Unlocker is able to unlock almost any file in the operating system that is used by another process, it integrates a new “Unlocker” item into the context menu of each Windows element (folders, shortcuts, etc.), which completely removes the lock from a file that cannot be accessed. Equipped with support for many languages (including Russian), and there is also a portable version for 32-bit and 64-bit Microsoft Windows operating systems.When installing, be careful not to install unnecessary software! Skip installing extra software!
Unlocker can
- Unlock a file if you are denied access.
- Unlock file if file sharing or network file sharing violation.
- Unlock a file if the file's source or destination is busy.
- If the file is being used by another program or user.
- Unlock the file if the disk is full and it is impossible to delete it due to lack of space.
How Unlocker works
When you click on the standard "Delete" context menu item, the file is automatically deleted if it is not occupied by another process, otherwise a system message appears stating that access to the file is denied, while the Windows operating system does not provide information about which process is interfering with work with file, the “Unlocker” item allows you not only to stop these processes or free them from a file that is used by another program or user, but also provide a list of all processes that deny access.
Unlocker allows you to perform commands on files such as deleting, moving or renaming. Also, all operations can be performed from the command line, a list of commands can be obtained by running Unlocker.exe from the command line with the /? parameter.
Sometimes in the fight against viruses, it may be necessary to delete a particular virus file, but this cannot be done, because it is used by the system, i.e. participates in any process. Almost always, the system tells us that the file is busy, but does not say what process, so it is not clear what to do to cure our own computer. And even if we find the ill-fated process, then when it is deleted, it immediately starts up again, and deleting the file is again impossible. What to do in such a tense moment? will help us Unlocker- a utility that copes with any system process.
Installing Unlocker
During the installation process, pay attention to the two windows below. Since Unlocker is completely free software, the authors make money on other products that are built into the installation file, so if you do not need additional programs that clog your computer ( how to clean your computer see), follow the instructions in the pictures.
Then you can select the desired installation items and the program will be installed on your computer.
Using Unlocker
Run the program as shown in the picture below. If you have Windows 8, find the program icon in the Start menu.
For example, I will try to delete a file that is open by another program. A message appears stating that this cannot be done.
Now right-click on the desired file and select " Unlocker».
In the window that opens, we can do process actions: delete process, unlock, unlock all (this applies when multiple processes are running). 
You can use the built-in Windows tools to remove any programs, files, and folders. If these features do not help get rid of files, then special third-party utilities, such as Unlocker, come into play.
Download Tool you can from the official website of the application, finding it on the network will not be a problem. Installation is very simple. After installing the application embedded to the context menu. It is also available from the menu. Start.
The main features of the utility:
- If software not uninstalled completely, the remains can be cleaned with Unlocker;
- Removal files created by viruses (you cannot get rid of them with conventional methods);
- cleaning virus files that run in the background;
- Removal unnecessary temporary files from the system disk (you need to know which data cleaning will not affect the system performance);
- Working with the program command line(for more experienced users).
An example of using Unlocker
After installing the utility, try to get rid of a file or folder that cannot be deleted by standard Windows functions. For example, you are trying to uninstall an application running in the background and a message is displayed that this software is currently in use. Just click right click mouse on the folder with the program and select the item " Unlocker».
A window will appear that prompts you to select actions with the selected data. In this case, we need to get rid of the folder with the program, so select the item " Delete". Click OK.
A notification will appear that the object has been deleted. 
Removing programs that run in the background
If there are applications that are not removed by the usual means of Windows OS, they can run in the background and interact with the system and other third-party components. Viruses act in the same way, gradually damaging the system and complicating the work of the user. To fix the problem, we will use Unlocker again.
Find a folder with the program currently running. Right click on it and select " Unlocker».
A window will immediately appear with the processes using the non-removable object. Let's press the button " Unlock everything». 
As a result, the processes should end successfully and, as a result, you should again try to delete the directory with the object that cannot be deleted using the uninstaller.
If the processes did not close, let's try to temporarily delete them by clicking on the "Delete Process" button (to begin with, select all processes). And repeat the removal procedure again.
Thus, it is possible to clean up almost any file or folder in the Windows system. Sometimes this process may require a reboot, and sometimes the utility may not work at all for unknown reasons.
If you decide to remove Unlocker, it is better to use another uninstaller, such as the Uninstall Tool. It cleans not only leftovers in different places of the system, but also entries in the registry.
Each computer user at least once faced with the fact that the system does not want to delete this or that file, while notifying that it is being used by some processes. To eliminate such files, you need to use special programs. One of them is Unlocker.
This program is designed to uninstall locked files and terminate processes in the system. Using a PC involves frequent renaming, moving, and deleting files.
During the operation of Windows, folders and files are constantly used by some programs and are involved in some processes. If at this time you perform some actions with the file, then the OS will indicate the impossibility of carrying out such manipulations.
To perform the necessary manipulations with running files, you need to close it and stop the process. Carry out a rename or move does not resolve the process that occurs in the operating system. This requires closing the folder or file, which will cause the process to stop.
Sometimes it is not always clear what prevents you from managing a file or folder, and the operating system does not tell you which process needs to be stopped in order to manipulate them. In most cases, inexperienced users do not know what to do when a message appears on the screen that another process is using a file.
