Each subscriber may need to activate a SIM card. As a rule, a new SIM card, or its duplicate, is activated automatically when installed in a mobile device. But, what if the system crashed and activation did not occur? There are several ways to independently activate the Tele2 SIM card.
How to activate a new Tele2 SIM card
Having purchased a new Tele2 SIM card, it must be removed from the holder and installed in the slot provided in the mobile device. After that, a notification should be sent to the subscriber's number that the SIM card is active. If this notification is not followed, then it will be impossible to call anywhere, the informer, configured automatically, will notify that the number is blocked. How to activate a Tele2 SIM card?
Subscribers will be able to call emergency services and a number created by the operator from a blocked number mobile communications to unlock the SIM card, it's 610. The call is absolutely free. After calling the number, you need to wait for the operator's answering machine to answer that the SIM card is active and the subscriber can use mobile services.
How to activate a duplicate Tele2 SIM card
Having lost a mobile device, or completely blocked the SIM card by repeatedly entering the wrong PAK code, subscribers who want to keep the current number must contact the Tele2 office to obtain a duplicate of their SIM card.
The duplicate will save the current balance, all previously installed services. How to activate a SIM card received again?
Upon receipt of a duplicate SIM card, the operator immediately activates it at the request of the client. If the subscriber for some reason refused the service, then he will be able to activate the SIM card on his own.
You need to call the operators at 611 (free of charge), dictate your passport data and ICC SIM card, which is registered on it right on it. Within a few seconds, the operator will activate the number automatically.
How to activate a blocked Tele2 SIM card
If the subscriber has repeatedly entered the wrong PAK code, the SIM card will be blocked. This method created to stop unauthorized access to the information stored in the SIM card. Unblocking the number in this case will not work, you can only purchase a duplicate SIM card.
If the number was blocked due to the subscriber's debt for mobile services, you can activate the Tele2 SIM card by replenishing the account. In this case, the blocking will be removed automatically.
The operator blocks the number if the subscriber does not use mobile services for 4 months. You can unlock the SIM card by calling 611 or by visiting the Tele2 office. You must have a passport with you for identification, or a power of attorney for permission to unlock from the person on whom the number is listed.
If the subscriber does not use the SIM card for more than 180 days, then the operator blocks the number by terminating the contract with the subscriber. In this case, it will not be possible to return the number, since it will be assigned to another SIM card, and another subscriber will acquire it when connecting to Tele2.
17.07.2018
Tele2 SIM card activation - why is it needed, how to do it on the phone, answers to these questions in the article. So, let's begin! To use the services cellular communication from Tele2, required active sim card. However, for many reasons it can be blocked. For example, in case of loss - in this situation, the operator provides the opportunity to make a duplicate that needs activation. Also, the activation of the Tele2 SIM card is needed when it is purchased and installed in the phone.
How to activate a new SIM card
Briefly on the topic
Instruction for everyone
You need to dial the number and wait for the notification, the SIM card is activated.
So, how to activate the Tele2 SIM card, depending on the reasons for blocking it? First of all, it should be noted that this procedure must be carried out very carefully, since in case of incorrect manipulations, the SIM card can be blocked.
detailed instructions
By purchasing a new SIM card with a number, you get a set of connections that needs to be activated. In order to be able to make calls, you need to go through an easy activation procedure, which includes the following steps:
- you need to remove the sim card from the package.
- you need to install it in your mobile gadget;
- turn on the mobile device and enter the Tele2 activation code - PIN code;
- this code is indicated on the plastic that remained after the removal of the SIM card. For convenience, the operator specifies standard code– 0000 (four zeros);
- you need to wait a while for the card to register;
- dial short number 610 and wait for a notification that the SIM card has been successfully registered on the Tele2 network.
After these manipulations, you can use cellular communications.
Sometimes the activation process can cause some difficulties: the card is not registered, the dialog box does not appear, and others. In order to quickly deal with this problem, you need to turn off the phone, check that the new SIM card is installed correctly, and then turn it on again and repeat the procedure. If nothing happens, it is better to seek help from professionals.
Important: if the process of activating the Tele2 SIM card causes any difficulties, it is better to apply with a similar request to the communication salon.
You may be interested to know, if so, then follow the link and read another article on our website.
A few important tips for subscribers:
- you must enter the PIN code very carefully, as it can be blocked and you will need to enter the PUK code;
- you can change the PIN code if you are sure that you can enter the PUK code correctly;
- activation codes should not be in the public domain. If you want to know how it is made in, read our other article.
