Router smart box one firmware. How to connect a router from beeline

Changing the Internet provider is not a frequent thing, but sometimes it is very necessary. Especially lately it concerns Beeline subscribers. Having gained a large customer base in due time, the quality of services gradually began to fall compared to developing competitors. However, when changing the operator, one problem arises. The fact is that Beeline, together with tariff package distributed everywhere its very good branded routers for those times smart box One that is pledged to use the internet only on their network. However, there is a way to save money - flash the Beeline Smart Box router for all operators. How? Now I'll tell you!

Configuring the Beeline Smart Box router for all operators

Today you can find a bunch of ads on Avito selling Smart Box - at ridiculous prices and in excellent condition with a complete set and box. The fact is that few people know that the Beeline router is easy to set up to work with any provider. It does not even require a complicated firmware for beginners.

The secret is that when we log into the control panel under the default administrator account with the login and password admin / admin, which are indicated on the sticker, the WAN port setting, which is just responsible for choosing the type of Internet connection, is blocked on L2TP for Beeline.

To unlock it, you just need to log into the router from under the super-user.

To do this, open the login page http://192.168.1.1 in the browser and use the pair:

Login - SuperUser
Password — Beeline$martB0x

If this data is not suitable, then we try to specify as a password serial number router indicated on the label - it looks like "SFXXXXXXXXXX".

If you are, then read our other article, which understands possible mistakes and suggestions for correcting them.

After authorization in the "Advanced settings" section in the "Other" menu, we get full access to all configurations, including the Internet, without any firmware. There are now all types of connections, including through a 3G modem.

Beeline on the market cellular services has existed for a very long time, providing its customers with high-quality communications, different services, prices are different, there are quite budget ones, which means that they do not cash in on customers, there are promotions and bonuses. Recently, the company began to produce high-quality equipment and one of these creations is a router: smart box one- an excellent beeline router!

Firstly, the most important thing that a modern person needs is to keep up with the times and the price, in this case, do not go broke with a smart router, because the prices are very cheap, especially if you take an all-in-one tariff for it, the cheapest is 600 rubles . per month, includes: payment for a mobile phone (including the Internet), and the most suitable for active users is "all in one 5" 2500 (and this is payment for 5 numbers, television and the Internet!), Secondly, the quality of communication. This is what the Beeline smart box is for.

Connection. You need to connect the cable, which was led by specialists to the apartment, to the Wi-Fi WAN port, and the computer to the LAN port. It is possible even without wires, but if you are a beginner and do not know how or are not sure that it will be better to use the usual method.

Wi-Fi setup - on the Beeline router

Connect the computer's network cable to any port on the router. (there are 4 of them, called LAN) And the cable that was brought into the apartment is connected to the WAN port in the same router.
Open browser and enter: 192.168.1.1. If you entered everything correctly, you get to the greeting, then click continue.
Enter login - username and password. To make it easier, you can enter, without inventing your own, in the first and second fields bilain. Continue button.
Select item " Quick Setup».
The most difficult thing begins, but almost everyone copes, and if not, Beeline operators will be happy to help:

You get to the section - "home Internet" enter any number or letter in the "login" and "password" fields just like that.

In the “Wi-Fi network of the router” section, the wireless network is configured.

If the network frequency is 2.4 GHz: enter a name in the Network name field (everyone will see it, including you) so the beeline router will now be called, then enter a password of at least 8 characters.
If the network frequency is 5 GHz: enter the Network name, for example, ali_wifi70G and create a password.
"Guest Wi-Fi network" - setting wireless network(not necessary).
- if a TV is connected, then you need to select the port of the router from the TV. Next "save".
Wait about a minute for it to set up. Great, setting up the beeline smart box one router is completed!

Where to buy a smart box router?

Smart box can be purchased at any store with electrical equipment or in Beeline stores. Its cost is 2500 rubles. To be sure of the quality of products, this brand and product, you can watch video reviews, most of them on Youtube. There is also a beeline smart box one forum, whose members share problems, help solve them, in conclusion, no one has yet canceled customer reviews, here which will really help you understand the product.