Ending a process through the Task Manager
You can stop processes that use the necessary file or folder using the Task Manager. To do this, in the "Applications" section, select a directory or file and click on the "End task" button. After which the process should stop. Sometimes it happens that these actions do not bring the desired result and the application continues to work.
In this case, you need to go to the "Processes" section. Here you should select the process that uses the file or folder and click on the "End Process" button. But here you should be careful, because by completing the wrong process, you can harm the performance of the system, so you need to be extremely careful.
It follows that using the "Task Manager", a novice user will not always be able to identify the necessary process and terminate it correctly. Therefore, in such situations, it is better to use a special program, which is Unlocker.
This application is specially designed to work with folders and files that are used by some processes in the operating system. The utility provides the ability to carry out the necessary actions with files and folders and close blocking processes. You can download the program from the official website of the developer. It takes up little disk space and has a Russified interface.
From the official resource, you can download various versions of the utility for all operating systems with different bit depths. There is also a portable version that does not require installation on a computer. You need to download the archive with the program, unzip it and install the application on your computer.
How does the program work?
Let's say you need to delete some folder, which is located, for example, on the desktop. The folder is being used by another program. If you try to delete a directory by simply pressing the Delete button, the operating system will report that the folder is in use, and to delete it, you must close all processes.
To delete this folder, you need to right-click on it and select Unlocker from the menu that appears. After that, a program window will appear on the screen, in which all OS processes will be displayed. Here you should click on the "Unblock" or "Unblock all" button. It depends on the number of processes going on in that folder. After these steps, the folder will be moved from the desktop to the "Trash".
Sometimes, after starting the program, a window may appear on the screen, which indicates that Unlocker did not find blocking applications. Then you need to click on "No action" and install the desired one. Among them are "Delete", "Rename", "Move". After selecting the necessary manipulations, click OK. Then a notification about the successful completion of the action will appear on the screen.
Using this utility, you can manage almost all processes in the operating system. The program allows you to perform the necessary manipulations with files and folders that are blocked by other applications.
To remove blocked files, you can use the Revo Uninstaller utility, which also does an excellent job with the processes in the system.
It is necessary to download the program only from the developer's official resource, since the products provided are tested for viruses and malicious elements, and this is a guarantee that the computer's operating system is working.
Unlocker is a utility that is used to unlock a file or folder occupied by a process. If, when trying to delete, move or rename a file or folder, the operating system gives an error stating that the object is busy, but does not report which process, then the Unlocker program can help unlock the object.
However, in this article, we want to draw your attention to a few points regarding the dangers of using the Unlocker program.
What programs are in the Unlocker installation package
The latest builds of the Unlocker installation package, in addition to the utility itself, also contain from 4 to 10 unwanted sponsored programs, extensions and add-ons, such as:
- Sweet-Page as start page and default search engine;
- Istartsurf as start page and default search engine;
- Files Frog Update Checker
- App Hat;
- YouTube Accelerator;
- ShopperPro;
- Ads by Sense;
- PodoWeb;
- Delta Toolbar.
We deal with these applications almost every day. They tend to cause unwanted pop-up windows and banner ads to appear in browsers on their own.
Advice: When installing Unlocker or updating to a newer version, carefully read the information in the installer window and do not rush to click Further.
Do not rush to apply Unlocker
You need to use Unlocker carefully and with understanding. Often, users do not think and at the first opportunity use Unlocker to delete or rename files and folders. We strongly recommend that you first figure out which process is occupied by a file or folder and which application this process belongs to. Why is it so important? There are two main reasons:
- The file may be occupied by a system process, and the file itself may be one of the critical system files, the removal of which may lead to disruption of the operating system.
- The file may be part of a malicious program. If it is unlocked and removed, other malicious files may remain in the system. It often happens that after deleting a “locked” file that interfered with the user, the next time the system boots up, an equally annoying error like “cannot find the file” appears.
Advice: before using Unlocker you need:
- Find out if the file belongs to the system files of the operating system.
- Find out if the file is a component of malware or unwanted software.
- If the file is a malware component, you need to scan the system with the utilities , and . If the file is not deleted during scanning with these utilities, you can delete it manually, but most importantly AFTER checking.
If the file is a system file of the operating system, then, accordingly, it cannot be deleted, moved, or renamed.In order to find out what a file is, whether it is a system file or whether it carries a threat, you can use the service.
How to install Unlocker and prevent malware included in the installation package from entering the system
You can download the program from the official website: http://www.emptyloop.com/unlocker/#download
If you meet a message Chrome has blocked this file as malicious, please use .
Run the downloaded file.
Choose a language and click OK:
In the "Welcome to the installation wizard..." window, click Further:
In the license agreement window, click I accept:
!! NOW ATTENTION!!
In the following steps, you will be prompted to install sponsored software. You must refuse to install this software! So,
in ALL windows with words Special offer press the button Skip!
As a rule, in windows with a suggestion to install malware, the text is written in English.
If you see windows with words Start Page, Default Search etc., press Decline
When you see a window asking you to select a folder for installation, you can click Further:
Click here Install.
