What does the fault look like?

Why is this happening?

• liquid ingress;

Smartphone overheating

Spontaneous discovery

fb.ru

What to do if a yellow spot appears on your phone screen?

The number of malfunctions in mobile gadgets is growing in proportion to the emergence of new technologies. Competition is recognized as the culprit of this trouble, because in the race for success you cannot hesitate, otherwise another company will take your place in the sun. As a result, developers do not have time to test devices properly, and imperfect smartphones end up in the hands of consumers.

Problems can vary: from serious ones that impair the performance of the device, to minor ones that spoil the aesthetic component. One of these problems is the yellow spot on the phone screen.

What does the fault look like?

More than half are not insured against this problem modern smartphones. Most often it is mentioned by users of devices from well-known brands: Apple, HTC, Samsung (less often than others). But when used for a period of two years or more, such a defect can appear in any brand of device.

A yellow spot on the phone screen can be anywhere, so it is recommended to carefully inspect the gadget when purchasing. It is worth remembering that most often this malfunction is visible on a white background, for example, if the search results. The intensity of the defect varies: sometimes it looks like a slight darkening on the display, closer to a brownish tint, but there are also very bright spots, as if oil or glue had been spilled under the glass.

Why is this happening?

If a yellow spot appears on your phone screen, there are several reasons:

• falling of the device from a great height;
• a strong blow to the case from the side or directly to the display;
• long exposure to direct sunlight;
• liquid ingress;
• strong heating from an external source (stove, fire, battery, etc.);
• the same as in the previous paragraph, but due to the fault of a faulty battery or processor.

All these factors can cause the transistors of some pixels to fail. Because of this, the latter stop working correctly, producing various effects: from colored or duller areas to a “gasoline” rainbow on the display.

There is no need to despair; at this stage, this can still be corrected.

How to remove a yellow spot from your phone screen?

Attention! The methods described below are not suitable if the gadget malfunction was caused by mechanical damage. In this case, only a complete replacement of the display will help. It is produced either independently or at any service center, so there is no need to worry too much about this.

So what to do in other situations? Unfortunately, there are not many options.

Smartphone overheating

If the defect is caused by high temperatures, you should try to cool the device. To do this, you will need to turn off the device, put it in a sealed bag and... place it in the refrigerator. No, this is not a joke on inexperienced gadget owners! This method really helps, but there is one caveat: the temperature in the chamber must be no lower than +8 degrees Celsius.

You need to keep your smartphone cool for only 10 minutes. It is then removed and left to “warm” at room temperature. The next time you turn it on, the yellow spot on the phone screen should disappear.

However, from the secondary appearance of the defect this method doesn't save.

Spontaneous discovery

If the gadget has not been exposed to high temperatures, you can try another method. This will require special program(like ScreenFix Deluxe only for smartphones), which triggers a high-speed change of pixel colors in the desired area. Sometimes this helps remove the yellow spot on the phone screen, but not in case of a factory fault with the display.

Then all that remains is to contact the warranty service or service center.

aikido-mariel.ru

Reasons for the appearance of spots on the screens of smartphones and tablets

Have you ever noticed strange spots on the screen of your smartphone or tablet? The appearance of any spots or streaks on the device screen indicates a malfunction of the display module. Today we will talk about the reasons for their appearance.

Problems with the backlight

Moisture

Quite often, moisture penetration into the device causes stains to appear. The backlight of LCD displays consists of films, an inverter and lamps. The LEDs shine on the side of the plate, and the films scatter the light, forming a uniform backlight on the screen.

If liquid penetrates between the layers of film, they stick together. Where they touch, the light is refracted at the wrong angle and a spot appears on the screen.

The “wet spot”, as a rule, has an irregular shape and is characterized by increased brightness. At different angles of inclination, the spot will change its shape or will not be noticeable at all.

If your device has an AMOLED display, then you have no reason to worry. Such screens have a different backlight technology. If a small amount of liquid gets inside the device, a stain will not appear.

If you have problems with your iPhone's backlight, you can replace it. You can purchase a new display backlight here.

