Hello everyone, dear lovers of iOS gadgets. Today we will touch on the topic - like (4s, 5, 5s, 6) or iPad (2, 3, 4, Mini). To reflash means to update or reinstall the operating system on iOS device. The process of updating a mobile iOS gadget may be needed if various problems from iPhone (4s, 5, 5s, 6) or iPad (2, 3, 4, Mini). Reflashing can solve some problems if your gadget is unstable.
This is done very simply, all the work happens in three stages:
. At this stage, you will need to select and download the file with the required firmware version for your iPhone (4s, 5, 5s, 6) or iPad (2, 3, 4, Mini). In principle, you can: either install an updated version of the operating system or (but not too old). I want to say right away that return iOS old version(older than iOS 7) will not work, because Apple has stopped signing and activating earlier versions of iOS.So, let's take a closer look at each of the above points..
Downloading the firmware file
First, let's move on to downloading the file with the firmware version you need. This is very easy to do, follow these steps::
- Go to www.getios.com. In the “Your device” field, select the name of your device.
- In the second step, you need to select the device model. To select, use the drop-down list called “The Model”.
- In the third step, you need to select the version of the iOS operating system that you want to install on your mobile gadget iPhone (4s, 5, 5s, 6) or iPad (2, 3, 4, Mini).
- Next, click the “Download” button. The file with the firmware will begin downloading; the file size, depending on the selected version of iOS, can take up several gigabytes.
Save the downloaded file with the operating system to your desktop or to a folder in which it is convenient for you to save.
Setting up iTunes to work
Before you proceed to flashing your device, you need to download, install and configure iTunes:
- First of all, follow the link - apple.com/itunes/download and download latest version iTunes programs. Run the downloaded program file and install the program.
- Connect your gadget to personal computer With via USB cable. Launch iTunes.
- In the side menu (if the side menu is not visible, you need to press the key combination CTRL+S) in the “Devices” field, select your gadget, previously connected to a personal computer.
Before you start flashing your gadget, I recommend making a backup copy of your operating system settings. To do this you need to do a few simple steps:
- Connect the gadget to your personal computer using a USB cable.
- Launch iTunes (if the program does not start automatically after connecting) and in the side menu (if the side menu is not displayed, you simultaneously press CTRL+S) select your iPhone (4s, 5, 5s, 6) or iPad (2, 3 , 4, Mini).
- Go to the “Browse” tab, find the “Create a copy now” button and left-click on it.
In the next step we will go to the lesson and try to reflash your gadget.
Flashing
Go to (4s, 5, 5s, 6) or iPad. To do this, follow these steps::
- Hold down the SHIFT key (if you have Windows) or ALT key (if you have a Mac) and left-click on the “Restore iPad” button.
- In order to reflash the device, in the window that opens, select the previously downloaded file with the firmware.
After the above steps, the update process will begin. software on your mobile gadget iPhone (4s, 5, 5s, 6) or iPad (2, 3, 4, Mini).
After a certain amount of time, the process of flashing your iPhone or iPad (2, 3, 4, Mini) will be completed.
That's all for today, I hope this short note helped you and you were able to reflash your mobile gadget iPad (2, 3, 4, Mini) or iPhone (4s, 5, 5s, 6) without any problems. If you have any problems flashing your gadget, you can describe your problem in the comments to this post. In order to be able to leave comments you need to log in. social network VKontakte.
They don’t even pay special attention to modifying the operating system that is installed on their device. However, for others, it is vitally important to update iOS to the latest version in a timely manner, or try beta versions and return again to proven, reliable software options. It is for such people that the instructions are intended, telling how to reflash the iPad without harming the device itself.
In order not to harm the iPad when flashing the firmware, you should follow the instructions
Before reinstalling the operating system, you need to create a backup copy of the files stored on the iPad. Don't worry - this does not necessarily mean that you will have to restore all the information by downloading it from your computer - this situation is more of an unpleasant exception than the rule. However, sometimes all the data stored on the tablet is actually lost. Agree, it will not be very pleasant to lose your music collection, messages in personal correspondence and other valuable information. To prevent this from happening, just connect your iPad to home computer, then open the iTunes program and in the corresponding menu subsection.
