How to log into the mts 4g modem. Connecting an MTS modem

Using USB modems is easy and simple. Installation of drivers and software occurs automatically after connecting the modem to the computer and takes a minimum of time. Ingoda, however, some user participation in the process is still required. But first things first.

Remove the cover from the modem and install the SIM card into the slot. Close the lid and plug the modem into the USB port of your computer.

The operating system should automatically detect and recognize the new device and begin installing drivers. All information is displayed in the taskbar in the form of pop-up messages.

After installing the drivers, the software installation will begin. When the software autorun window appears, launch the installer wizard by clicking the “Run AutoRun.exe” button.

If the installation wizard does not start automatically, locate the AutoRun.exe file and run it manually. To do this, open "My Computer" and the CD drive with Connect program Manager stored on the modem's flash memory and double-click AutoRun.exe.

In the installation wizard window that opens, select the desired language, click “Ok” and follow the installer’s instructions.

Once the installation is complete, launch Connect Manager using the desktop shortcut. A few seconds after launch, the program will record the presence of a signal. Pay attention to its strength, characterized by the indicator in the upper right corner of the window.

For some modem models, the signal strength depends on their orientation in space. If the signal is not strong enough, you can try connecting the modem via a cable that allows you to change the orientation of the modem. After each position change, it takes a few seconds for the modem to display the signal strength corresponding to the new position.

All necessary USB modem settings are set by default. To access the Internet after launching the program and detecting a signal, you only need to press the “Connection” key in the “Connect” menu. The connection setup is accompanied by a melodic sound signal and the appearance of graphical display of traffic.

For manual settings modem, you need to open the “Settings” menu. In the “Network” option you can set the network and signal format – EDGE/GPRS or 3G. By default, network and signal selection is set to automatic. To set the parameters manually, you need to click on the name of the network (MTS RUS 3G in the picture) right click mouse and select the “Manual” option. After this, the signal will be scanned and a list of all networks detected by the modem will be displayed. All that remains is to select the required one (MTS RUS 3G in our case) and click “Select”.

In the “Operations with PIN” option, you are prompted to enter a PIN code. By default it is not required.

In the “Modem setup” option, you set the APN access point (internet.mts.ru), dial-up number (*99#), password (mts) and login (mts) for the connection. The password and login fields can be left empty.

In addition to the “Connect” and “Settings” options, the program also contains the “SMS”, “Balance” and “Calls” options. From the Calls menu you can make voice communication. To do this, you will need a headset with a microphone and headphones or speakers with a microphone.

From the “Balance” menu, the current balance is checked. To do this, click on the “Check Balance” button.

In the “SMS” menu, you can send and check incoming SMS.

Some additional settings modem can be configured in Device Manager. To do this, open the “Control Panel” and launch the “Device Manager”. Right-click on the modem (in this case ZTF Proprietary) and select “Properties”.

On current time hard to imagine cell phone, which does not provide access to the network space. In addition to the smartphone, mobile internet is also available for other devices, including personal computers and tablets. Connection to the World Wide Web occurs through special equipment - a router or USB router. How to set it up correct operation? In this article we will analyze in detail all the ways to connect an MTS modem to a laptop.

How to connect to PC

To use mobile Internet on a personal computer, you need to purchase the appropriate equipment - a USB modem or router. It can be purchased at any MTS store or at partner organizations. We recommend purchasing devices only from licensed locations. There are various device modifications available to choose from, which are designed for specific data transmission standards - 3G or LTE. If necessary, you can place an order for home delivery.

The gadget's starter kit comes with an instruction manual and a driver disk. It is no larger in size than a regular portable memory card, which greatly improves transportation when traveling. How to connect an MTS modem to a computer? Proceed according to the instructions:

Windows 7, 8, 10

If you purchased a 4G modem from the company Mobile Telesystems, you must install the appropriate software on your computer. To do this, follow the algorithm:

In some cases, difficulties arise: the desktop computer does not see the connected equipment. To correct the situation, do one of the following:

Now run mobile application"Connect". In the main menu, select a section network settings. Here, set the high-speed data transfer standard that your equipment supports - LTE, 3G, 2G.