Factory defect

A stain due to a manufacturing defect occurs during display assembly and is often similar to a stain caused by moisture. The manufacturer may incorrectly select the length of the screws, which is why they rest against the back of the display and lead to the films being compressed together.

Such a spot has an oval shape and does not change at different angles. By the same principle, stains are formed from foreign objects, such as sand.

Local overheating

Local overheating occurs in devices in which the manufacturer has not installed the correct heat sink. In the place where the device overheats, the films are deformed from constant exposure to high temperature. Once the smartphone or tablet has cooled down, they no longer accept original form and a spot forms at the point of overheating. Most often, spots from overheating appear at the ends of the display and have a yellow tint. This spot is darker in the middle and lighter towards the edges.

Overheating spots do not change shape from different viewing angles and may become stronger over time.

Malfunctions LED backlight most often manifested by the appearance of a local black spot or deterioration of the backlight as a whole. The spot forms where the LEDs fail.

Repairing the backlight is a rather labor-intensive process and takes a lot of time. If the backlight of a smartphone or tablet is broken, it is recommended to replace the display module.

Display problems

Broken display

After a fall or impact, the image disappears on some part of the screen - this is a sign broken display. A spot of this origin most often has an irregular shape, cracks may spread from it, and if you press on it, its size may increase, and its shape may also change.

Display controller not working

Using this microcircuit, which is located on the cable, the transmission of the image to the display is controlled. The controller breaks due to mechanical impact, that is, from a strong fall or impact. It can also be damaged by liquid.

If the controller is damaged, the image may disappear altogether: the screen becomes completely white or black. But most often, when the controller breaks, multi-colored vertical stripes appear. If you press on the screen, the stripe configuration will change.

It happens that the image may disappear only in one place on the display. Such a spot will have clear boundaries, and the rest of the screen will display a normal picture.

Pay attention! If the backlight disappears on both the screen and the buttons, the problem is most likely with the board.

Dead pixels

If a small dot of red, blue or green, that means they appeared dead pixels.

A dead pixel is a separate element that loses the ability to change its color.

Manufacturers often indicate the quality class of monitors based on the permissible number of dead pixels.

There are 4 classes in total:

Ⅰ - there are practically no dead pixels. If a dead pixel appears, the manufacturer undertakes to repair it under the terms of the warranty or replace the display; Ⅱ - the presence of 2 defective pixels (white or black) is allowed; Ⅲ - the presence of 5 white, 15 black and 50 colored dead pixels is allowed; Ⅳ - 50 white, 150 black and up to 500 colored dead pixels are allowed.

It is worth noting that the quality class of the display directly proportionally affects the price of the spare part. The higher the quality, the more expensive the display is.

Display and touch screen sticking together

Today, the problem of display and sensor sticking mainly occurs in budget smartphones.

In inexpensive models, there is an air gap between the display and the sensor. When the space between the display and the sensor is reduced, they can stick together and remain in this state for a long time.

The bonding stain can be easily recognized. It is noticeable when the display is turned off and may partially disappear when the backlight is on. It looks like liquid squeezed between glass. When faced with such a problem, users often think that water has entered the device. It is possible to remove such a stain, but to do this you need to re-glue the touch screen.

Module delamination

Delamination in the display module is a type of defect that is classified as a manufacturing defect. A sensor that is poorly glued during the manufacture of the module eventually begins to lag behind the display around the perimeter. As a result, white spots appear. This defect is extremely rare. In this case, the display must be replaced under warranty conditions.

If any stain appears on the screen of your device, contact a specialized service center. It is almost impossible to replace or repair damage to the backlight or display module at home. For repairs, you must use special equipment and have certain skills in repairing equipment.

If you know which specific part needs to be replaced, you can purchase it from our website. To find the right spare part or find a replacement, we recommend reading our article.

Natalia Zinko

all-spares.ua

Yellow spot on a smartphone screen - how to remove it?