When you just want to update iOS to the most current version, you should learn how to flash an iPad without iTunes. After opening the menu, go to settings and select the main section. You will be interested in the second line from the top, called “Software Updates”. If an updated version is available that is compatible with your iPad, there will be a checkmark in this line inviting you to go to this menu item. Will open new screen, in which you will be shown the number of the proposed version and a single button, clicking on which will launch. After making sure that your Internet connection is stable, click on the button and wait until all the basic necessary actions are completed automatically.
Connect to the computer
Despite the development wireless technologies, is not available everywhere yet, so you should also know how to flash an iPad via iTunes. Open the program and connect the tablet to the computer via a standard USB cable. Be careful: the tablet must lie on a flat surface so that during data loading it does not turn off spontaneously, leading to serious errors. Go to the main section of iTunes and find the instruction current version iOS installed on your tablet. IN next line it will be written which new version you can install. If there are no problems, click the “Update” button and wait for the installation process to complete.
If specified number operating system does not suit you, you can download a specific version yourself. Take a good look at back cover iPad, find the digital model name and download iOS for such a tablet from the Internet using trusted sites or file-sharing systems. The iPad can be downloaded in ZIP format. If you had to deal with this, you definitely need to rename the file, giving it the “.ipsw” extension. With iTunes open, find the Update button again, but this time hold down the Shift key if you are using , or Alt for MAC-based operating systems. A dialog box will appear that will prompt you to find the firmware file yourself, and then determine its version and specify consent for installation. By the way, this option is suitable for installing beta versions of iOS.
Using recovery mode
It happens that the given tips on how to flash an iPad do not work. In 1-2% of cases, the program displays a message about a certain error and aborts the installation. It is necessary to use a more advanced OS installation method, which requires restoring the tablet using . First, you should fully understand how to activate this mode in order to carry out all the necessary procedures.
So, turn off our iPad completely, place it next to the computer and press the “Home” button. After about 5-7 seconds, carefully connect the USB cable, which will cause the iTunes logo to appear on the display, below which there will be a plug and an arrow. This means that you have entered the mode correctly iPad recovery, you can pay attention to the computer screen.
When you launch iTunes, you will see a window with a warning sign, which will mention the iPad going to . Once you click OK, you will notice a Restore button. After clicking it, the latest available version of the operating system will be installed on the iPad. If you want to decide for yourself which iOS number you will use, hold down the Shift button (or Alt for MAC) and feel free to click the mouse to open a dialog box.
Video on how to reflash an iPhone or iPad:
The updated firmware will reset the iPad to factory settings and deprive you of all the information that was on the tablet. This will come in handy here backup, the creation of which was mentioned in the initial section of this article. After iOS installations you will be able to choose which version of the backup to use. By the way, if you need to get a completely clean iPad, for example, before selling it on the secondary market, you can refuse data recovery and continue further work with factory settings.
The most serious flashing mode
The iPad manufacturer has also provided the ability complete shutdown software and installation in this mode of an updated modification of the operating system. This method is called DFU (device firmware update). It must be used in the following cases:
- When the error appears during installation in recovery mode.
- When the device has been jailbroken, causing it to freeze during the update.
- When you interrupted the OS installation by disconnecting from the Internet or computer and .
The instructions for activating the mode are somewhat more complicated than the previous one. After connecting your device to your computer, open iTunes, click on long time iPad power button and select the “turn off” menu item that appears. To understand how to reflash an iPad, hold down the power and “Home” keys at the same time and count down 10 seconds. Then release the power button, but continue to hold the second button for about 15-20 seconds until the computer screen displays a message about connecting a new device. Don't be scared of black blank screen iPad - This is normal for DFU mode.
