And how to turn it on. However, sometimes users have another question - how to disable safe mode on Android. If you have difficulty returning the system to full operation, the methods presented below will help you quickly solve the problem.
Reboot
The easiest way to exit Safe Mode is to restart your device. When the necessary actions in Safe Mode are completed, press the power button and hold it until I exit. Select "Reboot".
The next time you start Android, it should load in normal mode, all applications will work, and no restrictions from Safe Mode will remain. On some Android firmware When working in safe mode, a special message appears in the notification panel. When you click on it, the device reboots, exiting Safe Mode. The next time you start it, you will be returned to normal Android operating mode.
Shutdown
If after rebooting you find that it was not possible to remove Safe Mode, try to get rid of it by turning off the device completely.
Several options can be used:
- Simply turn off the phone by holding down the Power key and selecting “Power off”. Wait 10-15 seconds and turn the device back on.
- Turn off your smartphone, then turn it on. When the logo appears, press and hold the Home button until full load systems.
- Turn it off, turn it on, and when the logo appears, hold down the volume down key. Hold until Android boots.
- Perform the same steps, just hold down the volume up key.
If these methods do not help, turn off the power to the smartphone, and then remove the cover and remove the battery. Wait 5 minutes, replace the battery and try turning on the phone again. Android should boot normally, without restrictions from Safe Mode. 
The choice of method depends on Android versions and the smartphone manufacturer. For example, to remove Safe Mode from Samsung devices, usually it is enough to simply reboot it without resorting to additional manipulations.
Reset settings
If you do not understand how the phone ended up in safe mode, and cannot turn off Safe Mode using the methods described above, then the only way to return the system to normal is to reset the settings. This is a last resort measure, which should be resorted to if the use of other methods does not bring results.
As a result of the procedure Hard Reset All data will be deleted from the phone/tablet, including messages, contacts and installed applications. Therefore, before resetting the settings, it is recommended to take care of creating backup copy. Hard Reset can be performed in two ways. First try applying a reset through settings:
If you can’t reset the settings through settings, use it to restore to factory state Recovery Mode. To start Recovery Mode, you need to turn off your smartphone and, when turning it on, simultaneously hold down the power button and the volume down/up key. Do not wait for the logo to appear, but keep the buttons pressed together immediately. On Samsung smartphones The “Home” button is added to the combination.
Not everyone knows that, like in Windows OS, there is a safe mode on Android devices. What is it and why is it needed, we will now figure it out.
Safe mode on Android is a mode that, when launched, only runs pre-installed system applications. Anything you downloaded and installed yourself will not function in this mode.
What is Safe Mode for?
For example, we installed a bunch of third party applications and one fine day the smartphone or tablet began to glitch, freeze, slow down and issue various errors. We start the smartphone in safe mode and remove all the “garbage” that could cause the device to become unstable. If this does not help, then we can make a diagnosis: a malfunction in the Android OS itself.
That is, safe mode is an excellent tool for diagnosing your device. Also, thanks to it, you can find out how much faster and better a “naked” Android works, not cluttered with various widgets, applications and other software products.
All manipulations will be performed with a device running Android OS 5.0.2
Enabling Safe Mode
Method one
Instructions:
1. Press the on/off button of your smartphone so that the menu appears.
2. Press and hold the "Power off" button.
3. Another window will appear in which we will be asked to switch to safe mode. Click "ok".
4. That's it. After rebooting we will enter safe mode. A corresponding message should appear at the bottom of the screen.
Method two
On at the moment There are various applications that make it easy and simple to enter safe mode. One of them is called "Quick Reboot". You can download it
Instructions:
Download, install and launch this application.
Go to the program settings by clicking the button of the same name.
Scroll down the list that appears, find the “Safe Mode” button and put a checkmark next to it.
We go back and see that a new item “Safe Mode” has appeared in the main menu of the program.
Click on it and confirm the reboot by clicking “ok”.
Another window will appear in which the program will ask for root rights. Click "allow".
The device will reboot and turn on in safe mode.