How to activate a duplicate
Often, cellular subscribers are faced with such a problem as the loss or theft of a SIM card. In this case, the operator provides an opportunity for all users to purchase for 50 rubles a duplicate without an attached number. It is worth saying that this amount will be credited to the account immediately after the registration of the SIM card.
Steps for activating a duplicate:
Important: it is not carried out in all stores of the company, you need to check the addresses of the offices with the operator.
After this simple procedure, you need to install a duplicate on your phone, and you can use it.
You can also activate a duplicate at any Tele2 cellular department. To do this, the owner of the lost card will need to present identification documents.
How to activate a Tele2 SIM card if it was blocked?
It is necessary to do such a procedure, since attackers can take advantage of the funds in the account, as well as the opportunities provided by your starter pack. You can activate a Tele 2 SIM card after blocking it only if you buy a duplicate and register it on the network.
Cellular communication is more important today than ever, almost every resident of Russia has a mobile phone or smartphone. One of the most popular mobile operators in Russia is Tele2.
In order to actively use communication services, it is necessary sim card registration. This procedure is necessary in the following cases:
- At the time of buying new sim cards;
- When issuing duplicate issued due to the loss mobile device, or when the SIM card was damaged and stopped working;
- When blocking a SIM card for a reason theft or loss mobile device, blocking is carried out immediately, you need to contact the communication salon and report the problem;
After reading this article, each person will understand how to register a Tele2 SIM card.
AT this section represented by the most common causes errors faced by users. Most often it is possible to eliminate this problem.
- Error caused incorrect fixation of the SIM card in the slot, for this you need to turn off the device, put the SIM card back to sleep and turn it on;
- Contacts are dirty. This also often happens, for this you need to remove the card and wipe it with alcohol or water;
- It often happens that you just need restart phone;
- Broken slot. This problem is easy to identify: you need to insert a SIM card from another mobile operator, if it does not work, then the problem is directly in the phone itself and it needs to be repaired;
- Also, the SIM may stop working if it didn't work for a long time, each operator has a specific period of inactivity if it is exceeded, the SIM card will stop working, it is easy to solve the problem - contact the company's office and make a duplicate;
Registering a newly purchased SIM card
When buying a new SIM card, the seller can offer assistance with activation, this is at best. However, most often you will have to solve this problem on your own, in fact, there is nothing wrong with this procedure, and everyone will be able to cope with it, after which call services, the Internet and much more will be available, it all depends on the chosen tariff. There are several ways:
- The easiest way - phone registration. To do this, you need to insert a new SIM card into the slot of the switched off mobile phone or smartphone. After turning on, you will need to enter a password, which is indicated on the plastic base, usually the password is four zeros, if you enter the PIN code incorrectly three times, then you will need to enter the Puk code, which is also indicated on the base. That's why important after the purchase do not throw away this very foundation, if the pin code consists of four characters that are easy to remember, then the puk code is much longer. After entering the password, registration will take place on the network, in order to finally make sure, you can make a call to number 610, and the operator will report that the procedure was successful;
- If some unknown error occurred and registration failed, you can contact contact center Tele2, where experienced specialists will tell you how to quickly carry out this process. To do this, dial the number 610 , after that an answering machine will answer, which will offer several actions, you must select a connection with a consultant, after which he will tell you how to solve the problem. For this method you need an additional phone from which the call will be made;
- You can also contact official salon, it is not the most convenient and fast way, however effective. It is worth resorting to it when the above options turned out to be a failure, you should find the nearest office and go there with a problem. Required to apply the passport if the SIM card was bought in the name of the applicant, if it was bought in the name of another person, then you need to take it with you, these are the rules. After treatment, the problem is solved with one hundred percent probability, but its occurrence is very rare. This method is suitable for those who are not confident in their own abilities and are afraid to perform various manipulations.
Many people simply do not know how to activate a Tele2 SIM card, because if it is purchased in a specialized salon or another store, the sellers themselves perform this procedure after filling out the registration form.
But today a new starter package can be purchased on the Internet without overpaying money for it, because the balance usually contains an amount equal to the price of the SIM card that you bought.
Without activating the SIM card, the subscriber can only call emergency numbers, and other communication services are not available to him. In addition, this procedure is quite fast and easy.
On the box of the starter pack or on the plastic, there must be a number that must be dialed for activation.
Unpack the box, separate the SIM card from the plastic base. After removing the back cover of the case, insert the SIM card into the designated compartment. You may also need to remove the battery to do this (on some models).