The device screen must be blank while DFU mode is running. Further, all procedures will be completely similar to those described above when using the standard iPad recovery mode. Similarly, select a file to restore the operating system or agree to install the latest available iOS version. The data is also not saved - you will have to use a previously created iPad backup.
Safety when flashing
Now that you've learned how to flash an iPad, don't hesitate to use the information you've learned. The manufacturer has provided enough effective protection tablets from accidental software failures and intentional damage. Almost any problem can be solved by restoring the device using the above. The only real threat when flashing an iPad is the loss of personal data, which can be previously saved in a backup copy.
Of course, disconnect the USB cables, Wi-fi routers and other devices that are used to change the version of programs are not worth it - minor problems may arise. It will be much worse if you drop the iPad directly during the recovery process: if the socket for USB cable It’s definitely not possible to complete the process before repairing the tablet. In addition, I would like to recommend that you first study information about the version of the operating system that you are planning, because some may make it very difficult to return to previous modifications.
Simple or difficult?
In fact, installation in the described recovery modes is practiced only by a few users who are very well versed in modern electronics, including tablets. Most people (about 90%) use updates through iTunes or directly by iPad connections To wireless communication. They are good because they do not require any unnecessary actions and allow you to simply follow the proposed procedures without allowing any deviations. But recovery mode or DFU makes it possible to bypass some restrictions and errors that are insurmountable for iTunes in its normal state.
Restoring an iPhone is a standard return operation Apple smartphone back into working order after various failures. Unsuccessful firmware, incorrectly executed jailbreak, incorrect iOS update– if you know how to restore an iPhone, you can eliminate almost any malfunction that arises during the operation of this device.
Recovery procedure
To restore your iPhone, you need to enter recovery mode ( Recovery Mode). It's easy to do:
When the iPhone is ready for the rollback and error correction procedure, click the “Restore” button. 
iTunes will find it on its own current version firmware and install it on the smartphone, returning it to the state in which it was immediately after purchase.
Working in DFU mode
If in Recovery Mode iPhone recovery does not work, you need to enter the device into DFU mode. This mode is used when there are software errors - for example, when the iPhone does not turn on. DFU mode works at the hardware level, so it helps to reset all settings even in the most difficult cases. To enter DFU mode:
- Connect your device to your computer.
- Press and hold Power and Home for 10 seconds.
- After counting to 10, release Power while continuing to hold Home button.
It's difficult to enter DFU mode the first time because nothing changes on the screen. If recovery mode detects itself iTunes icon, then in DFU the phone does not seem to turn on. Therefore, you need to look at the computer screen where iTunes is running. As soon as the iPhone enters DFU mode, a notification will appear in iTunes informing you that the program has detected the device in recovery mode, and you need to reset all settings and content to continue working with your smartphone. 
If you need to install another firmware, hold down Shift and click “Restore”. An explorer will appear through which you need to specify the path to the previously downloaded firmware.
Recovery without a computer
If the computer is not at hand, it does not turn on, or you cannot connect your iPhone to it, then try resetting all settings through the device settings. As a result of this operation, you will get a clean smartphone without settings and user information, so be sure to make a backup before resetting. If the smartphone turns on normally:
Optionally delete user files. If the iPhone turns on, then you can troubleshoot its operation simple reset settings. In this case, the user’s personal data will remain intact.
Recovery after reset
If you need to restore your iPhone after resetting all settings and deleting content, you won’t be able to do this without a backup copy. The presence of a backup file with information stored in the device’s memory is the main point that needs to be checked before performing a reset. After restoring the iPhone to its factory state, all personal data of the user is erased from it.
Creating a backup before resetting:
After the reset, the iPhone will be like new: no content or settings will remain on it. To get all the information back, you need to connect the device to your computer and restore from the backup via iTunes. Choose the most recent backup, as it stores the most current information. 
You can also restore all settings after a reset via iCloud, provided that you stored backups on the cloud. In this case, when setting up iPhone you need to select the “Restore a copy from iCloud” option and specify a suitable backup.
