Required tools and screwdrivers for disassembly Samsung Galaxy S6 Edge:
- Plastic paddle and pick
- Suction cup for removing the display
- Regular hair dryer
On our website you can buy required set screwdrivers for disassembling Samsung Galaxy S6 Edge.
If this is your first time starting to disassemble a smartphone, we recommend that you pay attention to the article “”. This article contains recommendations that will help you avoid typical mistakes in the process of disassembly and repair.
In this repair guide, I will show you how to disassemble and replace the back cover of the Samsung Galaxy S6 Edge yourself. This repair can help if your back cover is broken or cracked, or you want a new color.
Before starting repairs, be sure to turn off your phone and then remove the SIM card.
The very first step is to remove the back cover. Rear end Samsung cases The Galaxy S6 Edge is securely glued, so in order to remove it, warm up the phone around the perimeter using a regular hairdryer. Next, place the suction cup closer to the edge of the phone and pull it up. Place a plastic pick or the flat edge of a metal spatula into the hole formed, and do the same on the other side of the phone. Next, run a pick along the perimeter of the cover to peel off all sides of the back cover. If necessary, heat the glue again. Once all sides are peeled off, you can remove the cover.
Installing the back cover and reassembling the Samsung Galaxy S6 Edge
Now attach the new back cover in place. Old glue is usually still quite sticky. Put the back cover back on, heat it slightly, and then press the cover down with your hands or a couple of books.
-min.jpg)
In the new generation of Galaxy S6 smartphones, Samsung has completely revised the concept of a phone device. They made smartphones similar to iPhones both outside and inside. Therefore, it will be especially interesting to learn how to disassemble the Samsung Galaxy S6 Edge, which breaks as easily as the iPhone 6. During the disassembly process, you can learn how to replace the back glass and Samsung display Galaxy S6. Samsung wouldn't be an Asian company if it made a smartphone without glue. The first thing you have to prepare for is a copious amount of glue in the structure. To remove the back cover of the Samsung Galaxy S6 Edge, you need to warm it up around the perimeter, then press the edge with a suction cup or slip a pick and walk along the entire device.
The back cover of the Samsung Galaxy S6 and Samsung Galaxy S6 Edge is purely decorative. Hidden underneath are the screws that make the frame, display, and motherboard into a single device. Therefore, you remove the cover to the side and continue to disassemble the smartphone with a screwdriver.
The display panel and aluminum frame of the Samsung Galaxy S6 Edge are held together with 13 screws, which can be removed with a Phillips screwdriver. Once the screws are unscrewed, the display can be picked up with a spatula and removed from the grooves of the frame. The smartphone will split into two halves. The aluminum frame is a strength frame and an antenna at the same time.
Samsung has once again made a device in which the main elements are attached to the display module, and not to the supporting aluminum frame. This is a strange approach, time will tell how justified it is and how it affects the survivability of the Galaxy S6 Edge. Next, you should remove the motherboard by disconnecting the two coaxial antenna conductors.
Under motherboard The battery connector is hidden. To use Edge, you will need to completely disassemble the smartphone and remove the motherboard. Miracles in a sieve. The battery tends to become outdated during use, while flagship model will be relevant in the market. In a year or two, Samsung Galaxy S6 owners will face headaches and the high cost of typical repairs.
Samsung made their own version of Touch ID, which, unlike the iPhone, can be replaced, which is a good sign.
The curved glass of the Samsung Galaxy S6 Edge is separated from the display by heat. After the Edge falls, a curved display will be possible if the latter is not damaged.
Detailed photo instructions: how to disassemble Samsung Galaxy S6 Edge + review and full specifications Samsung Galaxy S6 Edge smartphone.
Flagship Samsung, with a curved screen on both sides.
At the bottom of the phone there is a speaker, microphone, headphone jack and USB 2.0 port.
At the top end of the phone there is a second microphone, an IR transmitter and a SIM card tray.
So, to remove the back cover we need a pick and a suction cup. Gone are the days when the back cover could be removed by simply sliding it.
The back cover fits very tightly to the body and removing it is not so easy, but it is possible.
After you separate the back cover from the phone body, clean everything from the glue.