After that, go to the access point setup tab. In this menu you need to enter email address APN – “internet.mts.ru”, contact number for connection – *99#, as well as account name and password – mts.

Reboot your system. An Internet connection indicator should appear in the main application window.

Windows XP

The setup instructions for the modem in this case are completely identical, as in the previous paragraph for Windows operating systems above version 7. Connect the gadget to your laptop and activate the utility. The differences are only in the location of the main controls.

Attention! The USB modem only supports MTS SIM cards.

If you have a router at home that provides wireless connection with the World Wide Web, you can connect a USB device to it and distribute mobile Internet. An important condition success is the presence of appropriate USB port and in the router case. To connect, perform a number of settings:

Attention! If the equipment does not meet the requirements, change it or software.

Installation on a tablet

Not everyone knows that a modem device can be used on a tablet computer. The connection procedure is quite complicated and may not always be successful. First, you should check whether the equipment is compatible with this mode of operation. Most modern tablets only come with a micro USB connector, so you won't be able to directly connect these two gadgets. A special adapter cable can solve this problem. If everything is done correctly, the 4G or 3G indicator should light up on the device’s display. After this, write down the characteristics of the access point. Set your email address – “internet.mts.ru”, telephone number- *99#, as well as name and code - mts. Now you can use mobile Internet on your device.

Unfortunately, sometimes the tablet sees the modem as unknown equipment or mistakes it for another module. To fix this problem follow the instructions:

How to use the application

To enter the Internet space, the provider has implemented special utility"MTS Connect". This application has the following functionality and characteristics:

The main window of the program displays the exact balance status at the current time, as well as the amount of available traffic in the billing period.
If the established limit has come to an end, you can activate renewal services and expand the standard set to the required volume.
You can receive and send messages in any direction of communication.
Voice communication management.
The ability to timely replenish your personal balance using a bank card.
Monitoring and regulation of data transmission speed.
The interface is made as simple as possible, all the main controls are displayed on the desktop.

Attention! Not all brands and models of modems support the listed characteristics and capabilities.

To activate the connection, you will need to click on the “Connect” button.

After a few seconds you can consume network resources. The main menu displays:

SMS – for writing and reading messages.
Challenges. Making a call or typing USSD commands.
Settings. Changing device operating parameters.
Balance. Displays the current account status.

The modem is easy to use.

Possible problems

Not everything is so smooth and simple, let’s consider possible problems and pitfalls:

Consumers often complain that the application consumes a lot of resources and slows down its performance. To solve this problem, we recommend closing all third party programs and windows that are not currently in use.
There are many problems with the utility in the operating room Windows system 10.
Many subscribers are not satisfied that only an MTS SIM card can be used in the modem device. This deficiency can be corrected by updating the hardware. The provider does not recommend doing this in order to avoid permanent breakdown of the gadget.
Please note that MTS does not guarantee that the actual speed corresponds to the declared speed. 3G and 4G performance can be affected by many environmental factors, uneven terrain, weather conditions and user location.

The article examined effective ways install an MTS modem to a computer or tablet device. The procedure may take a long time. If you cannot set up the equipment yourself, please contact consultants at technical support“0890” or at any operator service department.

Now, in order to have access to the World Wide Web, it is not necessary to tie your gadget with wires to a specific location. The MTS television system makes it possible to connect to the internet via a modem without using a fiber optic cable. In this review we will look at all the ways to connect an MTS modem to a laptop or PC.

Connect the MTS modem to a computer or laptop

After purchasing a USB device, a logical question arises: how to connect an MTS modem to a computer or laptop.