Method three
Another similar application is simply called "Reboot". It is similar in functionality to the previous version. You can download it
Instructions:
1. Download, install and launch the application.
2. After launch, immediately grant the program root rights by clicking the “allow” button.
3. In the main menu, select the “Safe Mode” item and click on it.
4. Confirm the reboot by clicking “Yes, reboot now.”
5. After rebooting we will enter safe mode.
Method four
This time we will use a program called Easy Reboot, which you can download
Turning off Safe Mode
To exit Safe Mode, simply reboot your device. After turning it on, it should work in standard mode. If any problems arise and after rebooting the smartphone is still working in safe mode, remove the battery, wait a minute and insert it back. This helps in almost 100% of cases.
If this does not help, then try rebooting your smartphone using a combination of the power button and volume + or volume -.
Conclusion
So we figured out what Safe Mode is and what it is intended for. Now, if your device is unstable, you will know how to diagnose the system yourself.
If you have any questions, write them in the comments to the article and we will definitely answer.
Due to the fact that everything more phones and tablets on Android platform started to completely unexpectedly switch to safe mode, many users are interested in how to disable safe mode.
In general, this very mode is needed in order to stop applications that are not working correctly.
But in some cases it turns on on its own, and turning it off is quite difficult. In addition, on the Internet you can find many ways that supposedly allow you to do this, but in practice everything turns out to be quite the opposite.
Therefore, we have selected five methods that actually work and disable safe mode on devices with Android OS.
1. Method No. 1. Reboot
In general, the device goes into safe mode due to some application not working properly, but rebooting often stops it from working and automatically brings the phone out of this mode.
There are several ways to do this.
You should not use them at the same time, because only one of them will work on your device.
This is what we are talking about:
- If in the menu that opens after swiping up there is an item “Turn off power” or something similar, click on it. After this, the device will be turned off.
- Hold down the keypad lock button and select “Shutdown” from the options.
After the phone is turned off, you should remove the battery from it and wait at least 30 seconds, then repeat all operations in the reverse order, that is, insert the battery and turn on the phone.
As for the above-mentioned 30 seconds, during this time the capacitors are completely discharged and the device begins to work as if anew, from scratch.
Some write that it is better to wait about a minute. Anyway, 30 seconds is minimum time, but you shouldn’t wait more than 5 minutes - there’s no point in that.
Note: If the design of the phone does not allow you to remove the battery, just wait a while after turning it off.
2. Method number 2. Alternative
This method does not work on all devices, so if it doesn’t work in your case, don’t despair, move on to the third.
And it consists of pressing and holding the power button and the button that turns the device volume down at the same time.
Below is an example of the location of these buttons on the phone Samsung Galaxy J7. Here on the right is the power button and on the left is the volume down button.
Important: This method should only be used in cases where the volume button is intact and undamaged. Otherwise, this combination will cause a cyclic (constant) reboot.
3. Method No. 3. Uninstalling apps
So, the phone can go into safe mode due to some applications, or rather, their incorrect operation, so this method looks quite logical.
And it consists of simply uninstalling all applications that you have recently installed.
To do this you need to do the following:
- Go to settings, then to “Applications”.
- Click on the right application. By default, they will be sorted by installation date, so you need to delete one of the first applications in the list.
- On the application page, click on the “Delete” button.
If deleting recently installed apps doesn't help, you might want to try deleting all the apps one by one until your device stops going into Safe Mode.
But in this case, a problem arises: not everyone wants to delete all applications, because important data may be lost.
Therefore, if deleting recently installed applications does not help, it is better to resort to the fourth method on our list, which is more radical.
4. Method No. 4. Reset your phone
This method is to completely erase all information from the device. Then the information that forced him to switch to safe mode will also be removed.
Most effective way to reset the phone looks like this:
- Reboot your phone and, when it just starts to turn on, hold down the volume down button. This will take him to the system menu.
- IN system menu You must select “wipe data/factory reset”. The choice in this case is made using the volume keys and the phone power button.
- In the next window, select “yes...”. Here is a simple question: “Are you sure you want to delete all data from your device?” We answer “Yes”.