Reviews about "wi-fi router beeline smart box one"

Nicholas from Tver: (As you can see, Beeline is very big company and offers its services in almost all cities of Russia) “advantages: compact, lightweight, pleasant to look at. Disadvantages: none);

Natalia from Kaluga: “+ price, design, reliability, lack of bright light indication, the seller is a friendly woman, as for it, it’s not a simple setup for other providers. They connected it, but after 4 months the Internet began to fail - "the connection is broken." You reboot some kind of magic, it works for 15 minutes, and then again. Beeline operators suggested flashing, but it didn’t work out, I had to call in specialists, and oh, miracle, it worked! ”;

Artur from Khabarovsk:"pros: dual band wifi, good speed works on wifi, does not freeze, compactness is not a strong light indicator, many inputs.

Flaws: unfortunately it is blocked only for beeline, other telecom operators cannot be connected. But when you enter the router settings using SuperUser and a password, the series is the router number - all functions can be unlocked and you get a wonderful router that works with any provider.

Many Beeline customers know about the release of Wi-Fi router Smart Box and purchased it to use the Internet and interactive TV. This device is positioned as a modem for fast wireless internet and meets all relevant standards to ensure high connection speeds.

Beeline issues devices for its customers

What is remarkable about Smart Box from Beeline? It is worth saying that the router is really good in terms of internal content - it supports speeds up to 300 Mbps, has a fairly capacious RAM and outperforms other models in performance. The router has an additional USB port, and the only relative drawback of its design is the built-in antennas, which, however, provide a large signal coverage area.

To set the router parameters for the first time, do the following:

Open the Smart Box menu - enter the IP address of the device (192.168.1.1.) in the address bar of the browser, after the welcome message, click "Continue".
In the authorization window, enter the value Admin on both lines. These data are standard, during subsequent configuration you can change them in order to protect the equipment parameters from outside interference.
Select the Quick Setup menu.
In the window that appears, in the "Home Internet" fields, enter the login and key given to you by the provider (you will find this information in the contract).
In the menu lines WiFi Network router" come up with a name home network and set an Internet access password so that the connection is not available for .
You can activate the "Guest network" section as you wish. If you want to create a separate network based on the router for your friends and acquaintances, come up with a name and access key for it.
Since the router has 4 LAN connectors, select the one to which you will connect the set-top box in the bottom line interactive television IPTV.

After entering all the necessary data, reboot the equipment from Beeline - the corresponding command will appear when you save the changes.

Configuring Wi-Fi settings

If you want to change the Internet settings from Beeline, go to the router menu and follow these steps:

Select the "Advanced settings" item and open the Wi-Fi section, on the left select the general settings tab.
The network SSID string is the name of the connection itself, which you change as you wish.
You can change the operating mode and channel. It is worth setting automatic detection for the second function, then the router will be able to determine which channel to connect to. What is it for? If the neighbors also have a router and your device is on the same channel, the connection may not be effective enough. When choosing automatic mode the router will automatically switch to a less busy channel.
In the same smart box menu, you can disable the guest network by checking the box next to the corresponding line (do not forget to save the changes).

Internet connection security

To protect your connection from unauthorized access, it is not enough just to good password- you should choose a reliable type of encryption for Smart Box. It is done like this:

In advanced settings, Wi-Fi section, select the "Security" tab in the left menu.
In the "Authentication" line, select the WPA2-PSK encryption type.
In the same window below, you can change the access key to connect to the network.

Software update

For each router there is a separate firmware, which is constantly being finalized and improved to make the device even more efficient, fast and uninterrupted. Therefore, it should be updated from time to time. wifi firmware equipment, which you can do as follows:

Download the new firmware on the official website of the Beeline provider.
We go to the initial menu of the router and select "Advanced settings".
Open the "Others" section and click on the update line software(ON).
Select "Choose file" and specify the path to the downloaded firmware.
The router will update the software on its own, after which you need to reboot it - turn it off and reconnect it to the power supply.