Interestingly, the battery is not located in the body of the phone, but on the front along with the display module. There are no components at all on the middle part of the phone body.
Let's separate the two halves of our phone using a screwdriver.
After unscrewing all the screws, take a plastic spatula and separate the case into two parts.
As you can see from the photo below, pull out battery we still can't, to do this we will have to remove the motherboard.
According to Samsung, the antennas are ultrasonic welded to save space.
The power button is also soldered to the body using ultrasonic welding and we cannot remove it.
So, at this stage we can remove the motherboard by first disconnecting the two coaxial cables.
Now you can remove the main camera from the motherboard.
This is what the main rear and front cameras look like. There is a dual axis gyroscope chip on the main camera for optical stabilization images (in the yellow square) and a serial flash memory chip (in the red square).
Finally we can remove the battery, which is held in place by a strip of glue.
Remove the board from the case USB port 2.0. Why Samsung decided to install 2.0 and not 3.0 is a big mystery to us. Perhaps to save space, but losing 90% of productivity because of this is absurd. Hello from 2000)))
Most big problem in Samsung Galaxy S6 Edge is to replace the display, since when it is removed there is a high probability of damage to it. But if you still want to remove it, you can take a risk, and maybe it will work out. According to Samsung, the curved glass is created using a process called 3D thermoforming, a process of heating and shaping the curved glass, which makes it eight times more expensive to make. Judge for yourself: regular glass costs about $3, and curved glass costs about $25.
We remove the glass and... we see an unusual curved AMOLED display. By the way, it is precisely because of this display that some users see under protective glass bubbles, pimples, stripes and other strange formations))). Samsung admitted that this is a flaw and phones with such a defect must be replaced.
The last component that can be removed from the display frame is the Home button along with the fingerprint sensor.
So we took apart the Samsung Galaxy S6 Edge. Below is a photo of all the components that we managed to remove.
disassemble Samsung Galaxy S6 Edge
Disassembling the Samsung Galaxy S6 Edge is a labor-intensive task that requires care and attention, so do not proceed with disassembly if you are not confident in your abilities!
Detailed specifications of Samsung Galaxy S6 Edge
Type: smartphone
OS version: Android 5.1
Case type: classic
Body material: aluminum and glass
Control: mechanical/touch buttons
SIM card type: nano SIM
Number of SIM cards: 1
Support for contactless payments: yes
Weight: 132 g
Dimensions (WxHxD): 70.1×142.1×7 mm
Screen type: color AMOLED, 16.78 million colors, touch
Type touch screen: multi-touch, capacitive
Diagonal: 5.1 inches.
Curved screen: yes
Image size: 2560×1440
Pixels per inch (PPI): 576
Automatic screen rotation: yes
Scratch-resistant glass: yes
Multimedia capabilities
Camera: 16 million pixels, LED flash
Camera functions: autofocus, optical stabilization
Recognition: faces
Video recording: yes
Max. video resolution: 3840×2160
Max. Video frame rate: 30fps
Geo Tagging: yes
Front camera: yes, 5 million pixels.
Audio: MP3, AAC, WMA
Headphone Jack: 3.5mm
Standard: GSM 900/1800/1900, 3G, 4G LTE, LTE-A Cat. 6, VoLTE
Interfaces: Wi-Fi 802.11ac, Wi-Fi Direct, Bluetooth 4.1, IRDA, USB, ANT+, NFC
Satellite navigation: GPS/GLONASS/BeiDou
A-GPS system: yes
Memory and processor
CPU: Samsung Exynos 7420
Number of processor cores: 8
Video processor: Mali-T760 MP8
Built-in memory: 64 GB
Volume RAM: 3 GB
Battery type: Li-Ion
Battery capacity: 2600 mAh
Battery: non-removable
Charging connector type: micro-USB
Function wireless charging: There is
Other functions
Control: voice dialing, voice control
Airplane mode: yes
A2DP profile: yes
Sensors: light, proximity, gyroscope, compass, barometer, fingerprint reading
Flashlight: yes
USB host: yes
Use as a USB drive: yes
Additional information
Features: processor – 4 cores 2.1GHz + 4 cores 1.5Ghz
Let's find out in what ways you can open the back cover of your Samsung mobile phone. None mobile phone Can't do without a SIM card. This is a small chip that provides us with services cellular communications. In some Samsung models you need to remove the panel to gain access to the cell where the chip is inserted. And also Micro-SD - flash drive for mobile device. Or get to the motherboard for repair.
