Whichever version of Windows is installed on the computer, the user will want to configure it to get the best performance. This question is especially acute for owners of weak hardware, which requires a maximum of free resources for stable operation. Therefore, tuning Windows 10 for maximum performance is a great priority for them when purchasing new components such as a processor or video card.
Disk Defragmenter
When a large number of files are added to the hard drive, information is written not sequentially, but in fragments on different parts of the disk surface. In this case, fragmentation appears, and during a request for data, the computer takes longer to process them, because it needs to put all the "pieces" together. Defragment your disk to minimize these situations. This is done with standard utilities.
Good to know! In Windows 10, disk defragmentation is performed automatically once a week at a set time. But you can start this process after adding a lot of information to the computer in order to optimize the disk.
Important! In the "Optimize disks" window you can enable / disable and configure automatic defragmentation.
Optimization of startup
In many programs, when they are installed on a computer, the function is enabled during system startup. They may not be used by the user, but when working in background, take away the resources of the computer, so its work slows down. Apps that you don't use should be disabled or completely removed from your computer if you don't need them.
Alternative options for disabling programs at startup can be seen in the video.
Disable unnecessary services
Just like startup programs, some windows services 10 load the computer resources, which leads to slowdowns. Disabling them will increase system performance.
- In the Run window enter the command services.msc.Alternative option: Control Panel> Administrative Tools> Services or open System configuration (in the Run window, enter msconfig) and go to the Services tab.
- RMB> Properties> Startup Type> Disabled.
- When using the Computer Configuration utility, uncheck the required services and save the changes.
- Reboot your computer.
Video
Watch the video to learn more about which Windows 10 services you can disable and how to do it.
Customizing visual effects
In Windows 10, a lot of PC resources are used to create visual interface effects. Disabling some parameters (visual effects) of performance will increase the speed of older computers. But on modern gaming PCs, they will have less of an effect.
Disable adapting windows and the taskbar to the background color, as well as Windows animations.
Indexing speeds up the search for files that are stored on your computer. But this function constantly scans them, monitors changes, and therefore uses system resources.
Important! You should turn off indexing only when you are not using search on your computer.
Driver setup
One of the problems is slow Windows work 10, which is encountered by a large number of users, these are non-original or outdated drivers. This problem is especially relevant for a video card. Look at the driver vendor and their version in Device Manager.
Clearing the Temp folder
The Temp folder in Windows 10 is used to store temporary and intermediate files created by the system and programs. Therefore, to speed up your computer, clean it:
An alternative way is to use the built-in Disk Cleanup utility.
Power settings
By default, Windows 10 sets to Balanced Power Mode, which slows down the processor speed if the device is idle or does not require maximum hardware performance. To speed up your work, put your computer into a "High Performance" power mode.
Cleaning from viruses and malware
If, after performing the above actions, the PC still slows down, and you do not understand why this is happening, viruses or malware are most likely the cause. Check Windows 10 antivirus software such as DrWEB Cureit or Malwarebytes Anti-Malware.
Output
Tuning for maximum performance Windows computer will help speed up its work. To do this, you need to disable all visual effects, remove viruses, and also change the PC settings: disable indexing and some services, update drivers.
In order to more efficiently use the resources of your computer, you need to correctly configure the power consumption settings of your PC. Windows 10 in terms of power saving settings is not much different from previous versions of the operating system.
In order to enter the required section "Power supply", you need to go to the control panel. This can be done, for example, by pressing right click mouse on the Start button. And select "Control Panel" in the context menu or - if you have a laptop - right-click on the battery icon in the system tray. After that, find the item "Power supply". To make it easier for yourself to search in the control panel, in the "View" item, switch the view from categories to icons.
There are three performance modes by default in Windows. The "Maximum Performance" mode allows you to enjoy the system to the fullest - however, the power consumption in this case will be considerable. On the other hand, "Saving Energy" allows the device to last longer on battery power. True, at the expense of power. The third option is a trade-off between energy consumption and power. Each mode can be customized at your own discretion. To do this, define the required circuit and select “Setting up the power supply scheme”.
Basically, adjusting the power settings is designed to configure the computer to go into sleep mode: you choose the optimal time interval for the PC to go to sleep and turn off the display to reduce the power consumption of the computer.
Advanced power settings allow you to fine-tune power consumption. For example, you can clarify whether your system will require you to enter a password when you wake up, after what period of time the PC will go into hibernation, whether you need to leave power to the USB ports in sleep mode, how the system will react to pressing buttons on the system unit.