Over time, users of smartphones and tablets experience the problem of white and yellow spots appearing on the display. This problem is common among budget gadgets. Typically, spots on the display appear after 6 months of use. mobile phone. Many people wonder: how to remove a yellow spot on a smartphone screen? This problem can be corrected if you can determine the cause of the problem. And we will help you understand it in this article.

Moisture

Is pretty common cause the appearance of white and yellow streaks under the gadget’s display. The backlight of LCD screens consists of films, light bulbs and an inverter. LEDs display light on the side of the smartphone, and films distribute light across the entire display, forming a uniform backlight.

If water appears between the film layers, they stick to each other. At the point where they are connected by liquid, the light is distorted and a spot appears.

Important! As a rule, such a “watery spot” has an irregular shape and is too bright. If you tilt the phone at different angles, the speck will take on different shapes and may be completely invisible.

If the device has an AMOLED display, there is no need to worry. It has a completely different structure, and if a little liquid gets under the screen, the speck will not appear.

Factory defect

The speck may appear as a result of improper assembly of the smartphone. This defect is very similar to liquid getting under the display. The master chooses the wrong length of the screws and they rest on the films, squeezing them together. The speck has a rounded shape and does not change at different angles of inclination.

Overheating

It often occurs in gadgets in which the manufacturer did not initially install a heat sink or did it incorrectly. In a place where the smartphone overheats, the films change their shape through exposure to high temperature. After the phone or tablet cools down, a noticeable spot forms.

Important! Most often it is yellowish in color, the color varies depending on the location of the spot. If it is located closer to the edges, then it is light. And if closer to the center, then the spot is dark yellow. Often, over time, the spots darken.

LED backlight malfunction

If even one LED stops functioning, a noticeable yellow spot may appear on the screen.

Battery swelling

The battery plays an important role in the operation of a phone or tablet. If you find even a slight swelling of the battery, you should replace it immediately.

Important! Repairing the backlight of a smartphone is a rather labor-intensive and expensive process. If such a problem is detected, experts recommend replacing the screen module.

Let's look at a few basic ways to combat yellowness on the display:

• Phone firmware update.
• Replacing the display module.
• Replacing the temperature sensor.
• Coating with a cooling solution (applies to the inside of the plastic).
• Applying an ice cube to the yellow spot.
• Replacing a smartphone battery.

Important! It is best to contact a specialist at a service center. This will give guarantees quality repairs smartphone screen. A qualified specialist will not only repair the faulty display, but will also explain the cause of the malfunction, and also give recommendations on the correct operation of the gadget.

Often, with the help of such an application, the phone is checked immediately upon purchase for the presence of suspicious spots on the display. And if a speck appears while using the gadget, then just install the application, launch it and select the “Fix” setting. Then put the phone on charge and wait for the morning. As a rule, all screen defects disappear in the morning.

1. Case - it is advisable to purchase waterproof protective cases for your phone, as they can prevent liquid from entering the body and screen of the gadget, and also protect against scratches and chips.
2. Protective film or shockproof glass - protects against mechanical damage and scratches on the display.
3. Do not carry your mobile phone with keys or change, as chips and cracks may appear on the case. This trouble can only be avoided if your phone has a protective case.
4. Temperature. Cold is the worst enemy of any mobile phone, since at low air temperatures it quickly discharges, and at times even reboots. If the gadget is discharged in the cold, then when you come home, give it time to warm up a little, only then put it on charge. If you start charging the device immediately, condensation will form on the smartphone chip, which can lead to short circuit and phone breakdown.

Compliance with the above simple tips can extend the “life” of your mobile phone.

• Use a microfiber cloth to gently remove dirt and dust.
• Before cleaning, please read the operating instructions for the device. As a rule, it should describe in detail how and with what to remove dirt from the screen.
• When cleaning the display, it is advisable to turn off the device.
• Use special means(polishes or wipes for touchscreens).
• Apply the liquid cleaner to the cloth and only then to the display.

Proper cleaning of the screen will not only ensure a beautiful appearance your device, but to some extent can prevent the appearance of yellowness and white spots.