To set up MTS Internet, you need to do the following steps:

turn on your PC or laptop, insert the device into the appropriate USB connector. As a rule, the SIM card is already inserted into the modem. However, if this is not the case, implement it into the device properly;
Then the system will automatically install the necessary drivers, after which the corresponding icon will appear on the taskbar.
click on the icon that appears and complete the installation process;
After completing the task, the “MTS Content” icon will appear on the PC screen. This completes the setup process;
in the future, to access the Internet, you just need to click the shortcut and press the “Connect” button.

In principle, connecting an MTS modem to a device with any OS is identical. However, there are still some differences.

Let's look at how you can configure an MTS modem on Windows 7. By the way, the settings will be similar if Windows 8 is installed on your PC.

Algorithm of actions:

Connect the USB device to your PC and wait for the drivers to install. After installing the required software, a corresponding icon will appear on the desktop.
Next you need to set the necessary parameters. To do this, click on the icon and follow these steps: “Properties”, then “Advanced”, and enter the following initialization values: “AT+CGDCONT=1”, “internet.mts.by”. Save your changes.
Next, go to “Start”, then “Access and Network Control Center”, then “Setting up a connection via phone”.
IN last tab enter the following data:

the name of your USB device;
Network name "MTS GPRS";
USSD for dialing * 99 # (the command can be checked with your provider);
username/password – mts.

After entering the data, click “Save”. If all the data is correct, the “MTS Connect” icon will appear on the desktop.

In case of any failures or malfunctions, adjust the adapter parameters. To do this, follow these steps:

Go to the activated connection, select the “Properties” tab and check the TCP-IP protocol. Here, check the boxes next to the following values:

Default IP ID;
auto obtaining DNS servers;
canceling the use of remote network gateways;
disable autocompression of IP protocols.

Save the changes and restart your PC.

After these simple steps, the MTS high-speed connection should work.

The sequence of manual USB configuration for the corresponding software is the same as in the previous case. The difference may only lie in the design of the interface. Otherwise, the control panel is no different here.

In the previous case, we looked at the algorithm for turning on the MTS Internet on Windows via a USB port. Let's find out how to turn on the Internet via bluetooth adapter. If such a module is on your device, you can configure the MTS Connect modem drivers as follows:

Turn on Bluetooth on your laptop and smartphone, and synchronize the device data;
Next will happen automatic installation drivers, and the “MTS Connect” icon will appear on the desktop.

Subsequently, you will be able to access the Internet by clicking on the corresponding icon.

You can also install the MTS modem on your tablet. Both 4 and 3G networks are suitable for this. Automatic installation this method does not assume, so docking of USB ports will have to be done manually:

Connect the devices using OTG wire. Immediately after this, the “3/4G” shortcut will appear on the main screen.
Then click on the “Settings” column and set the APN. To do this, select " Cellular network", then "APN";
In the last tab, set the following values: Name – “internet.mts.ru, call request – * 99 #.
After saving, restart the tablet and use MTS Web access at your discretion.

If your tablet sees a USB device in CD-ROM format, do the following:

Connect the modem to the PC, then download and activate the Hyper Terminal utility;
Launch the application, go to the router, enter ate 1 in the “Code” column, AT^U2DIAG=0 in the “Value” column and save.

After that tablet computer will function correctly.

How to connect a modem to a router?

Routers were originally designed to connect to the Internet. Not all of them are able to work in tandem with USB from cellular providers, even if they have the appropriate port.

Advice! Carefully read the characteristics of the device before purchasing. Pay special attention to its synchronization with other devices.

To solve the problem, follow these steps:

Plug USB into the dedicated slot.
To enter the router menu, enter the password “192.168.0.1” in the line of any Internet browser.
Once in the menu, install the provided drivers. Connect to 3 and 4G networks.
Create an internet access point (APN) by specifying the following parameters: phone number * 99 #, name and address write “internet.mts.ru”.
Set up an automatic connection to the Internet.
Save the changes and restart the equipment.

After these simple manipulations, you will be able to distribute mobile Internet.

