Devices designed to store various data are important components of any computerized system. Currently, magnetic hard disk drives (HDDs) are widely used. These devices are highly reliable, but, like any part of a personal computer, they are not immune to malfunctions and failures. In order to restore the operation of the HDD and provide this component with full service, there are many special programs.
Among them, HDD Regenerator took a worthy position. This is a very common and effective solution to a large number of hard drive problems.
HDD Regenerator: how to use
This application is very easy to learn and use. This software tool is designed to resuscitate damaged HDD sectors and restore the surface. A characteristic feature of the program is special principle of coating reversal, on the basis of which the software operates.
The application also has a nice interface and convenient controls - there are no complex add-ons or menus with a large number levels, and the commands for activating certain options are clear to any user. However the regenerator has many advantages and functions. We will not consider in detail all the advantages of the program, but will analyze only the main use cases that are most popular among computer users.
So, HDD Regenerator for hard recovery disk is often used in the following cases:
In addition to a wide “range” of options, the developers also included several activation options in this application, - The “regenerator” operates purely on physical level , therefore it has no dependence on the version and type of OS. Installation, launch and use are possible in Windows environment, and when activating the program from a disk or flash drive - in DOS mode. This point should be discussed in more detail.
Launch methods
Windows
Launches from a flash drive
It is immediately worth noting that starting the program from USB storage device is only appropriate in situations where hard drive severely damaged or the only one. In addition, using a flash drive is also useful for those users who often repair different PCs. So, to make a bootable flash drive, you need to do the following:
- Launch the program and click on the “Bootable USB Flash” item.
- Choose a specific one USB device and click on “Ok”.
- After the bootable USB drive is created, restart your computer.
If you need to do boot disk, then in the program you should click the “Bootable DVD\CD” button and select the recommended burning (writing) speed in the window that appears.
How to use HDD Regenerator 2011
Detection of BAD-blocks
Scanning and troubleshooting
- Click on the item “Normal Scan...”.
- Next, click “Scan and repair”. This mode performs in-depth scanning and recovery of faulty units.
- The scanning range is determined using the arrow keys.
- After pressing the Enter key, the procedure itself begins.
- Blocks that have been successfully restored are highlighted with a green R.
- You can exit the application using any button on your PC.
Restoration using magnetization reversal technology
- Click on the “Normal Scan” item, and then on the “Regenerate all sectors in a range” button.
- Next you need to determine the range of blocks.
- The recovery is started using the C button on the computer keyboard.
As a conclusion, it is worth saying that resuscitation hard drives information using HDD Regenerator is available to all computers user and does not require special knowledge. It should be remembered that any work related to software repair and maintenance of the HDD requires maximum care and attention. I hope that this HDD Regenerator manual will be useful to you.
HDD Regenerator instructions
HDD regenerator is software product designed to work with hard drives, namely restoring their damaged sectors.
This program has the ability to work with hard drives both in the Windows operating system and under operating system. By running the program on any personal computer, the first thing she will ask us to do is create copies of it on a bootable USB flash drive, or on a boot disk.
And so open the “Regeneration” menu item and select “Run process under Windows”. In the window that appears, we need to select the hard drive with which we will work.
Before starting work, you need to close everything active programs, their operation can restrict access to the disk and block the operation of the HDD Regenerator itself.
If you did everything correctly, a Dos window will open in front of you in which you will be offered four operations to choose from:
Carry out diagnostics and then restore damaged hard sector disk;
Carry out diagnostics and upon completion show only their results;
Carry out regeneration of damaged sectors, having previously indicated from which and to which point;
Show statistics (in case the program cannot diagnose)
To save time, it is recommended to use the second point (to do this, between the square brackets near the word “Choice”, enter the serial number of the menu item and press “Enter”) to find out exactly where the damaged sectors are located.
This is done in order to select the next point from which point (range with damaged sectors) to carry out restoration. Having indicated it, also press “Enter”
After the restoration process is completed, the program will show us information about the work performed and its results.
The hard drive is not a permanent component of a computer system. Unfortunately, sooner or later it fails. The reason for this is demagnetization, which causes bad sectors to appear. But what to do to extend, or even completely restore, performance? hard drive? According to many experts, one will help with this simple program, that’s what we’ll be talking about today. To be more precise, the article will tell you how to use HDD Regenerator 1.71, but it’s worth clarifying right away that the guide is also suitable for other versions of the application.
Testing
You might be interested in:
Since the developers of the program position it as a means of recovery bad sectors hard drive, then it would be reasonable to start the article on the topic “How to use HDD Regenerator” directly with this function. However, it would not be entirely correct to do this, because there can be many reasons for a drive malfunction. It is for these purposes that software There is a S.M.A.R.T testing function. This is one of the most reliable disk diagnostic systems, so it is recommended to use it before starting to “repair” the drive.
As a result of a fairly lengthy analysis, the program will show you the status of the hard drive. If no problems are identified with it, then you will see the inscription “OK”. If it is different, then you can be sure that the problem lies in bad sectors and you need to use the option to restore them.
Disk recovery
We will continue the guide on how to use HDD Regenerator 2011 directly from main feature program - the ability to restore bad sectors of the hard drive. In fact, this procedure is quite time-consuming, so be patient and do not miss anything.
Once you have completed all the steps described above, a recovery progress indicator will appear on the screen. It is with its help that you can track how many bad sectors were detected and how many of them were recovered. All that remains to be done is to wait for the scan to complete.
Creating a bootable USB flash drive
From the guide on how to use HDD Regenerator, you already know how to recover bad sectors. This is the main function of the program, however, not the last. With it you can create bootable USB flash drive, so that in the future you can download some program onto it to run it directly from the drive.