If you want to create a power plan from scratch, you need to select the item “Create a power plan”. This item can also help if your power settings “fly off” when the system boots. The setup wizard will prompt you to select one of the three default modes that you want to edit and will allow you to choose a name for the circuit. By optimally adjusting “for yourself” each item of the additional system settings, you can extend the battery life of the laptop or reduce the amount of energy consumed by a powerful desktop PC.
The latest version of Windows is designed not only for stationary PCs, but also for laptops and tablets. Accordingly, the issue of increasing the duration of the device's battery life is becoming more urgent than ever. To achieve this, it is necessary to produce correct settings power supply in Windows 10.
To start optimizing your power supply, open Start and select the Options". You can also go to this menu using the keys quick access Win + I.
In the "Options" window go to the " System».
In the left pane of the window, go to the " Saving charge", And on the right, open the link" Battery use».
In this window, the system will display application usage statistics. Based on this data, you will be able to identify which applications are using the most of the battery, which should be prohibited from activity in the background, etc. Click the arrow in the upper left corner to go back one position.
Now, at the very bottom of the window, go to " Battery saver settings».
Battery saver mode allows you to achieve an increase in time autonomous work laptop or tablet by disabling push notifications and stopping programs running in the background.
By configuring this mode, you can specify the remaining percentage of charge at which the power saving will turn on, as well as add programs to the list of exceptions that will be able to run in the background and send push messages regardless of the battery level.
Click the back button. Now, in the left pane of the window, open the Power & Sleep tab. To save battery power, set minimum time battery life of the screen. Just below, specify the idle time of the device, after which it will go into sleep mode.
In the same section, click on Advanced Power Options to display the classic power management window. Here, in addition to the time when the screen turns off and the device goes into sleep mode, you can adjust the brightness level of the screen depending on its operation: from the mains and from the battery.
Power management in Windows 10 allows you to customize the behavior of the operating system during long periods of idle time. In particular, you can set an interval from 1 minute to 5 hours after which, if there is no activity on the part of the user, the screen will turn off and / or the computer will go into sleep mode. You can also prohibit these actions altogether. This is convenient when the computer has to work all the time, regardless of whether there is a person nearby or not. Let's figure it out in more detail, how to set up the power supply in the top ten.
The simplest and quick way to open the power settings in Windows 10 - this is to press the RIGHT mouse button on the Start menu and select the second item " Power management". You can find it in another way - in Settings (the gear icon in the Start menu or Notification Center). There we first select the "System" section, and then in the left column go to the "Power and sleep mode" item.
If you are working on a stationary computer with Windows 10, then you will have only one option for controlling the screen off and going to sleep - when powered from the mains (as in the image below), if you are using a laptop or netbook with a ten, then in addition the same settings will appear when the device is running on battery power.
So, here you can set the time interval after which in case of user inactivity monitor turns off or the computer will go to sleep, which allows you to significantly save energy, but at the same time keep all programs running, and windows - open. The interval is set both in minutes (from 1 to 45) and in hours (from 1 to 5). Also, in all cases, you can choose a "Never" setting to prevent turning off power to the display and entering sleep mode.
If you are one of those who do not have enough of the presented power settings options, then you can click the "Additional power settings" link and in a new window you will see advanced settings - they look the same as in the beloved operating system Windows system 7.
Here you can not only choose a suitable power supply scheme: energy saving, balanced or high performance but also to produce more fine tuning... In particular, in the left column there are items, by clicking on which, you can configure the action when you press the power buttons or when you close the lid (for a laptop). This allows, for example, to make it so that when the laptop is slammed, the operating system automatically shuts down or goes into hibernation mode.
Also, here you can customize the power supply scheme used in more detail by clicking "Configure the power supply scheme" opposite the desired item and in a new window selecting "Change additional power settings".
To change the settings in this window, you should only have a good understanding of what they are responsible for and how they work. However, even if something was done wrong, you can always restore the default values in the power settings.
Finally decided to upgrade to latest version OS from Microsoft. I initially knew that after installation I would setting up windows 10 for maximum performance. I immediately remove various visual effects, smooth transitions and all that. Only efficiency and speed. What needs to be done for this? I'll tell you now.