How to remove the cover on a Samsung J5 phone
Recently, developers of mobile phones from different brands have begun to create cases in which the back cover is simply missing. In fact, it exists, but it is not possible for ordinary users to open it without special tools. For example, the two components of the Samsung J5 case are glued together. And in order to unstick them, the body must be subject to heating at a temperature of 100 degrees. This will require hot air gun.
Warming up the case with a hot air gun
Before opening the case, be sure to remove the slots for the SIM card and flash drive.
The barrel of the hot air gun must be aimed at back Samsung and its seams. Then you need to arm yourself with a plastic card or a plastic scalpel to pry off the front screen module.
Use a plastic card to line the seams of the case
The cover is not a thin plastic sheet, as in classic smartphones, but rather a recess in the form of a bath. You should be very careful when working along the seam of the phone with a card. Don't run it too deep. 0.5 cm is quite enough. Be careful not to disrupt important phone modules.
Use a plastic card to open the Samsung case
When the lid gives way, do not rush to open the case completely; do this with caution. After all, both parts exchange information using a wide cable that connects the screen module and the Samsung motherboard.
Screen module cable in Samsung
To disconnect the cable, you need to open the fastening cover and remove the cable from the socket. It's quite simple. The main thing is not to rush and be careful.
How to open the back panel on Samsung Galaxy S7 Edge
Let's look at an example of how to open non-removable back covers on Galaxy smartphone S7 Edge specialists. It is much easier to do this when you have equipment special for this at hand. It resembles a regular vice, equipped with a large suction cup.
Device for opening the cover on a Samsung smartphone
It serves as a holding tool for the rear of the body. With this equipment you will not need a heat gun. Since it refers to methods that have a certain risk of breaking the Samsung with high temperature.
Procedure:
- In the middle there is a niche for the phone. The body is placed between two rubber vise holders;
- The lid of the device is closed and the suction cup is activated. It is attached to the back cover of a Samsung smartphone. The joints must be moistened with alcohol or an alcohol-containing solution;
Attaching a suction cup to the back cover of a Samsung smartphone
- The pressure regulator, which is located on the right, comes into play. When twisting it, the smartphone body is held in a rubber vice, and the suction cup “pulls” upward;
Pressure regulator in the device
- The regulator is hand-tightened, but not tightly tightened, since we are dealing with a fragile material. Every few minutes we tighten the regulator further.
Open case of a Samsung smartphone
Ultimately, the glue between the parts of the case gives way and the device is disassembled into two main parts - the back cover and mobile module Samsung phone . When the cover comes off the module, there is no need to immediately open the device. It is necessary to remove the suction cup from the body, after which you can open the machine.
Removing the cover using improvised tools on the Samsung Galaxy S9
More popular model Samsung Galaxy The S9 is practically no different in the process of disassembling the case from other models. Here, too, the two components are glued together, as Samsung engineers decided. But we will consider manual disassembly of the device, without any special tools. We will use improvised means, which are in every home. For example, instead of a hot air dryer, you can use a regular hair dryer to dry your hair. But use it to its full potential. Direct the hot air flow exclusively to the joints of the housing.
Use a hairdryer to heat the glued joints for several minutes. A suction cup is also required to safely remove the back cover.
Tools for opening the Samsung cover
It can be purchased at any children's store. Large suction cups are preferred - The more area of the back cover is covered, the stronger the suction cup will hold it. We will also need guitar picks ( plastic plates in the shape of a triangle) or plastic cards. Use two to support the already opened parts of the body.
Procedure:
In this material we will tell you how to disassemble the Samsung Galaxy S6. New smartphone made in a housing with non-removable battery, so this operation will not be so simple.
Let us immediately note that if you decide to disassemble the Samsung Galaxy S6 yourself, you automatically lose the warranty. You also need to prepare for the fact that there is quite a lot of glue inside the smartphone, and in some copies - especially a lot. This approach to assembly, unfortunately, is quite traditional for Asian manufacturers.