It doesn't last very long. Immediately after completion, the program will notify you about this, after which you can copy the program to the flash drive to launch it from the BIOS.
Creating a boot disk
Instructions on how to use HDD Regenerator would not be complete if it did not tell you how to create a boot disk. In general, this operation is not much different from the previous one, but to complete the picture we will talk about it in detail:
Now you fully know how to use HDD Regenerator. Of course, there are several more items in the application that were not discussed, however, they perform a mediocre role.
Conclusion
So we figured out how to use it HDD program Regenerator. As you can note, despite the fact that the developers position it as an application for restoring the functionality of the hard drive, it also contains other no less useful features. You can easily use it to create a boot disk, flash drive, or test the drive. In general, the program is very useful and it is recommended to install it on your computer immediately so that you can influence the operation of the computer at any time.
We will tell you about in a simple way, how to recover damaged sectors using the HDD Regenerator program from Windows 10 and previous versions.
This version of HDD Regenerator can recover bad sectors (bad blocks) from under Windows any version and bit depth. The program makes it possible to work with several hard drives simultaneously, as well as with portable USB drives.
Recovering a hard drive using HDD Regenerator
Attention: Connect drives that need to be restored only after loading the Windows operating system and do not use them while the program is running.
The first thing you need to do is HDD Regenerator, run the program as an administrator and, by clicking on the “Regeneration” menu, select “Start Process under Windows” from the list (run from Windows)
If the program asks you to switch to “IDE mode” and reboots, then click the “No” button, since your Windows system may not start in IDE mode.
Then a new window will appear with a text menu for the HDD Regenerator program. Using the number keys we will select the necessary actions. Select 2. “Normal scan” and press “Enter”
In the next window we are asked to select the operating mode of the program. We are interested in “Scan and repair” (scan and restore). To do this, select item 1 and press “Enter”.
In the next window, select “Start Sector 0” (start scanning from the very beginning of the disk), press 1 and then “Enter”.
After these steps, the disk scanning and recovery process will begin. Red letter " B"The damaged sectors will be marked with a green letter " R“Recovered sectors will be marked, and sectors with a read or write delay will be marked with a white letter “D”.
After scanning, you will be shown a window with the results of the work: the number of damaged and restored sectors, as well as sectors with delays.
Important:p take care of uninterruptible power supply the computer on which you will restore data.
HDD Regenerator is excellent at recovering bad sectors on hard drives, but we strongly recommend that you save all valuable information from the recovered hard drive and do not use it in the future, since it may fail at any time.
The official website of the program is located.
23.03.2017
Information storage devices are the most important components of modern computer systems. Today, the largest distribution among various devices, intended for storing data, received HDDs - hard drives magnetic disks. These devices are quite reliable, but, like any other PC component, they are not immune to sudden failures and breakdowns. To maintain and restore HDD performance, as well as prevent information loss, many software. Among them, HDD Regenerator occupies a worthy place - an effective and popular solution to many hard drive problems.
Application of HDD Regenerator
HDD Regenerator is a very easy to learn and use application designed to recover bad sectors of hard drives and regenerate the surface. The developers are especially proud of the special surface magnetization reversal algorithm, on the basis of which the program operates.
The application is notable for its simple interface and the control method - there are no complex settings, multi-level menus and switches; the commands for launching are simple and understandable even for a novice user.
In fact, the list of features and benefits of HDD Regenerator is quite wide. We will not delve into listing all the advantages of the application, but move on to the main methods of application that are used by a wide range of users.
So, in most cases the program is used:
- To quickly diagnose the hard drive and identify errors, as well as bad sectors (BAD-block);
- For deep scanning and detection of all possible problems with the surface of HDD, as well as their elimination in automatic mode;
- For complete surface regeneration using a special magnetization reversal algorithm.
In addition to the variety of functions, the developers have included several launch methods in the program - HDD Regenerator works at the physical level, so it is independent of the type and version of the operating system. Launch and operation is possible in a Windows environment (XP, Vista, 7,8,10 are supported), and when booting from a USB Flash or CD - in DOS mode. Let's look at this in more detail.
Launch options
Method 1: Windows
Method 2: Bootable USB flash drive
Running from a USB drive is justified if the disk being restored is the only one in the system or is very damaged. In addition, a recovery flash drive can be useful for those who often diagnose HDD faults on different computers. To create a bootable USB Flash with HDD Regenerator 2011, do the following:
To use USB Flash as a disk recovery tool, your PC must be configured to boot from a USB drive. How to do this is described in detail in the article on link .
Method 3: Bootable CD/DVD
If the PC used for diagnostics and disk recovery does not have the ability to boot from a USB drive, it is advisable to use a bootable CD/DVD with the program. We create it by analogy with a flash drive.
Regardless of the chosen method of launching the program, further work with HDD Regenerator 2011 and performing most operations are no different from the user's point of view. The only difference between the methods is that when running from under Windows work happens in the window:
And when loading from a flash drive or disk - through the DOS interface:
At this stage, the preparatory procedures can be considered completed; we proceed to direct work with the program.
Use Cases
Method 1: Diagnosis and quick identification of BAD-blocks
Method 2: Full scan and removal of identified hard drive problems
Method 3: Regenerating the disk surface, including “healthy” sectors using a magnetization reversal algorithm
In conclusion, it is worth noting that restoring the functionality of hard drives using tools such as HDD Regenerator 2011 is available to a wide range of users and does not require an in-depth study of the principles of operation of complex electronics. It should not be forgotten that carrying out procedures related to the maintenance and software repair of HDDs requires care and precision.