Pay attention! On many USB devices, the necessary settings for various television systems are already installed and do not require manual activation.

The reasons for the lack of the Internet may be:

lack of funds or GB on the user’s balance. In this case, it is enough to simply top up your account, or buy the missing GB;
The laptop or PC is faulty, or there are special settings on the equipment. A qualified programmer will help you fix the problem;
Incorrect data is specified in the network settings parameters. To resolve the issue, double-check the correctness of the data and try rebooting the device;
technical work on a cellular line (happens extremely rarely). Turn on the Internet for others cellular devices. If there is no high-speed connection there either, to clarify the situation, call toll free number 0890 .

Remove the cover from the modem and install the SIM card into the slot. Close the lid and plug the modem into the USB port of your computer.

The operating system should automatically detect and recognize the new device and begin installing drivers. All information is displayed in the taskbar in the form of pop-up messages.

After installing the drivers, the software installation will begin. When the software autorun window appears, launch the installer wizard by clicking the “Run AutoRun.exe” button.

If the installation wizard does not start automatically, locate the AutoRun.exe file and run it manually. To do this, open “My Computer” and the CD drive with the Connect Manager program recorded on the modem’s flash memory, and double-click on AutoRun.exe.

In the installation wizard window that opens, select the desired language, click “Ok” and follow the installer’s instructions.

All necessary USB modem settings are set by default. To access the Internet after launching the program and detecting a signal, you only need to press the “Connection” key in the “Connect” menu. Establishing a connection is accompanied by a melodic sound signal and the appearance of a graphical display of traffic.

To manually configure the modem, you need to open the “Settings” menu. In the “Network” option you can set the network and signal format – EDGE/GPRS or 3G. By default, network and signal selection is set to automatic. To set the parameters manually, you need to right-click on the network name (MTS RUS 3G in the figure) and select the “Manual” option. After this, the signal will be scanned and a list of all networks detected by the modem will be displayed. All that remains is to select the required one (MTS RUS 3G in our case) and click “Select”.

In the “Operations with PIN” option, you are prompted to enter a PIN code. By default it is not required.

In addition to the “Connect” and “Settings” options, the program also contains the “SMS”, “Balance” and “Calls” options. From the Calls menu you can make voice calls. To do this, you will need a headset with a microphone and headphones or speakers with a microphone.

From the “Balance” menu, the current balance is checked. To do this, click on the “Check Balance” button.

In the “SMS” menu, you can send and check incoming SMS.

Some additional modem settings can be made in Device Manager. To do this, open the “Control Panel” and launch the “Device Manager”. Right-click on the modem (in this case ZTF Proprietary) and select “Properties”.

The first setup of an MTS 4g modem is both simple and skill-requiring. This unit is designed so that you can access the network where you need it and when there is no access to wired Internet or Wi-Fi is not available. The MTS 4 g network coverage covers a large area, so there should be no problems with communication. It is a small unit that is inserted into a USB connector like a flash card. Do you agree that it is very convenient to have it at hand? The device does not take up much space and easily fits into a laptop bag or just a pocket.

To get started, just perform a small setup that can activate the MTS 4g modem. The interface of most programs is designed in such a way that it is not at all necessary to have special knowledge in the field of computer science and programming. During installation, the program does everything autonomously; you only need to agree to the actions being performed and indicate the path to save the files.

Let's take a closer look at how to properly install a 4 g MTS modem on a computer. It is worth noting that in basic kit includes the device itself, instructions for it and a SIM card. To broaden your horizons and compare, you can also read about.

How to connect an MTS 4g modem to a computer

Initially, you should, as you already guessed, insert the SIM card into a special slot. The device will work on the LTE network only with the SIM card that comes with it. If you install another SIM card, it will work on the 3g network and the speed, accordingly, will be lower than declared. Here you can find out, maybe it will be more relevant for you.