With the problem of a yellow spot appearing on the screen Android smartphone many have encountered. It usually looks like this - after a year of using the smartphone, a small yellow spot begins to appear in the center of the screen, which begins to grow over time.

I will say more, the stain can be not only yellow, but also white. Spots of other colors are practically never found, with the exception of burnt-out pixels in LCD matrices.

Why did the yellow spot appear?

The first reason is matrix burnout. This is what owners of inexpensive, budget smartphones. Unfortunately, in order to save on production and cost, a low-quality display is often installed in a smartphone, which fades over time.

The second reason is overheating of the display. This is especially often the cause of yellow spots on the display for those who like to play games on a smartphone.

The third reason is the glue between the touchscreen and the display. Not all smartphones have this glue, but it can turn yellow over time and thus you will have a yellow spot.

The fourth reason is moisture. Moisture can get under the glass of the smartphone, after which a stain begins to appear. It is usually a white spot with ragged edges.

And the last reason is the transformation of the display due to strong pressure on the smartphone screen.

The most interesting thing is that all smartphones suffer from the problem of stains. There are cases where even iPhones had yellow spots. I have yellow spots appearing on my smartphones - Huawei Honor 4C, Meizu M2 Mini and on Alcatel Scribe HD.

By the way, most Chinese smartphones, such as Xiaomi, Meizu, Huawei this problem appears after one to two years.

What is the most common reason?

In 90% of cases, a large yellow spot appears in the center or white spots along the edges of the display. If this is your case, then the reason is that your smartphone is overheating. I wrote above that spots often appear on those who like to play, but this is partly true. If your smartphone often overheats and you don’t play games, a stain may appear.

The second common reason is a manufacturing defect. Smartphones are extremely complex devices, just like computers. Everything is complicated by the fact that the layout of the elements in the smartphone is extremely cramped, for example, if the battery puts pressure on the screen, you will have characteristic spots. If you notice a swollen battery (for example, your case has begun to diverge), change it immediately.

The most important thing is to check your smartphone right at the time of purchase. Be sure to check your smartphone display in a dark room!

I'll tell you an incident from my life: in 2013 I bought myself HTC phone 8S, which turned out to have a defective screen. In particular, due to the LCD display, dead pixels appeared on it, which are visible only in a dark room and against a black background. From here, draw the conclusion that you need to check your phone in a dark room and on a dark screen and on a light one.

Can I remove a stain from the screen myself?

The most important thing is not to believe that programs like Dead pixel detect fix will help remove the yellow or white spot. A yellow spot is a display defect that appears as a result of overheating and can only be removed in one way - by replacing the screen. The Dead pixel detect fix app will not help you.

You can verify this by reading the reviews of people who tried their luck with this application:

Remember! There are apps like Dead Pixel Detect that are great for testing your screen. The application launches different colors on the screen, thereby you can see whether there is a problem with the display or not.

Also, cooling your smartphone will not help you. By the way, as a result of cooling, your battery, which does not like low temperatures, may also fail.

And the craziest advice you can find on the forums is to reset the settings, update the device and change the battery. But the problem is not in the battery or in the firmware. The problem is in the display. Such advice will not help you!

Is this a warranty case?

It must be remembered that each case is individual. For example, you were using your smartphone carefully and a yellow spot appeared. If you have not passed the warranty period, which is usually one year from the date of purchase, then feel free to take your smartphone to the store where you bought it or to an authorized service center for repairs.

If I were you, I would immediately take the smartphone to an authorized service center. The address of the service center is usually on the warranty card. You can write your city in the comments, I will help you. Why to the service center? The girls in the store will dissuade you, say that this is not a warranty case, and so on.

But there may be another case, you dropped your smartphone and appeared The stain is the result of mechanical impact on the screen. It all depends on the service center, but in most cases, after diagnostics, the device will be returned to you. Remember, traces of mechanical damage are very clearly visible, these are chips, abrasions, cracks.

They can't refuse you for warranty repairs directly in the store. Warranty repairs are refused by the service center, but not by the seller, who at least does not have the proper competence.

What to do if your smartphone is not accepted under warranty, but you want to have it repaired?