Port forwarding

Often, if you want to use a torrent client to download files or play online applications while Smart help Box, you need to forward the port, that is, open it for the above purposes. How to do it?

All this is quite simple and will take a little time, just follow these instructions:

Select "Advanced settings" again from the Wi-Fi router menu, "Others" section.
In the left menu, select the NAT, Application Support tab.
In the window that appears, you can select an application from the list or set your own value, for which you need to click on the "Set user service" button.
If you are specifying your own service, enter the application name, select the protocol type and desired port range in the next two lines.

Don't forget to save all changes! If, with the actions performed, torrenting or games are still unavailable, try selecting the DMZ Host line in the NAT tab - enter the IP address of your computer from which you are opening the port. Did not help? In this case, the problem lies not in the router, but in the security settings of the PC.

As you can see smart setting Box from Beeline is quite simple and will allow any user to quickly and easily start using the device. Thanks to the services of the provider and a powerful router, you can enjoy wireless Internet access with high speed, stable performance and strong signal.

SpecificationsInternet setup TV setup WiFi setup MAC change TR-069 setup Software update

Specifications of the Smart Box One router

Check what you are using current version firmware, if not, then update. Information about the current software version of this model can be found on the Beeline website by entering search line on the model website, or by following the link: https://moskva.beeline.ru/customers/pomosh/home/domashnij-internet/nastrojki-s-routerom/beeline-smart-box-one/

Before connecting the Internet cable to WAN port, it is recommended to go to the CPE and perform a factory reset.

When performing a complex setup ( PPPoE , IPTV etc. - all together) on the router, use the "Save" button on each page where you change the parameters, press the "Apply" button when all settings are completed, because. every time you press it CPE does not reboot, but becomes inaccessible within 20 seconds. This measure will help reduce the overall setup time.

If for any reason the provider blocks your access to the Internet by MAC address, there is a need to change this address. The reasons may be different, such as replacement network equipment, and frequent connections to the network from several accounts.

It is recommended to change the MAC address just before setting up the TV and Internet connection, because this option may not be available later. If the need to change the MAC appeared already with the router configured, then you will have to reset the settings to the factory settings and carry out the setup process again.

SettingPPPoE.

We go into the settings of the router. To enter, you need to enter the IP address 192.168.1.1 in the address bar of the browser, the system will ask you to log in. Under normal access with admin rights (admin / admin) - only DHCP + L2TP will be available to you. In order to configure PPPoE and TR069, you need to log in as a superuser. Login: SuperUser Password: Beeline$martB0x. AT latest versions firmware of the Smart Box router for the superuser, you must use the serial number of the device as a password. It is indicated on a sticker on the back of the case, under the barcode - SJxxxxxxxxxx. The authorization page is shown in Figure 2.

Figure 3. Advanced settings.

Now you need to go to the Other -> WAN section.

AT this section you will see the WAN existing on the router - there are no connections that you can change, adding new ones and deleting old ones. For correct operation CPE under PPPoE is recommended to always configure the first connection #1, in this case it is "Iternet-DHCP". If you plan to connect only the Internet, uncheck ✓ "Enable" next to the rest of the WAN connections, except for the first one. Such measures will help to avoid additional settings"Client TR-069".

Figure 4. WAN connections.

For an Internet connection via PPPoE, change the following parameters:

connection name - "Internet-PPPoE";
service type - "DATA" and "MGNT";
connection type - "Routing";
IP mode - "PPPoE";
account and password - issued by the provider;
trigger: "Keep Alive";
DNS substitution - "Enable";
use NAT – ✓ (enable);
VLAN ID - affixed according to the conditions of the region.

Figure 5. WAN connection profile settings.

