of the .rar then you can download them here -.
All files in the archive are already sorted into folders, and all you need is to transfer the folder cstrike to the root directory of the game. For the non-steam version of the game, for example: D: \ Games \ Counter-Strike 1.6, for steam it is: D: \ Program Files (x86) \ Steam \ steamapps \ common \ Half-Life.
If the archive contains files with the extension .mdl and they are not sorted into folders, then transfer these files to folders:
D: \ Games \ Counter-Strike 1.6 \ cstrike \ models- NON-STEAM
D: \ Program Files (x86) \ Steam \ steamapps \ common \ Half-Life \ cstrike \ models- STEAM
If, in addition to models, the archive also contains sounds and sprites, then install them in the following folders:
Sounds (extension - .wav): D: \ Games \ Counter-Strike 1.6 \ cstrike \ sound \ weapons
Sprites (extension - .spr): D: \ Games \ Counter-Strike 1.6 \ cstrike \ sprites
Still have questions about installing weapon models? Write them in the comments, and we, in turn, will answer them!