After completing this simple procedure, you need to turn on the phone. It will immediately detect a new SIM card and network. The screen will indicate that only calls to emergency numbers are available.
Now pick up the plastic base from the card, and enter the pin code on your mobile in the field that appears. These four digits will be indicated in any starter pack and you need to enter them correctly, otherwise after three attempts you will have to dial the puk code so that the card is not blocked by the operator.
Now dial 610 and call him. You will be notified of a successful transaction. Congratulations! Your new SIM card is activated and you can tell your friends and family about your new number.
The phone by which the activation operation must be carried out must also be indicated on the plastic base from the SIM card that was in the box when purchased.
How to activate a tele2 SIM card yourself via a ussd request
Both to activate and block the operator's card using a request will not work. You need to either visit a communication salon to get help in this matter, or do everything yourself by dialing the short number 610.
But keep in mind that the Tele2 coverage map does not cover all regions, so there may be problems in some regions and areas.
Activating a SIM card through a service guide
If you have any questions regarding the balance, tariff plan and the cost of calls, SMS, Internet on the new Tele2 SIM card after activating it, we recommend that you solve them using the simple Service Guide service at * 111 #.
Activation in Branch Tele2
If you are not confident in your abilities, you should contact the Tele2 branch, where experienced specialists will not only be able to activate the starter package you purchased, but also provide other assistance: replenish your account, transfer funds to another number, find out tariff plan, change the tariff, activate services and packages of SMS minutes, traffic, disable them, find out about all the options activated on your number, control expenses by ordering account details, which is available for a period of 1 to 3 months.
By purchasing a new number at the Tele2 branch, you can be sure that the activation will be successful and you will be able to contact your loved ones and relatives after leaving the store.
Before use, any SIM card must be activated. The procedure is required in the following cases:
- buying a new sim card;
- unlocking;
- getting a duplicate.
For Tele2 subscribers, the activation procedure will take a minimum of time and provides for the ability to do this without leaving home. In this article, you will learn how to activate a Tele2 SIM card, not only a new one, but also a previously blocked one.
The buyer of a new Tele2 SIM card, along with the contract, receives a plastic card with a sim card and all the data on it.
To start using cellular services, you need to perform a number of actions:
- Remove the SIM card from the plastic base, insert it into the phone slot and turn it on.
- Enter a pin code if necessary (default is four zeros) and wait automatic detection Tele2 networks.
- Activate the SIM card by calling the operator's service by phone 610 .
The procedure is carried out in automatic mode, therefore, during a call, it is enough just to listen to the message of the robot about successful activation, after which the subscriber can fully use Tele2 cellular communications. A call to 610 is free of charge and can be made at any time of the day.
You can notify all callers about the new number using the free New Number service, regardless of which operator the subscriber used earlier.
Instructions for self-activation are indicated on a plastic base from the connection package.
How to get and activate a duplicate SIM card
If the SIM card is lost, the subscriber does not have to purchase a new number. It is enough to order a duplicate, to which it will be attached old number after activation. You can activate a duplicate Tele2 SIM card in 2 ways:
- By phone 611 . The operator will need to provide the ICC identification number indicated on the card and passport details. After successful identification of the client, the service specialist will bind the old number and inform about the possibility of further use of the services.
- At the company's office. You can activate a duplicate immediately after purchasing it through a point of sale specialist.
To purchase a duplicate, you will need a passport and a statement from the subscriber in whose name the service agreement is concluded. Activating the Tele2 SIM card yourself by phone is the easiest way.
Before ordering a duplicate, please check with help desk the nearest office where this is possible. For the restoration of the SIM card, you need to deposit 50 rubles, which will be credited to the balance immediately after activation.
How to activate a SIM card after blocking
Self-locking is necessary in case of theft or loss of the phone, especially if the card does not have a pin code. This is necessary to avoid unauthorized calls. You can order blocking at Tele2 customer service departments, through your personal account or subscriber service using free round-the-clock phones:
- 611 for Tele2 subscribers;
- 88005550611 for other operators.
Also, the SIM card can be blocked by the operator in the following cases:
- incorrect PIN code entry more than 3 times;
- non-use of the number for a long time.
If the phone is found, then you can restore the blocked Tele2 SIM card and reactivate it by calling the number 611 by providing personal data and a code word, or during a personal visit with a passport to the office of the company.
You can cancel the voluntary blocking in personal account in the "Tariffs and Services" section.
If there is no chance of returning the phone, then the only option to continue using cellular communications is to order a duplicate at the operator's sales offices.