TV setup

In the menu, select the item "Advanced settings", as shown in Figure 3.

Now the Other -> WAN section:

Figure 6. WAN connections.

Select the connection under the second number #2 to configure the WAN connection, as shown in Figure 6. If you unchecked the ✓ checkbox next to the “Enable” parameter opposite the WAN connection, you need to put it back. Then click "Save" and "Apply".

To configure IPTV, change the following WAN connection #2 parameters:

connection name - "TV";
service type - "IPTV";
connection type - "Bridge";
IP mode - "Static IP".

Select "LAN" from the menu on the left.

Almost at the very bottom of the page is the section "IPTV Port" , where opposite LAN4 we put a tick ✓. Then click "Save" and "Apply". An example is shown in Figure 8.

Figure 8. TV connection

Setting up a wireless networkWi– fi

Select "Advanced Settings" from the menu

Now the Wi-Fi section -> Basic settings.

In this section, the wireless network settings are made, it works in two modes (2.4GHz and 5GHz), the settings are similar for both modes.

To configure Wi-Fi in 2.4GHz mode, change the following parameters:

Wireless Mode - "2G";
Network ID (SSID) - "RT-WiFi_2G_F51159";
Operating mode - "11n + g + b";
Channel - "Auto";
Signal level - "High";

An example is shown in Figure 9.

Figure 9. Wireless network settings with 2.4GHz mode.

To configure Wi-Fi in 5GHz mode, change the following parameters:

Wireless Mode - "5G";
Enable wireless network (Wi-Fi);
Network ID (SSID) - "RT-WiFi_5G_F51159";
Operating mode - "11a + n";
Channel - "Auto";
Bandwidth - "Auto 20MHz + 40MHz";
Signal level - "High";
The number of connected devices is unlimited.
Then click "Save" and "Apply".

An example is shown in Figure 10.

Figure 10. Wireless network settings with 5GHz mode.

Setting up network securityWi– fi

Select "Advanced Settings" from the menu

Now section Wi-Fi -> Security.

By default, the wireless network password is located on the back of the device next to the barcode.

Wireless Mode - "2G";
select the network ID (SSID) - "RT-WiFi_2G_F51159";

Figure 11. 2.4GHz wireless network security settings.

To configure network security in 2.4GHz mode, change the following parameters:

Wireless Mode - "5G";
select the network ID (SSID) - "RT-WiFi_5G_F51159";
Authentication - "WPA/WPA2-PSK";
password (PSK) - from 8 to 64 characters.

Figure 12. 5GHz wireless network security settings.

ChangeMACaddresses.

In order to change the MAC address, you need to go to the device under account administrator, the default is (admin/admin).

Select "Advanced Settings" from the menu.

Now go to the Other -> WAN section.

On this page, in the "Clone MAC address" field, you can either print any or clone the MAC of your PC.

Figure 13. Change page MAC addresses.

You can view the current MAC address by selecting the "Advanced settings" item in the menu. An example is shown in Figure 14.

Figure 14. Advanced Settings page.

Client SettingTR – 069

If you configured the first WAN connection under PPPOE, then there should be no problems with the appearance of CPE on ACS, otherwise you need to check the TR-069 client settings.

In the menu, select the item "Advanced settings", as shown in Figure 3.

Now you need to go to the Other -> TR-069 Client section:

To connect the CPE to the ACS server, change the following parameters:

WAN connection profile "Internet - PPPoE",
ACS URL: "acs.rt.ru",
then click "Save" and "Apply".

Completed fields will serve as indicators of a successful connection, such as:

Account Connection Request;
Connection Request password;
The Periodic Inform interval is "28054".

An example of a connected TR-069 Client is shown in Figure 15, and not connected in Figure 16.

Figure 15. An example of a connected TR-069 Client.

Figure 16. An example of an unconnected TR-069 Client.

Software Update.

Before updating the software, you need to clarify the model and firmware version of your router, since this process is very responsible, you can harm the device by trying to install incompatible firmware from a different model, which will most likely lead to negative consequences.