Take your smartphone to a service center in your city. I have learned from my own experience that if a yellow spot appears on the screen, it cannot be removed and in any case the entire display module will have to be replaced. If 3-4 years ago anyone who could hold an instrument in their hands could change the display at home, today this is extremely complex operation because of huge amount glue.

I hope my article helped you. If you have problems finding a service center or display, then write in the comments. I will definitely help you!

Today our site will talk about simple ways remove stains from tablet screen.

What to do if it appears?

In the century modern technologies and development touch screens common problem image defects appeared. Either someone was persistently pointing his finger at the screen with all his might, or the factory worker was not performing his duties in good faith, or maybe it was due to an accident, like the device falling. One way or another, if you have a smudge on your tablet screen, don’t worry, there are a few simple and effective ways correct the current situation. Just check first if you have removed the screen, because maybe it’s just an air bubble that’s bothering you. If A white spot appeared on the tablet screen Contact the service center immediately and find out the causes of the problem.

If the tablet is functioning properly, but the stain on the screen looks like oil, that is, like when you press on an LCD monitor, it may be a factory defect. Are there ways to fix this disease yourself? Of course there is. Such a marriage sometimes occurs among Galaxy Tab 10.1, so don’t be discouraged, now we will tell you a secret way to fix the situation.
As funny as it may sound, turn to your freezer for help. Or rather, what is stored in it. Anything will do, as long as it’s cold, even a pancake with meat, even a piece of ice. Just be sure to put what you choose in a bag, otherwise you risk damaging the tablet even more, because frozen food has a tendency to thaw. Next, apply the ice pack to the stain and leave for 15 minutes. Once you remove the source of the cold, you can watch the irritating spot disappear.

Some experts recommend the simplest method - you need to take a suction cup, attach it to a spot on the screen and simply pull it to the side, to the very edge, where it will no longer interfere with the eyes and finger or simply go out of sight.

An effective way to remove stains is by heating. This method will help you if the cooling option only worsened the situation and increased the size of the defect. You just need to heat the “injured” area. The easiest way to do this is with a hairdryer, that is, with hot air. The process may take some time, perhaps not even five minutes, just periodically give the device a break, do not heat it too much, who knows what could be damaged or melted, because there are so many necessary small parts inside. Once it cools down, you may see the stains on your tablet simply disappear and you will be filled with joy.

How to remove a stain from a tablet display

Well, the easiest way, which does not require any additional artifacts, is simple pressure; you only need your magic hands. You need to put pressure on back cover exactly on the side where the spot is on the tablet screen, directly on the spot, only from the back. In this case, your palms should very tightly grasp the display along the edges of the device. Press on the stain for a few seconds and release. If you see that the spot has somewhat decreased in size, then continue rhythmic pressure until the screen begins to delight you with pure shine and smoothness.
As you can see, there is nothing difficult in eliminating some problems at home using improvised means that anyone can find. Depending on the reaction to a particular action, you can choose the option that suits you, and it will shine again. If none of the described methods suits you, then you will still have to contact a service center, where they will definitely help you fix everything and explain the cause of the defect. But statistics say that in the vast majority of cases, problems of this kind can be corrected independently using available means. Enjoy your device and never give up. If so, then it’s worth finding out the cause and fixing the breakdown.

Spot on tablet screen repair video

Warm greetings to everyone! Now there will be a short note, so to speak, hot on the heels. Today, one of my acquaintances turned to me for advice, and the question itself was quite simple and at the same time unusual. Why unusual? Because they mostly ask about, etc. And here it’s a real surprise!

As you already understood from the title, the essence of the problem comes down to the fact that a person presses the display of his iPhone and gets multi-colored spots at the points of contact, which disappear without a trace after a few moments. Is this the norm or not? And if not, then why is this happening? Now let's quickly figure it all out - let's get started!

So, we have two options for the development of events:

1. The appearance of streaks when you press on the screen is quite normal.
2. Horror, it shouldn’t be like this, what kind of nonsense is this?!

Moreover, both versions have the right to exist. And here's why...