How to set up a 4g MTS modem

After preparing for work, you need to insert the device into your computer or laptop. The operating system will automatically detect and recognize new hardware, and then activate the installation wizard itself. If this does not happen, then you need to go to the “Start” menu, then go to the “Computer” section. The USB modem will appear as a removable drive, since it is configured to have a Micro SD memory card slot. Installing a memory card allows us to use it as a removable drive.

- Open the drive and double click on the Autorun.exe file,

- Then follow the prompts that will appear on the screen from the installation wizard.

Additionally, in the Connect Manager application you can also send SMS, activate a payment card, check the current balance and the balance of the megabyte package.

MTS settings for a 4g usb modem with wifi router function

All Wi-Fi equipment in the house, be it a smartphone, TV, tablet, refrigerator, and much more, can be connected to world wide web using a flagship with a wifi router function. You can connect such a 4g MTS modem to a power adapter or PC and use it to launch no more than 10 devices at the same time.

The installation process will depend on the computer's operating system. Let's look at the installation for Windows XP as an example:

1. Insert the device into the USB port;
2. Follow the steps requested by the installation wizard;
3. If you encounter difficulties with automatic configuration, manually run the AutoRun.exe file;

1. Open the address of the router settings in your browser (they are on the device itself). Next, enter the standard username and password - admin;

Instructions

Choose a 3G modem with the technical characteristics that are most attractive to you in the online store or a regular MTS store. Select a suitable tariff from the list of company offers. Complete your purchase.

Also purchase a USB extension cable. This is not necessary, but in practice it often turns out to be useful. Using a cable will allow you to place the modem at the point with the highest signal level. Just don't buy too much long cable– it may happen that due to inevitable losses during data transfer, the computer’s operating system will not be able to recognize the modem at all.

Insert the SIM card into the modem slot provided for this purpose. How to do this correctly, look in the “User Guide” - it should be in the box along with the “MTS Subscriber Directory.

Turn on your computer. Plug the modem into any free USB port on your computer directly or through an extension cable. Wait until the automatic installation of the modem drivers and the “Connect Manager” management program is completed. If autorun does not work, open the folder with the modem files in Windows Explorer and run AutoRun.exe manually double click mice.

Wait until “Connection Manager recognizes the modem and network - the program window will display the message “SIM card is ready for use.” If the signal level is too weak or non-existent, move the modem to another location using an extension cord (the signal strength indicator is in the upper right corner of the program window).

Establish a connection to the Internet by clicking on the “Connect” button. If 3G coverage is unstable or non-existent, first change the network type in the Settings menu to 3G Priority or EDGE/GPRS Only. As soon as the connection is established, the program window will display the message “Connected to 3G (or “Connected to 2G if you changed the settings”).

Monitor the connection progress in the program window and on the indicator on the modem case. When a connection is established, the indicator should light continuously. In this case, the color of the indicator will change depending on the type of network - 3G, EDGE, etc. You can read more about this in the User's Guide.

Connect the MTS USB modem to the PC. Insert the device into any free USB port on your computer and wait until the system detects the modem. Before you can access the Internet, you will have to install the necessary software on your PC. This does not require any special disks. The installer of the necessary software will be launched automatically as soon as the modem is connected

Today, with the help of a modem from MTS, you can have access to the Internet anywhere and not be tied to wires. Moreover, such access is high-speed and can compete with stationary providers. And for people who do not have the opportunity to connect to the Internet via fiber optic, a modem remains the only option. In this article we will learn how to connect an mts modem to devices.

Installation Rules

Once the modem is purchased and the subscriber has decided on the terms of the tariff plan, then all that remains to be done is to configure the network connection. The installation procedure is the same for many devices, and it doesn’t matter whether you connect the modem to a computer or laptop.

First you need to turn on your PC or laptop and wait for them full load, after which we install the modem in a suitable USB port. The modem always comes with a SIM card based on 3g or 4g technology. Usually, when purchasing such equipment, specialists already install the card into the modem, but it happens that a person needs to carry out this process independently. To do this, we pull out a special connector (if it is difficult to find, then everything is described and indicated in detail in the instructions for the modem) and install the SIM card in the same way as in a regular phone.