Problems during recovery
If after normal recovery the phone does not turn on, then it makes sense to put it in DFU mode and try to restore it through iTunes again. This time you should not trust iTunes: download official firmware and select it in the Explorer window by holding Shift and clicking on the “Restore” button. 
Sometimes the TinyUmbrella utility helps solve the problem that the smartphone does not turn on after resetting the settings via iTunes. This program has an “Exit Recovery” button. If the iPhone does not turn on after recovery, you need to select it in the TinyUmbrella window and click “Exit Recovery”.
A smartphone is an integral part of the life of a modern person, and when it breaks down, many people find no place for themselves. Then questions begin to arise, how to reflash iPhone and this is quite real. Most users will not bother solving the problem and will simply go to the service center; for a few simple manipulations with the gadget they will have to shell out a round sum of money.
Why reflash your iPhone?
Quite often the cause is a simple failure of the iOS operating system. Despite the general resistance of the OS to harmful influences, breakdowns still occur. Most often, the reason is the user, especially if he uses jailbreak and installs various pirated content.
Another likely situation is the desire to update iOS to more new version, and other methods do not work. You can simply reflash the device and get rid of the pain. The procedure is performed in reverse order even more often when the user is somewhat disappointed with the new version and wants to return to the previous one.
The smartphone refuses to turn on or turns off/freezes during the boot phase. Perhaps the reason is not in the OS, but it’s worth checking this option first.
How to reflash an iPhone yourself? Preparation
It’s worth mentioning right away that the instructions on how to reflash an iPhone 4 are also valid for all other models and have no significant differences. The first step is to prepare the ground for replacing the system and download the firmware itself. Please note that it comes in .ipsw format, if another is present, then it may be a virus (except for the archive or image).
The firmware should be selected individually, and here there is a dependence on the iPhone version. It should also be taken into account that the smartphone is shipped worldwide, and the network in different countries may differ, so choose a typical OS with GSM or CDMA, otherwise there may be problems.
Among other things, the firmware version indicates the product model, series is general information, they are further subdivided into other categories. You can find out the model by turning the phone over, there is a technical information. After the word Model there is an alphanumeric code.
Now you should find the firmware itself, start your search with reliable sites, of which there are many on the Internet.
Flashing is not possible if the device tracking function is enabled on the smartphone, otherwise iTunes will display a corresponding error. In this case, you should go to the website https://www.icloud.com/#find, log in and disable the functionality.
The next preparation step is checking iTunes versions, it must be new, otherwise failures or errors may occur, and sometimes the process simply refuses to start. Typically, the version is checked automatically when the application starts.
You can flash your iPhone in several ways, using RecoveryMode or alternative option- DFU mode. The first option is to restore the system in case of failures, an emergency mode to return the device to normal operation. DFU Mode is very similar to the previous option, but it allows you to perform firmware not through the OS, but as if bypassing it. The function accesses the firmware, which allows you to perform the procedure when activating the jailbreak. Also used as an alternative to the first option if it did not help.
How to flash iPhone 5 RecoveryMode?
Let's look at how to reflash iPhone 5 yourself, that is, without contacting a service center. This instruction assumes the completion of the previous preparation stage.
- Turn off the device;
- Hold Home and connect iPhone to PC;
- The computer must independently detect the device and that it is in RecoveryMode;
- Launch iTunes if you have not already done so;
- If a window appears asking you to restore the gadget, confirm it. If a characteristic reaction does not occur, you need to go to the program and select the iPhone;
- Next, hold down Shift (Windows) or Alt (Mac) and click on “Restore iPhone”;
- Using Explorer, you must specify the previously downloaded firmware with the .ipsw extension;
- The procedure is automated and does not require user participation.
How to reflash iPhone 6 DFU mode?
To perform firmware flashing in all Apple gadgets, you must activate DFU Mode. Apart from the method of going to the menu, the procedure has most of the same points.