Click on iPhone display- you get a stain. Why might this be so?

Because you don’t have to press with all your might :) Indeed, this is a common property of liquid crystal (or whatever they are called correctly - I’m not a big expert) screens. Try applying pressure (just don’t overdo it!) on the display of your TV, other phone, tablet, or other devices. Will there be waves and streaks in the places where you press? Certainly!

So the iPhone is no different from similar gadgets - its matrix will react to strong pressure in exactly the same way - with the appearance of small multi-colored spots. Naturally, all this happens if you press with a certain (above average) force. And of course, this “effect” disappears almost immediately - which is quite normal.

But here's what you need to remember...

Sometimes, the screen can be too sensitive - streaks will appear even with a “normal” touch.

And this is already bad. Because using iPhone similar situation It becomes simply impossible. What could be the reason? Everything is correct - low-quality components and spare parts. Let me remind you that it is impossible to buy the original display separately (unless it was removed from another iPhone) - Apple simply does not sell them. All that exists on the market are spare parts from other manufacturers, and they can be very different: from the “worst” (which “float” even at the slightest contact) to “almost the original”.

Unfortunately, my friend was unlucky - he bought a “makeshift” restored iPhone, which was installed with a simply disgusting screen. If you touch it and do not press very hard, then stains and stains immediately appear on it, which interfere with the comfortable use of the device.

What can be done about all this?

1. Perhaps, as a temporary measure, a glass sticker will help.
2. Well, in an amicable way, we need to change the display.

This is such a sad story... if you have anything to add or ask, be sure to write in the comments!

Common problem mobile devices– a yellow spot on the phone screen. It can have different shapes and sizes, but, as a rule, it starts with a small yellow spot in the center, which then spreads over the entire area. The characteristic color is visible all the time, no matter what image is on the display. Where did it come from and what to do with it?

Origin of the defect

As of 2018, the origin of the “yellow spots” is no longer, pardon the pun, a blank spot on the map. If a yellow spot appears on your phone screen, the reasons may be as follows:

• Systematic overheating of the device. If you like to play resource-intensive games mobile games or you often run heavy applications, you probably felt the case getting noticeably warm in your hand. The consequences may be visible.
• Matrix burnout. This is usually what users of Chinese phones and other public sector phones encounter. Manufacturers install inexpensive matrices, which, alas, are short-lived. This is how a factory defect manifests itself.
• Aging of glue. In displays without an air gap, the matrix and touchscreen are connected by a layer of glue. Ideally it is transparent, but in real life it begins to turn yellow over time.
• Moisture penetration. In this case, the color of the stain is often white, and it appears at the edges, where it is easier for liquid to penetrate.
• Increased pressure on the display. Alas, this weakness is inherent in absolutely all models from all manufacturers - from basement offices to Xiaomi, Lenovo and even Apple.

What to do

Unfortunately, nothing can be done about the problem at home. If a yellow spot appears on the smartphone screen, it means it’s time to take the device to a service center and change the matrix. It won't be cheap, but it won't be as expensive as a new smartphone.

It is not so difficult to detect a yellow spot on a smartphone screen as to remove it after it appears. Applications like Dead Pixel Detect are well suited for early diagnosis (if you suspect something is wrong). However, they are unable to fix the problem.

Follow popular advice (put the device in the refrigerator, reflash it, or make full reset) is also not worth it. Changes occur on physical level, and they are irreversible.

Is this a warranty case?

As we have already written, the reasons for the appearance of a defect are different. If the stain is the result of overheating or mechanical pressure, then there is no question of any warranty repair or replacement. Unless you bought special insurance that gives you the right to free service for some time.

Sometimes it really is a factory defect. But most often, manufacturers of such devices do not have a developed network of official or authorized service centers: these are the most ordinary “basement Chinese”, it makes no sense to contact them with a guarantee.

In rare cases, when yellowness appears as a manufacturing defect in models from a famous manufacturer, you have a chance of getting a warranty replacement. But there is little chance of this. Therefore, most likely, you will have to change the matrix on a general basis.