When the modem is already installed in the device, the system begins to determine the drivers to launch. Previously, the modem was supplied with special wheels with programs for installation, but today it is enough to insert the modem into the computer, and it will install itself the necessary program. An icon will appear on the taskbar and information that a new device has been detected. You need to click on this program and the system itself will offer to install it. A window with a “run” button will appear on the monitor; when you click on it, the program will be installed on the device. As soon as the process is completed, an MTS Connect shortcut will appear on the desktop. In the future, to activate the Internet, you will need to double-click on it and click connect in the window that appears. That's all you need to do to connect the modem to your laptop or PC, after which you can safely open browsers and use the World Wide Web.

If after completing the procedure the connection is still not established, then most likely this is due to several reasons:

the subscriber does not have funds or megabytes on his account for access;
specific settings are active in the PC or laptop or there are any malfunctions;
the subscriber did not configure the modem correctly;
problems with signal in at the moment at the company.

The latter, of course, happens very rarely, but the first three cases occur very often among users. If there is no money to withdraw, then you need to top up your account and activate any valid Internet package. Specialists in the industry will help you understand the breakdowns and features of the device. In all other cases, the connection is established correctly, and the subscriber can comfortably use the access. By logging into the MTS Connect program, you can not only connect to the Internet, but also check your card account, megabyte balance, or activate additional services. To do this, you need to go to the “account” menu.

Subscribers can install a modem in the router so that access is distributed to several devices at once. Only modern routers that support this technology are suitable for such purposes. When the modem is installed in the device, the configuration is already carried out in the router itself. To do this, register the internet.ms.ru access point and select the 3g or 4g connection option. After which, any device connects to the Internet via regular Wi-Fi.

Modems from MTS and similar devices from other operators have many advantages. One of the main things is their low cost. Often such equipment is distributed free of charge, with trial period and the opportunity to return the equipment if the user is not satisfied with it. Below we will learn how to connect it yourself.

Inside our modem there is a SIM card similar to those found inside mobile phones. Therefore, the device is convenient to carry with you and use wherever you need it. The minimum conditions are to be in the coverage area and top up your account balance. Some new models have a slot for memory cards, thereby turning them into portable media important information. All MTS modems connect the same way, so just choose the one that suits its appearance, technical characteristics and price. In order to connect an MTS modem, we need the device itself, a computer, and sometimes a USB cable to connect them. The latter is not needed if the modem is inserted into a PC USB slot without an adapter. On the other hand, in an area with poor coverage, the cable will help place the modem in a place where the signal is better. The SIM card should already be inside the modem, since in 99% of cases the device is sold with it. The SIM card is removed in the same way as from the phone. Just open back cover and remove it from the holder. It is better to do this for the first time at the point of purchase, so that the sales consultant explains how the process is carried out correctly. Also included with the modem is a manual that describes this procedure in detail.

The necessary software for installing and configuring the MTS modem is supplied with it in the “box”. Drivers can be written to the device itself. Then, when you plug the modem into the PC slot, another one will appear in the list of media. If the system allows autorun, you only need to confirm the installation; the installer will do everything itself. Otherwise, you will have to go to the disk that appears and find the required file in it. As a rule, it is called “AutoRun.exe” or “Setup.exe”, and its icon depicts the company logo. Click on it double click, and the automatic installation begins. In the second case, the drivers will be written to a disk, which must be inserted into the cd-rom after connecting the modem and also running the installer manually. It happens that the modem was bought secondhand, or the disk got lost somewhere. In this case, the driver set can be easily downloaded from the manufacturer’s website.