Customizing visual effects
Right-clicking on the icon "This PC" selected the item "Properties". Previous Windows versions at this stage, they were configured in the same way. Therefore, I do it already intuitively. On the left, I click the bottom menu item "Additional system parameters". In the window that appears, I press the upper button "Options".
The picture shows which items I have checked and which I have removed. This completes the performance tuning of the working environment. By clicking the "OK" button, I forget about this setting until the exit new version Windows.
Power supply
Having a laptop for mobility and a stationary computer for working at home, I nevertheless set up the power supply both there and there in the same way. That is, with an emphasis on performance. No energy savings. Initially, the power plan in Windows 10 is even called "Balanced". Timers for screen fading and computer hibernation are set. The time is even indicated after which HDD must stop. I don't need it. Set the screen fade to "Never" and disabled sleep mode too.
Then I assigned pressing the shutdown button to turn off the power without prompting.
After some time, the System starts to slow down. I noticed this a long time ago, and I'm not alone. I don't think that new windows 10 will be an exception. Noticing the first signs of deterioration, you have to defragment your disks. This is a long-term business, but necessary. I usually set this task at night. In the "Control Panel" in the "Administration" section there is the search "Disk Optimization."
Startup
The next step is to look at Startup. This should be done periodically, after each installation of new programs. Some of them have a habit of starting every time the computer is turned on, which leads to an increase in system boot time and load on RAM.
Right-clicking on the Taskbar, I bring up the context menu and press "Task Manager". On the "Startup" tab is the desired one. In just installed system there will be nothing. But as soon as I install the same Skype, it will be registered there and then. It should be removed.
Let me summarize what I have done:
- Visual speed - removed all effects.
- Power supply - no savings.
- Defragmentation - keep all files in their place.
These are not all actions that will speed up the work of the System, but the most basic ones.
learnwindows.ru
Tuning Windows 10 for Maximum Performance
Hello everyone, this article is about how to tune Windows 10 for maximum performance.
What is meant by the concept of maximum performance: this is the work of the computer at 100%. For example, your monitor often goes out and the computer enters the so-called sleep mode in order to save energy. And after waking up, it requires you to enter the password again if you have it set!
This is not very convenient and personally I am not satisfied with this small flaw, so now I will tell you how to eliminate it.
Step by step setup:
To do this, go to the Control Panel
Select the Power supply item
In the left toolbar, click on the Request password on wake-up tab
In the parameters of the power and sleep buttons, we indicate that the Action is not required, respectively, click Save changes
In order to create a specific power management scheme. Select the High performance item, leave the default in the scheme name field and then go to the next section by clicking Next
In the control scheme for putting the display into sleep mode, in the Disable display field, set the Never parameter and click Create
But that's not all, in the scheme that we have created, we need to make a couple more settings.
To do this, in the Power Scheme Setup
Changing Additional Power Options
Then go to the item Hard disk - Disconnect the hard disk after - Status (set equal to 0 min)
Then click OK
That's all, if you have any questions, ask them in the comments!
mixprise.ru
Tuning Windows 10 to the best performance to speed up your computer
MiaSet.com »Training» Windows
Windows setup 10 for maximum performance is essential for a computer to work perfectly. All the necessary settings for Windows of the tenth version occur during the installation of the operating system on the computer.
But there are additional settings which many users would prefer to do but don't know how. How is Windows 10 Tuned for Maximum Performance?
How to disable or remove cloud storage
This innovation does not suit all users, people are suspicious of the fact that their personal information will be stored in an unknown place. And the annoying service that runs in parallel with the operating system annoys many.
There are two ways to get rid of the storage:
Let's consider both.
Actions to be taken to disable cloud storage.
Method one
- You must go to the notifications.
- Select the cloud icon and click on it.
- Next, you need to select the parameters.
- In this tab, you must uncheck the box next to the option: "Automatically start One Drive when you enter operating system».
- In addition, if the user logs into a system that is associated with the cloud, then in the settings you must select the column: "Delete the connection with the cloud data storage."
Second way
- Hold down the Win keys plus R.
- In the window that appears, enter the command: "gpedit.msc".
- The next step is to select the "PC configuration" section.
- Further subsection "Administrative templates".
- Then "OS Components".
- And finally "One Drive".
- In the window on the right there will be a single inscription: "Prohibiting the use of One Drive for data storage", you must click on this column.
- The next step is to switch the state to: "Enabled".