- After this, the deletion will occur directly. Some time will pass, depending on the amount of information on the device. Then the system menu will appear again, which we saw from the very beginning. There you should select the “reboot system...” item. The system will reboot and start in normal mode.
Of course, we don’t want all the data to be lost from the phone, so before performing the above procedure, you need to save all your important documents somewhere.
It is best to use a regular computer for this - connect your phone to it via USB and reset all photos, videos, documents and other files.
The same can be done using any cloud storage.
There is no need to worry about purchased applications and progress in them, all this will be saved in Play account Market.
You will just need to install all the programs again.
5. Method No. 5. Using the Home button
This method also does not always work, but you can try.
It consists of rebooting the device and when it starts to boot, hold down the Home button and do not release it until the device boots again.
If this button is a touch button, hold it down as soon as it appears on the screen. If the reboot function is missing, simply turn off the phone and start turning it on.
The first method can be seen clearly in the video below.
Android devices go into special mode due to damage operating system or application crash. This is a download that starts the phone with only system applications. You can restore a frozen phone and clear your memory of unnecessary information. There are several ways to disable safe mode on Android.
Switching to the standard mode of the device becomes a difficult task at first glance. After the manipulations performed, not every phone is restored to its typical position.
Features of the condition
For experienced users computer system We know that there is a safe mode in Windows. However mobile device undergoes various states and goes into the same mode on Android.
Protective mode- this is an integral part Android systems, which helps in case of overload. Initially, the reason for the system boot switch is determined. This occurs due to a crash or serious application error. The user is faced with the task of how to exit safe mode on Android and restore the phone, saving all settings and information.
Some versions of the operating system send a notification to the user when the user enters a different state. Apps that are malfunctioning are a common reason why a device goes into security mode. To remove it, you need to delete recently downloaded applications.
There are several ways to turn off safe mode on Android. This means that if you follow the instructions and perform basic actions, there will be no problems with loss of information and files. In the gadget settings, a list of programs opens and in the downloaded tab they are deleted unnecessary applications. It is recommended to deactivate everything installed programs. Then the device reboots. Otherwise, other options are used.
System recovery methods
You can make sure that your smartphone or tablet is in a safe state by looking at the screen. An inscription about protective mode appears there. If there is no such notification in the corner of the desktop, the mode is disabled. In case of failure, the device must be rebooted.
In order to remove the protection mode, you need to turn off your phone or tablet and remove the battery for at least half a minute.
Then reinsert the battery and turn on the device again. After the manipulation, the Android system and phone work in normal mode, and all applications, contact details and other information are saved.
The downside is that it is difficult to remove the battery, so this option is not suitable for all devices. There are many other ways to exit Safe Mode. The Home button (on and off) is pressed while the phone or tablet is rebooting. However, for some reason, not all devices support this reboot feature.
You can turn off safe mode on your phone by pressing the volume up or down button. This option resets the settings to the original settings, so all saved information will be lost. All applications can be returned after the manipulations have been carried out.
Model specific procedure
There are several ways to disable Safe Mode on Lenovo. For example, remove the battery for a few minutes and install it again. The device must be restarted and at this time press the “Home” key, holding it down until it boots completely. After turning on the smartphone, press the volume down key. It is important to hold your fingers in this position until the device is fully loaded. Reboot Lenovo again and when turning it on, hold down the volume up button and hold until fully activated.
Disable Safe Mode on ZTE phone, Fly (Fly), Dexp and other models can be done in several ways. When an unknown program interferes with the normal operation of the device, you should not immediately give the phone to service center, if you can try to restore the work on your own.
Main stages:
You need to go to settings, select application manager and a specific object to delete. After removal, the phone reboots into normal mode. If despite all attempts to use various methods, the security mode appears again, then it is better to start again and reset the settings. Before returning the device to its original appearance, a backup copy of the data is created. The user goes to settings, selects backup and reset. After a reboot, the standard mode is restored.
The Hard Reset method is similar to resetting to factory settings, but this is done using the developer's method. A hard reset deletes everything from the smartphone, including cache and memory, which are not removed by a factory reset.