Do not disconnect the modem during driver installation and preferably do not interrupt it. Along with the drivers, a special program is often installed that will help create a connection and manage its nuances. Its shortcut will appear on the desktop or in the Start menu after installation is complete. If there is no program (for the described operator it is “MTS Connect”), it is also downloaded from the network. The modem is able to independently select the type, depending on its support mobile operator or availability in a given region. For example, more modern 3G will be supported, but provide a worse signal than GPRS. The device will choose between them, or you can manually specify the priority in the program window.

It is possible to connect to the Internet without MTS Connect. We simply create a new network connection in the “Network Control Center”, indicate the dial-up number - *99# and login\password mts\mts. Next, go to “Device Manager”, find our device and enter the initialization line - AT+CGDCONT=1,”IP”,”internet.mts.ru”. We save the settings and connect to the network using Windows.

Probably, in the twenty-first century no one can live without the Internet. Therefore, if you need high speed connection anywhere in the city, then modems from - perfect solution. It is worth adding that they can connect not only to personal computer or laptop, but also to tablets and routers.

Not everyone knows how to configure and connect a modem, so we have written a training article especially for people like you, which describes the entire operating process in detail.

We connect the MTS modem to the computer

The very first step is to connect the modem to the computer. This is quite simple to do, just plug it into a free USB port and install the drivers. Initially, the equipment will detect the device as a CD, but after a few seconds the computer will automatically start installing components and the main management program - MTS Connect Manager. Here the user does not need to do anything, because the technology will do everything for him in automatic mode, and you just have to wait. Upon completion of the installation process, the modem will no longer be reflected as a CD-ROM, but as a full-fledged flash drive. A MTS Connect Manager shortcut will also appear on the desktop.

Immediately after this, click on it, the program will start, click on the “connect” button and that’s it. Great, now you have a high-speed connection that you can use anywhere in the city. Launch your browser and feel free to use the World Wide Web.

Perhaps that's all that needs to be done. Some users may have connection problems, in which case try plugging the modem into another USB port, restarting the computer and cleaning the system of various debris.

If you want to work with a modem from MTS, but at the same time use the services of another operator, then reflash the device.

How to connect an MTS modem to a router?

Many people know that all routers are different, and their price directly depends on their capabilities. So, to some models you can connect a USB modem, which will “inflate” the Internet throughout the room. But the price of such a device will be slightly higher, because not every router will be able to support 3G or 4G connections. So, how to connect a modem to a router?

Make sure your devices are compatible.
Install the modem in the router.
Set the necessary settings in the web interface.

If you specify as a dial-up number *99# and the address of the access point internet.ms.ru, then a 3G or 4G connection will be automatically created in the settings. Or you can simply install automatic setup connecting the router immediately after turning it on. Some models provide pre-set settings for all Russian operators.

If you encounter problems connecting the modem to the router, try updating the software or purchasing a newer router model.

The process of connecting a modem from MTS to a tablet

In this case, everything is somewhat more complicated, however, almost every user manages to cope with the task. Otherwise, just seek help from a professional. So how do you connect a modem to your tablet?

At this stage there are two possible options developments: if the tablet has a USB connector or if not. In the first case there will be no problems. Plug the device into the port, create a high-speed connection, specify the dial-up number *99# and access point internet.mts.ru and enable data transfer. Ready.

In the second case, you need to dig around. Install the program " Hyper Terminal» on the computer to get through it to the tablet. Immediately after starting the program, select required device, enter the command ate1 and then AT^U2DIAG=0. Click OK.

Attention! Combination AT^U2DIAG=0 created for modems from HUAWEI. If yours is from another company, then find the appropriate command specifically for it.

Many Chinese companies require the connection of a USB modem, so our main task is to change the perception of a flash drive as a CD-ROM to USB. Next you need to configure the connection.

The process of disconnecting the modem from MTS

If the user decides to stop using the MTS modem, then he needs to turn it off. This is done very, very simply. We interrupt the connection in the MTS Connect modem management program (if on a PC) or stop data transfer (if on a tablet). We remove the modem from the USB port.