View model and current version Software, in the WebUI menu, select the “Advanced Settings” item, as shown in Figure 3. Next, a page will open in front of you, at the bottom of which there is the “System Information” item. An example is shown in Figure 18.

Check that you are using the latest firmware version, if not, then update.

Figure 18. Model and software version.

Select "Others" from the top menu.

A page with the main settings of the router will open. In the left menu, select "Software Update".

Click the "Select File" button and select the location of the firmware file you downloaded earlier.

After that, click the "Perform update" button. An example is shown in Figure 19.

Figure 19. Item "Software Update".

Wait for the router to update the firmware, this process takes approximately 5 minutes, after which the router needs to be rebooted and it will be ready for use. An example is in Figure 20.

Figure 20. Update process.

Remarks.

1. When connected to old PCs, this router may not work correctly with the network, display its status as "Unidentified network", an example is shown in Figure 18. The problem occurs when the CPE is rebooted, reset to factory settings. To solve the problem, you have to restart the PC, or enter into "Sleep Mode" and vice versa.

Figure 18. Unidentified network.

With frequent use on this device multiple accounts for PPPoE connection, CPE can be blocked by MAC address indefinitely. To avoid such a problem, it is recommended to use one account for work, but if a blocking problem occurs, you need to change the MAC address.

3. Changing the MAC address is carried out only from the administrator account (admin / admin) and provided that under SuperUser the initial WAN connection settings have not been changed, otherwise a factory reset will be required.

During the operation of the Smart-Box router, users need to reconfigure the equipment, for which they need to enter an individual login and password. But what if the password from the router is irretrievably forgotten or lost and cannot be recovered?

In this case, you can unlock the router Beeline Smart-Box by resetting the settings and then entering the credentials and password, including.

What to do if you forgot the password from the Smart-Box router?

To unlock the Smart Box router if the password is lost or forgotten, you need to change it. With the existing settings, it is no longer possible to change the password. It is required to perform a factory reset, and then enter the necessary data, following the recommendations below.

Check to network cable computer was connected to one of the LAN ports located on the device.
The cable that is brought into the apartment must be connected to the WAN port.
Press the "Reset" button located on the router case.
On a computer, open an existing Internet browser and enter the following combination in the address bar - 192.168.1.1. The welcome management page will open wifi router. Click on the "Continue" button on the screen.
On the Start Over page that opens, enter standard login and password. Enter the word admin in both lines and click Continue.
In the menu that appears, select the section - "Quick Setup".
Here you need to fill in several subsections, described below.

In the "Home Internet" field, enter a new username and password. Other Beeline home Internet settings are already embedded in the device's memory and do not require adjustment.

In the “Wi-Fi network of the router” subsection, you need to come up with the name of your home wireless network and a password to access it (at least 8 characters).

“Guest Wi-Fi network” has similar characteristics to a home network, here you also need to enter a name and come up with a password.

In the "Beeline TV" field, you need to select the port for connecting the set-top box. This option is relevant if, in addition to home internet you also use Beeline television. You need to fill in this subsection only when connecting a TV cable to router Smart-Box. Select the number of the port to which the cable going to the set-top box is connected.

After completing all the necessary settings, click "Save".

Saving the settings will take some time, usually about 1 minute.

After making an Internet connection, the router will start working, and the message “Internet connected” will appear on the screen.

Reset router Beeline Smart Box

In order to reset the router, you need to find the "Reset" button on the side where the ports for connecting cables are located. It must be pressed with a match or a toothpick (do not use sharp objects such as a needle, you may damage the button). The button must be kept pressed for 10-15 seconds until the indicators on the front of the device blink. After that, the router will boot from default settings and will be completely ready for configuration according to the instructions above.

Do not forget to write down the new login and password in order to quickly make the necessary settings changes without resetting the router!

Video: Instructions for setting up a Smart Box router