We also note that disassembling the Samsung Galaxy S6 Edge is no different from disassembling the regular Galaxy S6, so further we will consider the disassembly process using its example.
Why might Samsung Galaxy S6 need to be disassembled? For example for self-replacement battery, which is now non-removable.
Removing the back cover is quite easy; to do this, you need to pry it off from the edges with a screwdriver or, which is much better, a plastic pick, and walk around the perimeter of the cover. Some people recommend preheating the back cover or removing it using a special suction cup.
As we can see, there is quite a lot of glue here.
Carefully remove the lid completely.
The display and metal frame of the Samsung Galaxy S6 are connected using 13 screws, which are unscrewed with a thin Phillips screwdriver (thanks, not a hex screwdriver or some other perversion). After the screws are unscrewed, the screen can be carefully picked up and removed from the grooves of the frame.
Now comes the most interesting part. On the Samsung Galaxy S6, the board is attached to the display rather than the frame. Which creates, for example, when removing a battery, additional difficulties. Motherboard removed after disconnecting the antenna wiring.
Now you can remove the battery (!). Why not at the beginning is a proprietary riddle from Samsung.
You can now remove Touch ID.
Now you can detach the glass from the display. A number of sources again recommend preheating it.
Max Lubin
In the comments to many previous articles about smartphone repair, you asked the question of how to disassemble waterproof Samsung smartphones Galaxy S series to replace the back cover, and how difficult it is. Today I will try to describe this process in detail, indicating the nuances and possible pitfalls that may arise during the analysis process.
Considering the abundance of glass in the design of modern phones, the most common cause disassembly is not the need to repair electronics, but a banal replacement of the back cover, which often breaks when the phone is dropped.
Looking ahead, I can reassure you Galaxy owners S7/8/9 in that even with a broken back cover and a broken protective display glass, your phone is likely to remain waterproof due to the presence of a laminating film on the inside of the glass. This is clearly visible after removing this very cover. The film is surprisingly durable, and even shards of broken glass can rarely damage this film. This is a very big advantage of Samsung phones.
If, despite this, the back cover needs to be replaced, you must select a new one. Therefore, we will not start with the analysis itself, but with the choice of the back cover, which can be of very different quality, ranging from very inexpensive plastic ones to very expensive 100% original ones.
The easiest way to buy an original cover is to find an ad on Avito or Yulia selling the model you need for disassembly. In this case, you will receive, although used, an original lid, the quality of which will be noticeable better than analogues. It's hard to say how much it might cost. It depends on the seller's appetites. Approximately for such a cover they ask from 500 to 1,000 rubles.
Another option is to order on online platforms such as AliExpress or eBay. In the first case, you will most likely receive an analogue, the quality of which can vary from excellent to terrible. In the case of eBay, it is better to look at lots from sellers located in the USA, but then you will have to use the services of an intermediary, which will increase the cost of the purchase. On average, it will cost you 1,000-1,500 rubles.
You can buy a spare part at the “shop around the corner” for 300-500 rubles. The advantage of such a purchase is the opportunity to evaluate the quality and appearance before giving away the money. The downside is that, most likely, it will be the same Chinese spare part.
There is another, most uneconomical option - buying the original from official service centers (if they sell it). The cost of such pleasure can reach up to 3,500-4,500 rubles. If you are a perfectionist, then this is your option.
After we have purchased the spare part, it is time to start disassembling our patient.
The tools we will need are:
- Plastic connectors. Guitar picks or even thick plastic packaging from something are perfect for this role.
- Sucker. It is very desirable to have it for these purposes. Ordinary plumbing will also do.
- Wide tape
- Rubbing or isopropyl alcohol. A syringe or jar with a spout as a container. It’s more convenient for me to use a jar of hydrogen peroxide, since it’s easier to control the dose :)
- An ordinary household hair dryer as a heating tool. By the way, instead of a hairdryer, you can use a canvas bag filled with salt, preheated in a frying pan to 90 degrees. This option is preferable to a hair dryer, as it will allow you to warm up the smartphone better and more evenly, which means it will soften the adhesive tape holding the lid more strongly.
- Construction gloves to protect your hands from burns (the phone will be hot).
After everything is ready, it's time to get started.