- Connect to the PC and disconnect the smartphone;
- Now press Home and Power at the same time, holding for approximately 10 seconds. After this, release Power and hold the second key until the iPhone reacts appropriately;
- Launch iTunes and select the device, then “Restore iPhone” while holding Shift or Alt;
- Specify the location of the firmware file;
- Wait until the end of the procedure and start the smartphone.
Now you can evaluate whether it is worth overpaying, quite a lot, for such a simple procedure, considering that in service center it will be done exactly the same. Even flashing it yourself the first time does not cause any significant difficulties, and subsequently it is completed in 20 minutes.
If you still have questions on the topic “How to reflash an iPhone yourself?”, you can ask them in the comments
if(function_exists("the_ratings")) ( the_ratings(); ) ?>
There are several ways to update iPhone firmware, iPad or iPod. All these devices operate using the iOS operating system, which is often modified by Apple specialists. The firmware can be updated in several ways, if you don’t know how to update iOS, check out all the methods and choose the one that suits you best:
- Update firmware from the device itself, without a computer
Today we will update the firmware of our iPhone without a computer, that is, from the phone itself. If you have a player iPod touch or iPad tablet, then you can also safely use these instructions for updating without iTunes. All firmware updates are located on Apple servers, so to use this method we will need access to the Internet. Access must be stable, so we will use a Wi-Fi access point.
Before updating the firmware, iPhone users (iPod and iPad do not count) need to make sure that the phone works with SIM cards of any operators even without any unlocking means (for example). Attention - if the iPhone is locked to a specific operator, then you cannot update using this method.
There are cases when, after updating, all data from the gadget is erased, therefore, if the device has information (contacts, SMS, calendar entries) that cannot be lost, then before updating the firmware you need to create an iPad or iPod. To save photos, music and applications, you can check out.
There is no valuable information in our experimental phone, so the backup copy iPhone we don't need it. We decided to update firmware version 6.0.1 to the recently released iOS 6.1 to fix a small bug, the fact is that the iPhone does not remember Wi-Fi networks, to which it connected previously, so you have to enter a password each time, perhaps after the update the Connection Confirmation function will start working.
Before proceeding with the steps to update the iPhone firmware, put it on charge and connect the phone to a Wi-Fi wireless network. If you still don’t know what Wi-Fi networks are and how to connect an Apple device to them, read the article - “ " If the device is connected to Wi-Fi, then:
1. Launch Settings, go to General and select the Software Update section
2. Apple iPhone looks for updates and tells us that a new iOS 6.1 firmware is available. Here you can see the improvements and bug fixes of the new version by clicking the More details button. We click the Download and install button. Read the terms of use and click the I Accept button.
3. The gears are spinning, iPhone started loading new firmware version 6.1, now you need to wait, it all depends on the speed of your Internet. We monitor the download level of the iOS firmware using an indicator and a time countdown. If you did not put your iPhone on charge before starting the update, then this warning may appear stating that at least 50% of the battery charge is required to update the iPhone firmware.
4. After the phone has downloaded the firmware, the Install button will appear, click it and the iPhone will begin updating the firmware on its own. The screen goes blank, a bitten apple appears and an iOS update progress indicator appears.
5. As soon as the firmware update process is completed, a window will appear with iOS settings 6, drag the slide and click the Continue button to complete a few more steps. The interface with settings is reminiscent of the one that runs when you first start your iPhone, iPod or iPad.
6. The iPhone again prompts you to connect to a Wi-Fi network to set up iCloud and services, we skip these steps and click Continue and Next. operating system thanks you and informs you that the iPhone is configured, all you have to do is press the button - Start using iPhone and start using it.
Today we learned how to update firmware on iPhone over a Wi-Fi network without iTunes and without a computer. Our phone began to remember Wi-Fi networks, so we no longer have to enter the password for the ones we already knew each time wireless networks. Well, all the data - contacts, music, videos, applications and SMS messages remained in their place. But if you also decide to update the firmware of your iPhone or iPad, then always save important data.
Happy updates!