Hard reset (hard reset) cleans the phone, starting from the initial level. Security mode moves the smartphone or tablet to a safe area, and this property is used by developers and programmers to debug the application.
Other actions
A safe method is the system's response to errors or atypical encoding. In order to remove the device from emergency mode, not all methods help. It is important to prevent the resumption of this action.
Extreme measures
To save files and applications, files are backed up. Subsequent recovery will allow you to transfer data and contacts to the restored phone.
Saving information:
- Copying files to your computer.
- Save to the cloud on Google Drive.
- Export contacts to a file and save on your computer.
Another way is to turn off the power and press certain keys. The button combination depends on the device model. However, there is standard algorithm, used when normal debugging methods fail.
Key options for restoring your phone:
- Power and volume down button This option is suitable for LG (LG), HTC, Alcatel and Motorola models.
- Power and volume up + Home key (for Samsung).
After the recovery menu appears, use the volume keys (up, down) to select “Delete data and reset the device.” “Wipe data/factory reset” is pressed and activated by the power button. The decision is confirmed by clicking on consent. After a few minutes, the recovery is completed and the phone is activated.
They also use the notification panel. In some situations, you can turn off the mode by unlocking your phone and swiping down from the top of the screen.
Removing malware
Malicious code is the main culprit of system malfunction. Security mode is activated when the volume button is locked, and on Samsung the volume down button is locked. For example, when these keys are mechanically blocked by a case or other object, the protective mode is activated randomly. This reason is not a sign of a serious malfunction. You need to take the device out of the case, visually inspect the keys, press the volume a couple of times and make sure that they are pushed in without resistance, and reboot the phone.
When it turns on after installing the program safe way, act quickly. Suspicious objects that launch simultaneously with the operating system, for example, home screen widgets, are selected at random.
Then they launch the settings, the icon of which is located in the application bar. Another option is to launch the notification panel. Scroll down, select the application and open the page where the basic information is located. Some devices only support this feature after selecting "Application Info". Then press the delete key. If the application is system, then click the “Disable” tab. The final stage of the procedure is a reboot. The phone should turn on in its original mode.
If serious problems arise with software Natural loading of the gadget is disabled. Standard user applications and programs are blocked by the system for protection purposes or run in a limited version. Removing a safe state is not difficult if you know the basic methods.
An Android device can automatically enter a safe operating mode as a result of operating system failures or due to incorrectly functioning applications.
In this guide you will learn how to disable Safe Mode on Android in various ways.
Note. The effectiveness of the instructions in question depends on the type of mobile device (tablet, mobile), manufacturer (for example, Alcatel, Samsung, etc.), version of the operating system. That is, not all methods can be used on your device.
Method number 1: removing the battery
Attention! This method is only suitable for smartphones with a removable battery.
- Turn off your phone.
- Remove back cover housings. Remove the battery completely.
- Wait 1-2 minutes.
- Reinsert the battery and turn on the phone.
After these steps, the OS should start in normal mode.
Method No. 2: deactivation during reboot
1. Activate the system restart option.
2. Hold the Home button until the download is complete.
Attention! If your phone does not have a software reset command, turn off and then turn on the device using the appropriate keys.
Method number 3: changing settings in the system menu
Note. This method Disables can be used on selected mobile models from Samsung and Sony.
1. Run the Reboot command or turn off and turn on your mobile device.
2. While the system is booting, hold down the “volume down” key until the startup procedure is completely completed.
Attention! In some phones, instead of “volume down,” you need to hold down the “volume up” key.
3. In the system menu that appears on the display, select the “...factory reset” option.
4. Confirm the request that you want to delete all data. Under the question line “... of all user data”, select the answer “Yes”.
5. After cleaning is completed, use the menu to start booting in standard mode (reboot system now).
Method No. 5: for Samsung with a system no older than version 2.3
1. Perform a power cycle restart.
2. Hold the "Menu" button while loading.
Method number 6: removing programs
1. Uninstall recently installed applications from the phone memory through the “Settings” menu.
2. After uninstallation, reboot the system. If the activation of the mode was caused by “conflicting” software, the phone will automatically restore standard operation.
Successful and quick setup of Android OS!