Turn off the phone and get started.
First you need to roll up the broken back cover in tape. This is necessary so that when disassembling, glass shards do not remain on your fingers or fly into your eyes.
If you are disassembling the phone not to replace the cover and at the time of disassembly the cover is intact, then you still need to glue it - it’s not a fact that you will be able to open the phone without breaking the cover.
Please note that it is necessary to seal the lid with tape as carefully as possible, preferably without bubbles, and most importantly, without jams or joints. Otherwise, the suction cup will not stick to the lid, and opening the phone will become more difficult.
Then we warm the phone with a hairdryer or a bag of heated salt.
When the phone is warmed up (so that it is difficult to touch it with your bare hand), glue the suction cup closer to one of the lower corners.
Then we drop alcohol into the joint between the lid and the body and begin to pull the lid off using the suction cup, while simultaneously trying to insert a pick or a plastic strip into the gap between the body and the lid.
If you are opening a whole cap, you need to be very careful at this stage and not try to push the pick in too far, as the tension is too great and the cap could easily burst.
Never use a metal tool for these purposes, otherwise you are almost 100% likely to crack the lid.
The most important thing is to achieve the appearance of a small gap between the lid and the body. This may require several rounds of warming up, dripping alcohol, and pulling the lid off using the suction cup. If the lid is already broken and the purpose of disassembly is to replace it, then you don’t have to worry too much - pull harder and try to push the pick inside.
In this case, alcohol is needed to make the tape easier to come off from surfaces. Also, alcohol will prevent the tape from setting back. Don't pour too much, but don't worry too much - the alcohol won't harm the inside of the phone. The optimal dose is three/five large drops per joint.
After the lid is slightly opened, we continue to drip alcohol into the joint and go around the entire perimeter, peeling off the tape. Take your time and remember to warm the lid where you peel it off.
An important nuance - do not push the connector deep inside in the middle of the right side. There, the outer turns of the wireless charging coil run very close to the edge, and there is a danger of damaging them.
Please note that in addition to the tape around the perimeter, there are sticky white seals glued inside the lid that must be preserved. After the old cover is removed, you need to carefully re-glue the seals either on the new cover or on the inside of the phone in the same position as on the old cover. This will avoid sagging of the new cover and make the structure more assembled and dense.
Then you need to peel off the block of protective glass for the camera and sensors from the old cover.
The glass is in an aluminum frame, which bends very easily, so before peeling it off, warm it up thoroughly and remove it carefully. This frame is glued to a ring of tape on a thick base.
It is best to peel flat thin instrument. I use a blade.
Once you've prepared your new cover for installation, it's time to clean it up. Namely, clean the perimeter of the metal frame on which you will glue the new cover from any remaining tape. Cotton swabs and alcohol will help us with this. We slowly clean the frame, achieving absolute cleanliness, without lumps of old glue and tape. This is especially important if you want to maintain water resistance.
If protection from water is not important, then take the lid, align it with the body and, carefully pressing it along the perimeter, glue it in place.
If you need to restore protection from water, then, in addition to the tape that will most likely be on the new lid, you will need to seal the lid with glue or sealant around the perimeter. I recommend glue, since the sealant in a confined space without oxygen will take a very long time to dry.
After the lid is glued, you need to put it under pressure for a couple of hours. Don't overdo it. A big book is enough.
That's all, our phone is ready. All that remains is to clear the table and you can use the new thing.
Conclusion
In this case, I specifically showed as an example an inexpensive Chinese cover, which can be bought in most spare parts stores, and which will most likely come to you from AliExpress. The difference in color with the original is striking.
Therefore, it is worth considering whether this option will suit you. If you are not satisfied, then you should look for other options that I wrote about at the beginning.
Pay attention to the color of the tape in the original and in Chinese. This is the easiest way to distinguish the original from the fake - in the original, adhesive tape is a thick white tape with neat edges. If the tape is a different color, you have a fake or an analogue, which can also be good, but less common.
As you can see, if you don’t rush, then with the proper skill and patience, opening such a device turns out to be a simple and exciting task that you can do at home.