How to tune Windows 10 for maximum video performance:
MiaSet.com
How to tune windows 10 for maximum performance with video
Greetings, dear friends. Let's talk today about setting up Windows 10. Since it is becoming more and more popular, and not so long ago I set it up on my tablet. Also, if you just installed or bought a device on windows 10, then in any case it is best to configure it.
Why do you need to customize windows 10?
We will not go deep into this topic, we will just list a few sharp reasons to understand how to configure windows 10:
- Initially, the system does not work 100%. You just can't please the user, there are millions of them, and the creators of the operating system want to show all the possibilities, well, or the maximum possible. And everyone's needs are different, so it's better to sharpen the system for yourself.
- Services are running, applications that you may never use, but they load the system.
- Perhaps the computer is old or just weak, but you want to work on windows 10.
- Powerful games demand maximum performance.
- Over time, the system becomes littered with various kinds of debris, it must be cleaned.
- Perhaps standard means and programs do not suit you, some need to be disabled, or maybe just change the shell, the type of system.
- You just love to change something with your own hands always and everywhere 😮.
After simple steps, you can safely work in the system and periodically perform cleaning and tuning. So the system will work for a long time without failures and critical errors.
System update
There is a lot of controversy over whether or not to update the system. In my opinion, it is necessary, this is correct. After all, very often there are improvements, some mistakes are corrected, all this improves the system. Yes, I do not argue, it happens that an update is installed, and the system starts to glitch. Let's consider how to configure windows 10 for updates.
I haven't noticed this on windows 10 yet, but in any case, you can rollback as soon as you notice. Besides, faster system will break if you don't update it. Since the programs that you use, in any case, you reinstall or simply install other new programs over time, and the system is hard to work, all sorts of problems may arise, but this is a separate topic for conversation.
And so, we need to go to Options and click "Update and Security". Next, "Check for an update." And if there are updates, immediately load and install.
Windows update 10 and configuring updates After installing all the updates, below we click Advanced options and at the very top we change the parameter to "Notify about reboot scheduling". This is to prevent the system from restarting itself. But you never know, maybe you are playing at an important moment, or you have a serious event, and the system took over and restarted itself - a crash. Whatever it is, we change the parameter.
Changing the update settings We also put two checkboxes below. The first is to keep all windows products updated. The second is to prevent the system from starting to download updates. This is necessary in order for you to manually enable the download of updates exactly when you need it. For example, when the computer is idle, you can enable download and update.
It's just that during the download and update the system is loaded, and if the Internet is also weak, then everything lasts a long time. Some are beginning to get confused, they say the system is slowing down, it means it is bad, but in fact it was just an update.
Below we click on the option "Choose how and when to receive updates." Turn off the parameter as in the screenshot below. This is so that updates do not swing from different sources.
remove loading from different places Also right away, you can disable Windows Defender (on the left of the menu). I use third-party antiviruses, so I don't need a defender. Going to this tab, turn off three items, as in the screenshot.
By the way, about how to choose good antivirus, can be read here.
we turn off the defender Disable login password.
This does not affect performance, but personally I don’t need this function, maybe you don’t need it either, then it will come in handy. Although it still refers to the topic of how to configure windows 10.
This function is not necessary, if you need a password, then do not disable it, now go ahead and figure out how to set up windows 10.
Configuring the System settings.
Before making the settings, it is better to check if all the drivers are installed, if not, install. And you need to install all the programs that you use. Only then adjust and clean.
We will now turn off notifications and remove some of the required applications.
Configuring Privacy Settings.
Now go to the Privacy option (Start - Settings-Privacy). Look carefully here, turn off what is not useful to you. We continue to answer the question of how to configure windows 10, so here we disable what applications can refer to. In principle, I always turn off almost everything and do not worry. For some applications, I separately open access when they ask.
And most importantly, Background Apps. Here we turn off everything that we do not use every day, all the time. The fact is that everything that is included always works, otherwise we don’t need what we don’t use, we turn it off so that the system does not load.
Disable background applications Editing system properties.
Now we open the start-up system. On the left, select the item - System Protection. We will enable it on the C drive, or on the drive where you have the operating system installed. To do this, click on desired disk, I have C, below we press configure.
Now the point is to turn it on and set the slider below about 5-8 GB, this is quite enough. and click OK.
Turn on system protection on the system disk We continue to figure out how to configure windows 10. Now, on the left, under System Protection, select - Advanced system settings, Performance - settings.