HTC flagship
The smartphone has an original design, its thickness is less than a centimeter, and its height is about 15 cm. This phone is chosen by successful people, for whom their device is not just a phone, but a treasure trove of information: photographs, important notes, music, documents and applications.
Xiaomi phones themselves are a little different from the standards we are used to. Due to the fact that SIM cards are inserted from the side, it is not so easy to remove the back cover of the phone.
Yes, you can use a special needle device, but it only helps to reach the card slot in some Hiomi phones. Next, it’s better to stock up on a mediator, and if you don’t have one, in this case any plastic card will help, you need to insert it between the case and the back cover (where the charging connector is), then you need to unclip all the latches around the perimeter:
Another way you can open the back cover of a Xiaomi phone is with any suction cup you have at home (even one from a DVR will do):
In order not to damage anything and to safely open the cover of your Xiaomi smartphone, you need to use a special needle for such purposes; it is included in the kit and looks like this.
Nowadays, many smartphones open with such a thing; you can’t remove the SIM from an iPhone without such a device. Just don’t do like me, don’t use a regular sewing needle to open it, then the phone will act up a little. I opened the SIM card with a needle on an Apple device, and now the SIM card often fails.
How to open the back cover on a Xiaomi smartphone?
A feature of Xiaomi phones is that it will be problematic to remove the back cover yourself, although most smartphones currently have the same feature.
You can remove the cover, but I wouldn’t remove it at home; it’s better to do this procedure in a service center, since you will need special equipment and experience in such work. If you want to take a risk, you can open the lid using a special spatula.
If you want to open the SIM card tray, you can use the tool that comes with this smartphone.
Below in response is a photograph of this instrument.
Indeed, on Xiaomi smartphone It's not easy to open the back cover.
But if you need to open the back cover, then you can use a special needle (which comes with the smartphone), it is designed just for this, so that you can open the cover.
You need to act very carefully, pry a special hole with a needle and open it.
This is what this device looks like, with which you can open the back cover.
Well, why “no way!” - it was somehow assembled at a factory (or maybe in a basement)
If you need to open the back cover of the phone Xiaomi Redmi(Xiaomi) or Mi Max, and not just insert a SIM card, this is done very carefully. First, we pull out the tray for this same SIM card, otherwise it will interfere with disassembly. Now, using a special spatula, you need to, starting from one corner of the screen, slowly move the cast cover away from the latches and so smoothly move around the entire perimeter, without creases or distortions. After you have passed the spatula into the circular area, quietly lift the back cover and unhook the cable connecting the back cover and the front panel. That's how he figures it out.
The Xiaomi model phone differs from others in its single body, so it is not possible to open the back cover.
In order to open the tray to change the SIM card, you need to use a special needle that comes with the phone. You need to press the side of the phone body into a special hole and remove the SIM card tray.
In this model, there is no need to remove the battery, since it does not block access to the SIM card slots.
I myself use a phone of this model, I used to think about how it would be not to be able to remove the battery (we are too used to removing it), but now I don’t understand why it needs to be removed. If the phone is good, with a capacitive battery, then the battery will not overheat and there is no need to remove it.
Of course, if you wish, you can open it using a sharp nail file, but it is better not to do this.
You can, of course, try to open the back cover (like me), for this a women's iron nail file, thin, will be suitable for tampering with the latch, but Xiaomi phone you can damage or scratch it, but that’s not a fact, I opened it and nothing happened to it, I performed the manipulations I needed, but the lid was difficult to open, and I don’t recommend this method.
How to open the lid on Samsung Galaxy A3?
The modern mobile phone was created to simplify our lives. In practice, however, difficulties may arise.
Thus, some device users note that not all phones are comfortable to use or are not as advanced as their predecessors.
Therefore, you will need this summary if you do not understand how to open the cover on the Samsung Galaxy A3.
It becomes so unpleasant when you don’t understand how to open the back cover, and as luck would have it, there is no one nearby who can give you a hint or help.
But everything is not so sad, and on at the moment You will learn how to properly handle the Samsung Galaxy A3 in this case.
Not an easy task for many
If you ask most users the question: “How to remove the cover on a Samsung A3?”, they will not be able to answer anything.
It seems that the development company decided that to perform such an act, we must contact the centers service phones.