Performance settings The option visual effects will open, put a check mark on Provide best performance. Then all the checkmarks in the lower list will be removed. And now we put only 5 checkboxes on this list, as in the screenshot. You will not see much difference, and the system will load less.
customize visual effects Now next to Visual effects click the Advanced tab and below In paragraph Virtual memory click the Change button ...
change the swap file Now select from the list system disk, I have C and below we tick the No paging file box. But on the other disk we put the paging file twice as much as yours random access memory... For example, you have 2 GB of RAM, then set the paging file to 4 GB or 4000 MB. We write in two fields, opposite to the item Specify the size.
Changing the System Configuration.
We continue and answer the question of how to set up windows 10, describing everything as I do it myself for my computer, which serves me faithfully for a long time and without failures.
- Service wireless Bluetooth (if not using it),
- Bluetooth support service (if not using it),
- Cryptographic Services,
- Fax,
- Geographic location service,
- Downloaded maps manager,
- Telephone communications,
- Dispatcher automatic connections remote access,
- Store demo service,
- Task Scheduler,
- Smart Card Removal Policy
- Configuring a Remote Desktop Server,
- Touch keyboard service (only if you do not use it, for example, you have a tablet),
- Telephony,
- Remote Desktop Service,
- Wallet service,
- Service windows store,
- X-box Authentication Manager,
- Saving games on X-box Live,
- X-box Live network service.
Now click apply.
We clean up unnecessary files.
Even if you have just installed an operating system, it is necessary, even necessary, to clean disks from unnecessary garbage.
To do this, go to my computer (this computer) and on the system disk, I have it C, right-click, click properties in the menu. Below there will be a button "Disk Cleanup", press it and wait as long as necessary while the system scans the disk.
Disk cleanup Next, a window will open, there we put a checkmark everywhere, below we press the button "Clear system files“, Just put the checkboxes everywhere and click OK. The procedure takes time. It is better to do this cleaning more often, about once every 3 months. The first one goes clean for a long time, the next ones are already faster. There is nothing to be afraid of, this tool is very reliable and of high quality.
select the checkboxes everywhere We continue to figure out how to configure windows 10. Then, after cleaning, also in the properties of drive C, click the tab next to - Service. Checking for errors. Even if for the first time he says that a check is not required, we do a check. If it finds something, the system will fix it or notify you and click fix.
Disk check Go to Optimize and Defragment the Disk, Click Optimize. In the window that opens, click on the system drive, I have C. And below we click Analyze. After the process is over, click Optimize next to it. The process takes time.
Disk optimization These steps need to be repeated from time to time with your computer. This will make it run faster. After optimization, we close everything.
Then press the Win + R combination again, the Run window will open. where we write% temp%, a window will open where we select all folders and delete. We skip what is not deleted.
Cleaning the temporary folder This opens a closed folder with temporary files, they need to be cleaned periodically.
Power settings.
We continue to figure out how to configure windows 10. Go to Control Panel - Hardware and Sound - Power Supply. Here below we put a tick on "High performance".
power settings If you have a simple desktop computer, you don't need to do anything else. If you have a laptop or tablet, it is best to leave the Balanced (Recommended) scheme and just exit. This will save battery power.
Also on the right, you can click on "Settings for switching to sleep mode" and set there both from the Network and from the Battery, never go into sleep mode. Again, if the computer is always connected to the network.
Setting the transition to sleep mode I think we have done the most basic way of setting up windows 10. Of course, there are actually a lot of settings, but we did the most basic thing. The system will now work more stable. The main thing is not to forget to periodically clean and optimize disks. It is from the garbage that the big problems begin.
It's also best to customize the start menu itself. Reduce some icons and, most importantly, remove those icons that you do not use.
There should not be many shortcuts, folders on the desktop, all this loads the system. Try to clean up your desktop and disks right away, while you work. This helps the system run quickly.
As an alternative to antiviruses and various cleaning programs, I advise you to install 360 total security... It protects the computer well and cleans it the same way. In addition to this, there is a lot more interesting.
Among other things, I strongly advise you to read the article: "How to clean your computer so that it does not slow down." We also wrote a lot about optimization.
That's all for me, stay with us further. Subscribe to our articles. Write in the comments, I will answer everyone and share the article in social networks... Goodbye to everyone.
Bonus put a video about detailed setting the system, very useful, consists of 2 parts.