At the centers, specialists will do this simply and quickly. After all, for this they have a set of special tools: a “spatula” (a device that disconnects fasteners) and a Phillips screwdriver.
But what if you do not have the ability to contact specialists or simply do not have enough time to visit service center? There is only one way out - to remove the back cover from the Galaxy A3 yourself.
Review of SAMSUNG Galaxy A3 | mobilnika.net
| mobilnika.netPrices for SAMSUNG Galaxy A3 - Review of the latest stylish model from SAMSUNG .
How it's done
It is important not to use brute force when disassembling your smartphone. Otherwise, this can lead to negative consequences: most likely the smartphone will not perform its functions.
Also, dents, scratches or other damage may appear on the device’s body, interfering with its normal operation and significantly spoiling its appearance.
Therefore, when disassembling the Samsung A3, strictly follow the instructions below.
- Find where your smartphone's speaker is located.
- You will see a small recess (slit) above the speaker (from the end). With its help the cover is removed.
- Do not lift the lid suddenly, otherwise you may damage back panel. You can simply press it with your fingernail and gently pull it away from the device. There is no need to worry - it will not break. Do not use sharp objects under any circumstances!
The back cover is open!
How to open the cover of Samsung Galaxy A3 and Galaxy A3 mini
To open the lid, specialists, in addition to the above tools, use a specialized hair dryer to heat it up.
It is quite difficult to do such a procedure at home. After all, you will have to warm up the edges around the perimeter of the smartphone.
The phone is monolithic, so it is important to heat it at a temperature of no more than 150 degrees (use a regular hairdryer for this).
After heating, it is enough to carefully pry the cover with a sharpened plastic card, snapping the screen off the body. That's it - access to the internal modules is open!
If your goal is to completely disassemble the phone, then you need to carefully read the instructions for complete disassembly. Inserting the cover is also easy - follow the steps in the opposite order.
If you know any other methods on how to remove the cover from the Samsung Galaxy A3, share them in the comments. If you have any questions, ask, I will be happy to answer everything.
For many BQ Strike smartphone owners, the question of how to remove the back cover of the device has become a real problem. Those who have never manually removed the back panel do not understand how to do it correctly and accurately without damaging the plastic or display, and try to use various improvised means such as scissors, credit cards or knives. But you shouldn’t do this - removing the cover on the BQ 5020 Strike is as easy as shelling pears with my own hands. Today we will tell you how to do it correctly. Also watch the instructional video at the end of the article.
Why do you need to open your smartphone?
The simplest and important reason is installing a SIM card in a new, just purchased gadget, as well as installing or replacing an SD memory card, the presence of which is provided in almost every Strike BQs phone. Micro-SD card allows you to expand the capacity internal memory another 128 GB, which is undoubtedly a plus.
Many smartphone owners reboot a frozen device by removing and reinserting the gadget's battery. The user may also need to open the cover to replace an outdated or non-functioning battery with a new one. Moreover, if you started do-it-yourself repair or replacing parts in a gadget, you won’t be able to get to the inside of the phone without removing the back panel.
So, let's look at a detailed algorithm of actions with which you can open the BQ phone and see what is in its internal part.
Algorithm of actions
First, inspect your smartphone. At its upper end, to the right of the micro-USB connector, you will see a small recess, as if created so that the cover can be pryed off. Carefully insert your fingernail into this recess and slide it to the left, walking along the part where the plastic case fits snugly against the glass of the smartphone display. If you are unable to do this, while moving along the body with your free hand, lightly squeeze it on the sides so that the plastic bends and makes it possible to open the lid. Next, carefully run your fingernail along the entire perimeter of the smartphone several times, thereby opening the cover of the device. The plastic panel may crack slightly when opening, and there is no need to worry - this is normal. Open the lid of the BQs 5020 Strike once, and you will easily do this operation again and again in the future.
How to close the lid back
It's even simpler here - you don't even need your nails. Take your smartphone and place it in a plastic case. Make sure that all elements, such as buttons and the camera, line up with the slots on the cover. Lightly press the phone against the body and walk around its entire perimeter in this way. You will hear characteristic clicks. Ready! Now you know how to open the cover of a BQ smartphone without damaging the case and screen. If something is not clear, watch the special training video.
